lkml.org 
[lkml]   [2020]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.7 443/477] drm/msm: Check for powered down HW in the devfreq callbacks
Date
From: Jordan Crouse <jcrouse@codeaurora.org>

commit eadf79286a4badebc95af7061530bdb50a7e6f38 upstream.

Writing to the devfreq sysfs nodes while the GPU is powered down can
result in a system crash (on a5xx) or a nasty GMU error (on a6xx):

$ /sys/class/devfreq/5000000.gpu# echo 500000000 > min_freq
[ 104.841625] platform 506a000.gmu: [drm:a6xx_gmu_set_oob]
*ERROR* Timeout waiting for GMU OOB set GPU_DCVS: 0x0

Despite the fact that we carefully try to suspend the devfreq device when
the hardware is powered down there are lots of holes in the governors that
don't check for the suspend state and blindly call into the devfreq
callbacks that end up triggering hardware reads in the GPU driver.

Call pm_runtime_get_if_in_use() in the gpu_busy() and gpu_set_freq()
callbacks to skip the hardware access if it isn't active.

v3: Only check pm_runtime_get_if_in_use() for == 0 per Eric Anholt
v2: Use pm_runtime_get_if_in_use() per Eric Anholt

Cc: stable@vger.kernel.org
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 6 ++++++
drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 8 ++++++++
drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 7 +++++++
3 files changed, 21 insertions(+)

--- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
@@ -1404,6 +1404,10 @@ static unsigned long a5xx_gpu_busy(struc
{
u64 busy_cycles, busy_time;

+ /* Only read the gpu busy if the hardware is already active */
+ if (pm_runtime_get_if_in_use(&gpu->pdev->dev) == 0)
+ return 0;
+
busy_cycles = gpu_read64(gpu, REG_A5XX_RBBM_PERFCTR_RBBM_0_LO,
REG_A5XX_RBBM_PERFCTR_RBBM_0_HI);

@@ -1412,6 +1416,8 @@ static unsigned long a5xx_gpu_busy(struc

gpu->devfreq.busy_cycles = busy_cycles;

+ pm_runtime_put(&gpu->pdev->dev);
+
if (WARN_ON(busy_time > ~0LU))
return ~0LU;

--- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
@@ -108,6 +108,13 @@ static void __a6xx_gmu_set_freq(struct a
struct msm_gpu *gpu = &adreno_gpu->base;
int ret;

+ /*
+ * This can get called from devfreq while the hardware is idle. Don't
+ * bring up the power if it isn't already active
+ */
+ if (pm_runtime_get_if_in_use(gmu->dev) == 0)
+ return;
+
gmu_write(gmu, REG_A6XX_GMU_DCVS_ACK_OPTION, 0);

gmu_write(gmu, REG_A6XX_GMU_DCVS_PERF_SETTING,
@@ -134,6 +141,7 @@ static void __a6xx_gmu_set_freq(struct a
* for now leave it at max so that the performance is nominal.
*/
icc_set_bw(gpu->icc_path, 0, MBps_to_icc(7216));
+ pm_runtime_put(gmu->dev);
}

void a6xx_gmu_set_freq(struct msm_gpu *gpu, unsigned long freq)
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
@@ -810,6 +810,11 @@ static unsigned long a6xx_gpu_busy(struc
struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
u64 busy_cycles, busy_time;

+
+ /* Only read the gpu busy if the hardware is already active */
+ if (pm_runtime_get_if_in_use(a6xx_gpu->gmu.dev) == 0)
+ return 0;
+
busy_cycles = gmu_read64(&a6xx_gpu->gmu,
REG_A6XX_GMU_CX_GMU_POWER_COUNTER_XOCLK_0_L,
REG_A6XX_GMU_CX_GMU_POWER_COUNTER_XOCLK_0_H);
@@ -819,6 +824,8 @@ static unsigned long a6xx_gpu_busy(struc

gpu->devfreq.busy_cycles = busy_cycles;

+ pm_runtime_put(a6xx_gpu->gmu.dev);
+
if (WARN_ON(busy_time > ~0LU))
return ~0LU;


\
 
 \ /
  Last update: 2020-06-23 22:19    [W:1.163 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site