lkml.org 
[lkml]   [2020]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 048/314] scsi: hisi_sas: Do not reset phy timer to wait for stray phy up
Date
From: Luo Jiaxing <luojiaxing@huawei.com>

[ Upstream commit e16b9ed61e078d836a0f24a82080cf29d7539c7e ]

We found out that after phy up, the hardware reports another oob interrupt
but did not follow a phy up interrupt:

oob ready -> phy up -> DEV found -> oob read -> wait phy up -> timeout

We run link reset when wait phy up timeout, and it send a normal disk into
reset processing. So we made some circumvention action in the code, so that
this abnormal oob interrupt will not start the timer to wait for phy up.

Link: https://lore.kernel.org/r/1589552025-165012-2-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 6f4692f0d7143..031aa4043c5ea 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -904,8 +904,11 @@ void hisi_sas_phy_oob_ready(struct hisi_hba *hisi_hba, int phy_no)
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
struct device *dev = hisi_hba->dev;

+ dev_dbg(dev, "phy%d OOB ready\n", phy_no);
+ if (phy->phy_attached)
+ return;
+
if (!timer_pending(&phy->timer)) {
- dev_dbg(dev, "phy%d OOB ready\n", phy_no);
phy->timer.expires = jiffies + HISI_SAS_WAIT_PHYUP_TIMEOUT * HZ;
add_timer(&phy->timer);
}
--
2.25.1


\
 
 \ /
  Last update: 2020-06-23 23:21    [W:1.527 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site