lkml.org 
[lkml]   [2020]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 5.7 121/477] ARM: dts: sun8i-h2-plus-bananapi-m2-zero: Fix led polarity
    Date
    From: Vincent Stehlé <vincent.stehle@laposte.net>

    [ Upstream commit 34b6826df7462c541752cf8b1de2691b26d78ae0 ]

    The PWR-LED on the bananapi m2 zero board is on when gpio PL10 is low.
    This has been verified on a board and in the schematics [1].

    [1]: http://wiki.banana-pi.org/Banana_Pi_BPI-M2_ZERO#Documents

    Fixes: 8b8061fcbfae ("ARM: dts: sun8i: h2+: add support for Banana Pi M2 Zero board")
    Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
    Cc: Icenowy Zheng <icenowy@aosc.io>
    Cc: Maxime Ripard <mripard@kernel.org>
    Signed-off-by: Maxime Ripard <maxime@cerno.tech>
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 2 +-
    1 file changed, 1 insertion(+), 1 deletion(-)

    diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
    index d277d043031b2..4c6704e4c57ec 100644
    --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
    +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
    @@ -31,7 +31,7 @@

    pwr_led {
    label = "bananapi-m2-zero:red:pwr";
    - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
    + gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */
    default-state = "on";
    };
    };
    --
    2.25.1


    \
     
     \ /
      Last update: 2020-06-23 22:07    [W:4.330 / U:1.064 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site