lkml.org 
[lkml]   [2020]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] thunderbolt: Add support for separating the flush to SPI and authenticate
On Mon, Jun 22, 2020 at 09:30:34AM -0500, Mario Limonciello wrote:
> This allows userspace to have a shorter period of time that the device
> is unusable and to call it at a more convenient time.
>
> For example flushing the image may happen while the user is using the
> machine and authenticating/rebooting may happen while logging out.
>
> Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
> ---
> .../ABI/testing/sysfs-bus-thunderbolt | 11 ++++-
> drivers/thunderbolt/switch.c | 43 ++++++++++++-------
> drivers/thunderbolt/tb.h | 1 +
> 3 files changed, 38 insertions(+), 17 deletions(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt
> index 82e80de78dd0..26b15cbc9881 100644
> --- a/Documentation/ABI/testing/sysfs-bus-thunderbolt
> +++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt
> @@ -178,11 +178,18 @@ KernelVersion: 4.13
> Contact: thunderbolt-software@lists.01.org
> Description: When new NVM image is written to the non-active NVM
> area (through non_activeX NVMem device), the
> - authentication procedure is started by writing 1 to
> - this file. If everything goes well, the device is
> + authentication procedure is started by writing to
> + this file.
> + If everything goes well, the device is
> restarted with the new NVM firmware. If the image
> verification fails an error code is returned instead.
>
> + This file will accept writing values "1" or "2"
> + - Writing "1" will flush the image to the storage
> + area and authenticate the image in one action.
> + - Writing "2" will only flush the image to the storage
> + area.

Does this ("2") also do the basic validation? I think it does so
probably good to mention that here.

> +
> When read holds status of the last authentication
> operation if an error occurred during the process. This
> is directly the status value from the DMA configuration
> diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
> index d7d60cd9226f..4c476a58db38 100644
> --- a/drivers/thunderbolt/switch.c
> +++ b/drivers/thunderbolt/switch.c
> @@ -27,6 +27,11 @@
> #define NVM_MIN_SIZE SZ_32K
> #define NVM_MAX_SIZE SZ_512K
>
> +enum nvm_write_ops {
> + WRITE_AND_AUTHENTICATE = 1,
> + WRITE_ONLY = 2,
> +};
> +
> static DEFINE_IDA(nvm_ida);
>
> struct nvm_auth_status {
> @@ -164,8 +169,12 @@ static int nvm_validate_and_write(struct tb_switch *sw)
> }
>
> if (tb_switch_is_usb4(sw))
> - return usb4_switch_nvm_write(sw, 0, buf, image_size);
> - return dma_port_flash_write(sw->dma_port, 0, buf, image_size);
> + ret = usb4_switch_nvm_write(sw, 0, buf, image_size);
> + else
> + ret = dma_port_flash_write(sw->dma_port, 0, buf, image_size);
> + if (!ret)
> + sw->nvm->flushed = true;
> + return ret;
> }
>
> static int nvm_authenticate_host_dma_port(struct tb_switch *sw)
> @@ -371,6 +380,7 @@ static int tb_switch_nvm_write(void *priv, unsigned int offset, void *val,
> }
> }
>
> + sw->nvm->flushed = false;
> sw->nvm->buf_data_size = offset + bytes;
> memcpy(sw->nvm->buf + offset, val, bytes);
>
> @@ -1536,7 +1546,7 @@ static ssize_t nvm_authenticate_store(struct device *dev,
> struct device_attribute *attr, const char *buf, size_t count)
> {
> struct tb_switch *sw = tb_to_switch(dev);
> - bool val;
> + int val;
> int ret;
>
> pm_runtime_get_sync(&sw->dev);
> @@ -1552,25 +1562,28 @@ static ssize_t nvm_authenticate_store(struct device *dev,
> goto exit_unlock;
> }
>
> - ret = kstrtobool(buf, &val);
> + ret = kstrtoint(buf, 10, &val);
> if (ret)
> goto exit_unlock;
>
> /* Always clear the authentication status */
> nvm_clear_auth_status(sw);
>
> - if (val) {
> - if (!sw->nvm->buf) {
> - ret = -EINVAL;
> - goto exit_unlock;
> - }
> -
> - ret = nvm_validate_and_write(sw);
> - if (ret)
> - goto exit_unlock;
> + if (val > 0) {
> + if (!sw->nvm->flushed) {
> + if (!sw->nvm->buf) {
> + ret = -EINVAL;
> + goto exit_unlock;
> + }
>
> - sw->nvm->authenticating = true;
> - ret = nvm_authenticate(sw);
> + ret = nvm_validate_and_write(sw);
> + if (ret || val == WRITE_ONLY)
> + goto exit_unlock;
> + }
> + if (val == WRITE_AND_AUTHENTICATE) {
> + sw->nvm->authenticating = true;
> + ret = nvm_authenticate(sw);
> + }
> }
>
> exit_unlock:
> diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h
> index 2eb2bcd3cca3..222ec19737fa 100644
> --- a/drivers/thunderbolt/tb.h
> +++ b/drivers/thunderbolt/tb.h
> @@ -40,6 +40,7 @@ struct tb_switch_nvm {
> void *buf;
> size_t buf_data_size;
> bool authenticating;
> + bool flushed;

Please add kernel-doc about this.

> };
>
> #define TB_SWITCH_KEY_SIZE 32
> --
> 2.25.1

\
 
 \ /
  Last update: 2020-06-22 18:43    [W:3.054 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site