lkml.org 
[lkml]   [2020]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 3/3] arm64: dts: realtek: Add RTD1319 SoC and Realtek Pym Particles EVB
Date
From: James Tai <james.tai@realtek.com>

Add Device Trees for Realtek RTD1319 SoC family, RTD1319 SoC and
Realtek Pym Particles EVB.

Signed-off-by: James Tai <james.tai@realtek.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v3 -> v4:
* Updated Realtek copyright for 2 out of 3 files from v3
* Renamed from rtd1319-pymparticle.dts to rtd1319-pymparticles.dts
* Updated compatible from pymparticle to pym-particles
* Updated PMU compatible from armv8-pmuv3 to cortex-a55-pmu (Robin)

v2 -> v3:
* Add virtual maintenance interrupt for architecture timer
* Correct the GIC redistributor address range

v1 -> v2:
* Reserve the boot ROM address
* Reserve boot loader address
* Reserve audio/video FW address
* Reserve RPC and ring buffer address
* Reserve TEE address
* Support 1 GiB RAM by default
* Reduce rbus range to 2 MiB
* Apply the syscon for ISO,MISC,CRT,SB2,SCPU_WRAPPER
* Adjust compatible strings order in document

arch/arm64/boot/dts/realtek/Makefile | 2 +
.../boot/dts/realtek/rtd1319-pymparticles.dts | 43 ++++
arch/arm64/boot/dts/realtek/rtd1319.dtsi | 12 +
arch/arm64/boot/dts/realtek/rtd13xx.dtsi | 213 ++++++++++++++++++
4 files changed, 270 insertions(+)
create mode 100644 arch/arm64/boot/dts/realtek/rtd1319-pymparticles.dts
create mode 100644 arch/arm64/boot/dts/realtek/rtd1319.dtsi
create mode 100644 arch/arm64/boot/dts/realtek/rtd13xx.dtsi

diff --git a/arch/arm64/boot/dts/realtek/Makefile b/arch/arm64/boot/dts/realtek/Makefile
index ef8d8fcbaa05..83708596726d 100644
--- a/arch/arm64/boot/dts/realtek/Makefile
+++ b/arch/arm64/boot/dts/realtek/Makefile
@@ -9,6 +9,8 @@ dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-zidoo-x9s.dtb

dtb-$(CONFIG_ARCH_REALTEK) += rtd1296-ds418.dtb

+dtb-$(CONFIG_ARCH_REALTEK) += rtd1319-pymparticles.dtb
+
dtb-$(CONFIG_ARCH_REALTEK) += rtd1395-bpi-m4.dtb
dtb-$(CONFIG_ARCH_REALTEK) += rtd1395-lionskin.dtb

diff --git a/arch/arm64/boot/dts/realtek/rtd1319-pymparticles.dts b/arch/arm64/boot/dts/realtek/rtd1319-pymparticles.dts
new file mode 100644
index 000000000000..e0b3c3707a85
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1319-pymparticles.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2019-2020 Realtek Semiconductor Corp.
+ */
+
+/dts-v1/;
+
+#include "rtd1319.dtsi"
+
+/ {
+ compatible = "realtek,pym-particles", "realtek,rtd1319";
+ model = "Realtek Pym Particles EVB";
+
+ memory@2e000 {
+ device_type = "memory";
+ reg = <0x2e000 0x3ffd2000>; /* boot ROM to 1 GiB or 2 GiB */
+ };
+
+ chosen {
+ stdout-path = "serial0:460800n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+};
+
+/* debug console (J1) */
+&uart0 {
+ status = "okay";
+};
+
+/* M.2 slots (CON2, CON8) and J14 */
+&uart1 {
+ status = "disabled";
+};
+
+/* GPIO connector (T1) */
+&uart2 {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1319.dtsi b/arch/arm64/boot/dts/realtek/rtd1319.dtsi
new file mode 100644
index 000000000000..1dcee00009cd
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1319.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD1319 SoC
+ *
+ * Copyright (c) 2019 Realtek Semiconductor Corp.
+ */
+
+#include "rtd13xx.dtsi"
+
+/ {
+ compatible = "realtek,rtd1319";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd13xx.dtsi b/arch/arm64/boot/dts/realtek/rtd13xx.dtsi
new file mode 100644
index 000000000000..8c5b6fc7b8eb
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd13xx.dtsi
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD13xx SoC family
+ *
+ * Copyright (c) 2019-2020 Realtek Semiconductor Corp.
+ */
+
+/memreserve/ 0x0000000000000000 0x000000000002e000; /* Boot ROM */
+/memreserve/ 0x000000000002e000 0x0000000000100000; /* Boot loader */
+/memreserve/ 0x000000000f400000 0x0000000000500000; /* Video FW */
+/memreserve/ 0x000000000f900000 0x0000000000500000; /* Audio FW */
+/memreserve/ 0x0000000010000000 0x0000000000014000; /* Audio FW RAM */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ rpc_comm: rpc@3f000 {
+ reg = <0x3f000 0x1000>;
+ };
+
+ rpc_ringbuf: rpc@1ffe000 {
+ reg = <0x1ffe000 0x4000>;
+ };
+
+ tee: tee@10100000 {
+ reg = <0x10100000 0xf00000>;
+ no-map;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x100>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x200>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x300>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ l2: l2-cache {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ arm_pmu: pmu {
+ compatible = "arm,cortex-a55-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ osc27M: osc {
+ compatible = "fixed-clock";
+ clock-frequency = <27000000>;
+ clock-output-names = "osc27M";
+ #clock-cells = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x0002e000>, /* boot ROM */
+ <0xff100000 0xff100000 0x00200000>, /* GIC */
+ <0x98000000 0x98000000 0x00200000>; /* rbus */
+
+ rbus: bus@98000000 {
+ compatible = "simple-bus";
+ reg = <0x98000000 0x200000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x98000000 0x200000>;
+
+ crt: syscon@0 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0x1000>;
+ reg-io-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1000>;
+ };
+
+ iso: syscon@7000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x7000 0x1000>;
+ reg-io-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x7000 0x1000>;
+ };
+
+ sb2: syscon@1a000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x1a000 0x1000>;
+ reg-io-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1a000 0x1000>;
+ };
+
+ misc: syscon@1b000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x1b000 0x1000>;
+ reg-io-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1b000 0x1000>;
+ };
+
+ scpu_wrapper: syscon@1d000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x1d000 0x1000>;
+ reg-io-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1d000 0x1000>;
+ };
+ };
+
+ gic: interrupt-controller@ff100000 {
+ compatible = "arm,gic-v3";
+ reg = <0xff100000 0x10000>,
+ <0xff140000 0x80000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+ };
+};
+
+&iso {
+ uart0: serial0@800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x800 0x400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <432000000>;
+ status = "disabled";
+ };
+};
+
+&misc {
+ uart1: serial1@200 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x200 0x400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <432000000>;
+ status = "disabled";
+ };
+
+ uart2: serial2@400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x400 0x400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <432000000>;
+ status = "disabled";
+ };
+};
--
2.26.2
\
 
 \ /
  Last update: 2020-06-22 16:27    [W:1.038 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site