lkml.org 
[lkml]   [2020]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.7 123/477] ALSA: usb-audio: RME Babyface Pro mixer patch
Date
From: Thomas Ebeling <penguins@bollie.de>

[ Upstream commit 3e8f3bd047163d30fb1ad32ca7e4628921555c09 ]

Added mixer quirks to allow controlling the internal DSP of the
RME Babyface Pro and its successor Babyface Pro FS.

Signed-off-by: Thomas Ebeling <penguins@bollie.de>
Link: https://lore.kernel.org/r/20200414211019.qprg7whepg2y7nei@bollie.ca9.eu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/usb/mixer_quirks.c | 418 +++++++++++++++++++++++++++++++++++++++
1 file changed, 418 insertions(+)

diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index a5f65a9a02546..bdff8674942ec 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -2185,6 +2185,421 @@ static int snd_rme_controls_create(struct usb_mixer_interface *mixer)
return 0;
}

+/*
+ * RME Babyface Pro (FS)
+ *
+ * These devices exposes a couple of DSP functions via request to EP0.
+ * Switches are available via control registers, while routing is controlled
+ * by controlling the volume on each possible crossing point.
+ * Volume control is linear, from -inf (dec. 0) to +6dB (dec. 46341) with
+ * 0dB being at dec. 32768.
+ */
+enum {
+ SND_BBFPRO_CTL_REG1 = 0,
+ SND_BBFPRO_CTL_REG2
+};
+
+#define SND_BBFPRO_CTL_REG_MASK 1
+#define SND_BBFPRO_CTL_IDX_MASK 0xff
+#define SND_BBFPRO_CTL_IDX_SHIFT 1
+#define SND_BBFPRO_CTL_VAL_MASK 1
+#define SND_BBFPRO_CTL_VAL_SHIFT 9
+#define SND_BBFPRO_CTL_REG1_CLK_MASTER 0
+#define SND_BBFPRO_CTL_REG1_CLK_OPTICAL 1
+#define SND_BBFPRO_CTL_REG1_SPDIF_PRO 7
+#define SND_BBFPRO_CTL_REG1_SPDIF_EMPH 8
+#define SND_BBFPRO_CTL_REG1_SPDIF_OPTICAL 10
+#define SND_BBFPRO_CTL_REG2_48V_AN1 0
+#define SND_BBFPRO_CTL_REG2_48V_AN2 1
+#define SND_BBFPRO_CTL_REG2_SENS_IN3 2
+#define SND_BBFPRO_CTL_REG2_SENS_IN4 3
+#define SND_BBFPRO_CTL_REG2_PAD_AN1 4
+#define SND_BBFPRO_CTL_REG2_PAD_AN2 5
+
+#define SND_BBFPRO_MIXER_IDX_MASK 0x1ff
+#define SND_BBFPRO_MIXER_VAL_MASK 0x3ffff
+#define SND_BBFPRO_MIXER_VAL_SHIFT 9
+#define SND_BBFPRO_MIXER_VAL_MIN 0 // -inf
+#define SND_BBFPRO_MIXER_VAL_MAX 46341 // +6dB
+
+#define SND_BBFPRO_USBREQ_CTL_REG1 0x10
+#define SND_BBFPRO_USBREQ_CTL_REG2 0x17
+#define SND_BBFPRO_USBREQ_MIXER 0x12
+
+static int snd_bbfpro_ctl_update(struct usb_mixer_interface *mixer, u8 reg,
+ u8 index, u8 value)
+{
+ int err;
+ u16 usb_req, usb_idx, usb_val;
+ struct snd_usb_audio *chip = mixer->chip;
+
+ err = snd_usb_lock_shutdown(chip);
+ if (err < 0)
+ return err;
+
+ if (reg == SND_BBFPRO_CTL_REG1) {
+ usb_req = SND_BBFPRO_USBREQ_CTL_REG1;
+ if (index == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) {
+ usb_idx = 3;
+ usb_val = value ? 3 : 0;
+ } else {
+ usb_idx = 1 << index;
+ usb_val = value ? usb_idx : 0;
+ }
+ } else {
+ usb_req = SND_BBFPRO_USBREQ_CTL_REG2;
+ usb_idx = 1 << index;
+ usb_val = value ? usb_idx : 0;
+ }
+
+ err = snd_usb_ctl_msg(chip->dev,
+ usb_sndctrlpipe(chip->dev, 0), usb_req,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ usb_val, usb_idx, 0, 0);
+
+ snd_usb_unlock_shutdown(chip);
+ return err;
+}
+
+static int snd_bbfpro_ctl_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ u8 reg, idx, val;
+ int pv;
+
+ pv = kcontrol->private_value;
+ reg = pv & SND_BBFPRO_CTL_REG_MASK;
+ idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK;
+ val = kcontrol->private_value >> SND_BBFPRO_CTL_VAL_SHIFT;
+
+ if ((reg == SND_BBFPRO_CTL_REG1 &&
+ idx == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) ||
+ (reg == SND_BBFPRO_CTL_REG2 &&
+ (idx == SND_BBFPRO_CTL_REG2_SENS_IN3 ||
+ idx == SND_BBFPRO_CTL_REG2_SENS_IN4))) {
+ ucontrol->value.enumerated.item[0] = val;
+ } else {
+ ucontrol->value.integer.value[0] = val;
+ }
+ return 0;
+}
+
+static int snd_bbfpro_ctl_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ u8 reg, idx;
+ int pv;
+
+ pv = kcontrol->private_value;
+ reg = pv & SND_BBFPRO_CTL_REG_MASK;
+ idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK;
+
+ if (reg == SND_BBFPRO_CTL_REG1 &&
+ idx == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) {
+ static const char * const texts[2] = {
+ "AutoSync",
+ "Internal"
+ };
+ return snd_ctl_enum_info(uinfo, 1, 2, texts);
+ } else if (reg == SND_BBFPRO_CTL_REG2 &&
+ (idx == SND_BBFPRO_CTL_REG2_SENS_IN3 ||
+ idx == SND_BBFPRO_CTL_REG2_SENS_IN4)) {
+ static const char * const texts[2] = {
+ "-10dBV",
+ "+4dBu"
+ };
+ return snd_ctl_enum_info(uinfo, 1, 2, texts);
+ }
+
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ return 0;
+}
+
+static int snd_bbfpro_ctl_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ int err;
+ u8 reg, idx;
+ int old_value, pv, val;
+
+ struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
+ struct usb_mixer_interface *mixer = list->mixer;
+
+ pv = kcontrol->private_value;
+ reg = pv & SND_BBFPRO_CTL_REG_MASK;
+ idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK;
+ old_value = (pv >> SND_BBFPRO_CTL_VAL_SHIFT) & SND_BBFPRO_CTL_VAL_MASK;
+
+ if ((reg == SND_BBFPRO_CTL_REG1 &&
+ idx == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) ||
+ (reg == SND_BBFPRO_CTL_REG2 &&
+ (idx == SND_BBFPRO_CTL_REG2_SENS_IN3 ||
+ idx == SND_BBFPRO_CTL_REG2_SENS_IN4))) {
+ val = ucontrol->value.enumerated.item[0];
+ } else {
+ val = ucontrol->value.integer.value[0];
+ }
+
+ if (val > 1)
+ return -EINVAL;
+
+ if (val == old_value)
+ return 0;
+
+ kcontrol->private_value = reg
+ | ((idx & SND_BBFPRO_CTL_IDX_MASK) << SND_BBFPRO_CTL_IDX_SHIFT)
+ | ((val & SND_BBFPRO_CTL_VAL_MASK) << SND_BBFPRO_CTL_VAL_SHIFT);
+
+ err = snd_bbfpro_ctl_update(mixer, reg, idx, val);
+ return err < 0 ? err : 1;
+}
+
+static int snd_bbfpro_ctl_resume(struct usb_mixer_elem_list *list)
+{
+ u8 reg, idx;
+ int value, pv;
+
+ pv = list->kctl->private_value;
+ reg = pv & SND_BBFPRO_CTL_REG_MASK;
+ idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK;
+ value = (pv >> SND_BBFPRO_CTL_VAL_SHIFT) & SND_BBFPRO_CTL_VAL_MASK;
+
+ return snd_bbfpro_ctl_update(list->mixer, reg, idx, value);
+}
+
+static int snd_bbfpro_vol_update(struct usb_mixer_interface *mixer, u16 index,
+ u32 value)
+{
+ struct snd_usb_audio *chip = mixer->chip;
+ int err;
+ u16 idx;
+ u16 usb_idx, usb_val;
+ u32 v;
+
+ err = snd_usb_lock_shutdown(chip);
+ if (err < 0)
+ return err;
+
+ idx = index & SND_BBFPRO_MIXER_IDX_MASK;
+ // 18 bit linear volume, split so 2 bits end up in index.
+ v = value & SND_BBFPRO_MIXER_VAL_MASK;
+ usb_idx = idx | (v & 0x3) << 14;
+ usb_val = (v >> 2) & 0xffff;
+
+ err = snd_usb_ctl_msg(chip->dev,
+ usb_sndctrlpipe(chip->dev, 0),
+ SND_BBFPRO_USBREQ_MIXER,
+ USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE,
+ usb_val, usb_idx, 0, 0);
+
+ snd_usb_unlock_shutdown(chip);
+ return err;
+}
+
+static int snd_bbfpro_vol_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.integer.value[0] =
+ kcontrol->private_value >> SND_BBFPRO_MIXER_VAL_SHIFT;
+ return 0;
+}
+
+static int snd_bbfpro_vol_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = SND_BBFPRO_MIXER_VAL_MIN;
+ uinfo->value.integer.max = SND_BBFPRO_MIXER_VAL_MAX;
+ return 0;
+}
+
+static int snd_bbfpro_vol_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ int err;
+ u16 idx;
+ u32 new_val, old_value, uvalue;
+ struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
+ struct usb_mixer_interface *mixer = list->mixer;
+
+ uvalue = ucontrol->value.integer.value[0];
+ idx = kcontrol->private_value & SND_BBFPRO_MIXER_IDX_MASK;
+ old_value = kcontrol->private_value >> SND_BBFPRO_MIXER_VAL_SHIFT;
+
+ if (uvalue > SND_BBFPRO_MIXER_VAL_MAX)
+ return -EINVAL;
+
+ if (uvalue == old_value)
+ return 0;
+
+ new_val = uvalue & SND_BBFPRO_MIXER_VAL_MASK;
+
+ kcontrol->private_value = idx
+ | (new_val << SND_BBFPRO_MIXER_VAL_SHIFT);
+
+ err = snd_bbfpro_vol_update(mixer, idx, new_val);
+ return err < 0 ? err : 1;
+}
+
+static int snd_bbfpro_vol_resume(struct usb_mixer_elem_list *list)
+{
+ int pv = list->kctl->private_value;
+ u16 idx = pv & SND_BBFPRO_MIXER_IDX_MASK;
+ u32 val = (pv >> SND_BBFPRO_MIXER_VAL_SHIFT)
+ & SND_BBFPRO_MIXER_VAL_MASK;
+ return snd_bbfpro_vol_update(list->mixer, idx, val);
+}
+
+// Predfine elements
+static const struct snd_kcontrol_new snd_bbfpro_ctl_control = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .index = 0,
+ .info = snd_bbfpro_ctl_info,
+ .get = snd_bbfpro_ctl_get,
+ .put = snd_bbfpro_ctl_put
+};
+
+static const struct snd_kcontrol_new snd_bbfpro_vol_control = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .index = 0,
+ .info = snd_bbfpro_vol_info,
+ .get = snd_bbfpro_vol_get,
+ .put = snd_bbfpro_vol_put
+};
+
+static int snd_bbfpro_ctl_add(struct usb_mixer_interface *mixer, u8 reg,
+ u8 index, char *name)
+{
+ struct snd_kcontrol_new knew = snd_bbfpro_ctl_control;
+
+ knew.name = name;
+ knew.private_value = (reg & SND_BBFPRO_CTL_REG_MASK)
+ | ((index & SND_BBFPRO_CTL_IDX_MASK)
+ << SND_BBFPRO_CTL_IDX_SHIFT);
+
+ return add_single_ctl_with_resume(mixer, 0, snd_bbfpro_ctl_resume,
+ &knew, NULL);
+}
+
+static int snd_bbfpro_vol_add(struct usb_mixer_interface *mixer, u16 index,
+ char *name)
+{
+ struct snd_kcontrol_new knew = snd_bbfpro_vol_control;
+
+ knew.name = name;
+ knew.private_value = index & SND_BBFPRO_MIXER_IDX_MASK;
+
+ return add_single_ctl_with_resume(mixer, 0, snd_bbfpro_vol_resume,
+ &knew, NULL);
+}
+
+static int snd_bbfpro_controls_create(struct usb_mixer_interface *mixer)
+{
+ int err, i, o;
+ char name[48];
+
+ static const char * const input[] = {
+ "AN1", "AN2", "IN3", "IN4", "AS1", "AS2", "ADAT3",
+ "ADAT4", "ADAT5", "ADAT6", "ADAT7", "ADAT8"};
+
+ static const char * const output[] = {
+ "AN1", "AN2", "PH3", "PH4", "AS1", "AS2", "ADAT3", "ADAT4",
+ "ADAT5", "ADAT6", "ADAT7", "ADAT8"};
+
+ for (o = 0 ; o < 12 ; ++o) {
+ for (i = 0 ; i < 12 ; ++i) {
+ // Line routing
+ snprintf(name, sizeof(name),
+ "%s-%s-%s Playback Volume",
+ (i < 2 ? "Mic" : "Line"),
+ input[i], output[o]);
+ err = snd_bbfpro_vol_add(mixer, (26 * o + i), name);
+ if (err < 0)
+ return err;
+
+ // PCM routing... yes, it is output remapping
+ snprintf(name, sizeof(name),
+ "PCM-%s-%s Playback Volume",
+ output[i], output[o]);
+ err = snd_bbfpro_vol_add(mixer, (26 * o + 12 + i),
+ name);
+ if (err < 0)
+ return err;
+ }
+ }
+
+ // Control Reg 1
+ err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1,
+ SND_BBFPRO_CTL_REG1_CLK_OPTICAL,
+ "Sample Clock Source");
+ if (err < 0)
+ return err;
+
+ err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1,
+ SND_BBFPRO_CTL_REG1_SPDIF_PRO,
+ "IEC958 Pro Mask");
+ if (err < 0)
+ return err;
+
+ err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1,
+ SND_BBFPRO_CTL_REG1_SPDIF_EMPH,
+ "IEC958 Emphasis");
+ if (err < 0)
+ return err;
+
+ err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1,
+ SND_BBFPRO_CTL_REG1_SPDIF_OPTICAL,
+ "IEC958 Switch");
+ if (err < 0)
+ return err;
+
+ // Control Reg 2
+ err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
+ SND_BBFPRO_CTL_REG2_48V_AN1,
+ "Mic-AN1 48V");
+ if (err < 0)
+ return err;
+
+ err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
+ SND_BBFPRO_CTL_REG2_48V_AN2,
+ "Mic-AN2 48V");
+ if (err < 0)
+ return err;
+
+ err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
+ SND_BBFPRO_CTL_REG2_SENS_IN3,
+ "Line-IN3 Sens.");
+ if (err < 0)
+ return err;
+
+ err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
+ SND_BBFPRO_CTL_REG2_SENS_IN4,
+ "Line-IN4 Sens.");
+ if (err < 0)
+ return err;
+
+ err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
+ SND_BBFPRO_CTL_REG2_PAD_AN1,
+ "Mic-AN1 PAD");
+ if (err < 0)
+ return err;
+
+ err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
+ SND_BBFPRO_CTL_REG2_PAD_AN2,
+ "Mic-AN2 PAD");
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
{
int err = 0;
@@ -2286,6 +2701,9 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
case USB_ID(0x0194f, 0x010c): /* Presonus Studio 1810c */
err = snd_sc1810_init_mixer(mixer);
break;
+ case USB_ID(0x2a39, 0x3fb0): /* RME Babyface Pro FS */
+ err = snd_bbfpro_controls_create(mixer);
+ break;
}

return err;
--
2.25.1


\
 
 \ /
  Last update: 2020-06-23 22:07    [W:1.055 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site