lkml.org 
[lkml]   [2020]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 10/12] arm64: dts: qcom: angler: Add qcom,msm-id and pmic-id
On Tue 23 Jun 15:48 PDT 2020, Konrad Dybcio wrote:

> Add properties required for the bootloader to select
> the correct bootloader blob. They have been removed from
> the SoC device tree as they should be set on a per-device
> basis.
>
> Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>

Applied, thanks.

> ---
> arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
> index a5f9a6ab512c..baa55643b40f 100644
> --- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
> @@ -11,6 +11,8 @@ / {
> model = "Huawei Nexus 6P";
> compatible = "huawei,angler", "qcom,msm8994";
> /* required for bootloader to select correct board */
> + qcom,msm-id = <207 0x20000>;
> + qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
> qcom,board-id = <8026 0>;
>
> aliases {
> --
> 2.27.0
>

\
 
 \ /
  Last update: 2020-06-24 01:26    [W:0.621 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site