lkml.org 
[lkml]   [2020]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 3/4] spi: spi-fsl-dspi: Fix external abort on interrupt in resume or exit paths
On Mon, 22 Jun 2020 at 14:07, Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> If shared interrupt comes late, during probe error path or device remove
> (could be triggered with CONFIG_DEBUG_SHIRQ), the interrupt handler
> dspi_interrupt() will access registers with the clock being disabled.
> This leads to external abort on non-linefetch on Toradex Colibri VF50
> module (with Vybrid VF5xx):
>
> $ echo 4002d000.spi > /sys/devices/platform/soc/40000000.bus/4002d000.spi/driver/unbind
>
> Unhandled fault: external abort on non-linefetch (0x1008) at 0x8887f02c
> Internal error: : 1008 [#1] ARM
> Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
> Backtrace:
> (regmap_mmio_read32le)
> (regmap_mmio_read)
> (_regmap_bus_reg_read)
> (_regmap_read)
> (regmap_read)
> (dspi_interrupt)
> (free_irq)
> (devm_irq_release)
> (release_nodes)
> (devres_release_all)
> (device_release_driver_internal)
>
> The resource-managed framework should not be used for shared interrupt
> handling, because the interrupt handler might be called after releasing
> other resources and disabling clocks.
>
> Similar bug could happen during suspend - the shared interrupt handler
> could be invoked after suspending the device. Each device sharing this
> interrupt line should disable the IRQ during suspend so handler will be
> invoked only in following cases:
> 1. None suspended,
> 2. All devices resumed.
>
> Fixes: 349ad66c0ab0 ("spi:Add Freescale DSPI driver for Vybrid VF610 platform")
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>
> ---

Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>

>
> Changes since v3:
> 1. Use simpler if (dspi->irq).
>
> Changes since v2:
> 1. Go back to v1 and use non-devm interface,
> 2. Fix also suspend/resume paths.
>
> Changes since v1:
> 1. Disable the IRQ instead of using non-devm interface.
> ---
> drivers/spi/spi-fsl-dspi.c | 17 +++++++++++++----
> 1 file changed, 13 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
> index ec7919d9c0d9..e0b30e4b1b69 100644
> --- a/drivers/spi/spi-fsl-dspi.c
> +++ b/drivers/spi/spi-fsl-dspi.c
> @@ -1109,6 +1109,8 @@ static int dspi_suspend(struct device *dev)
> struct spi_controller *ctlr = dev_get_drvdata(dev);
> struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
>
> + if (dspi->irq)
> + disable_irq(dspi->irq);
> spi_controller_suspend(ctlr);
> clk_disable_unprepare(dspi->clk);
>
> @@ -1129,6 +1131,8 @@ static int dspi_resume(struct device *dev)
> if (ret)
> return ret;
> spi_controller_resume(ctlr);
> + if (dspi->irq)
> + enable_irq(dspi->irq);
>
> return 0;
> }
> @@ -1385,8 +1389,8 @@ static int dspi_probe(struct platform_device *pdev)
> goto poll_mode;
> }
>
> - ret = devm_request_irq(&pdev->dev, dspi->irq, dspi_interrupt,
> - IRQF_SHARED, pdev->name, dspi);
> + ret = request_threaded_irq(dspi->irq, dspi_interrupt, NULL,
> + IRQF_SHARED, pdev->name, dspi);
> if (ret < 0) {
> dev_err(&pdev->dev, "Unable to attach DSPI interrupt\n");
> goto out_clk_put;
> @@ -1400,7 +1404,7 @@ static int dspi_probe(struct platform_device *pdev)
> ret = dspi_request_dma(dspi, res->start);
> if (ret < 0) {
> dev_err(&pdev->dev, "can't get dma channels\n");
> - goto out_clk_put;
> + goto out_free_irq;
> }
> }
>
> @@ -1415,11 +1419,14 @@ static int dspi_probe(struct platform_device *pdev)
> ret = spi_register_controller(ctlr);
> if (ret != 0) {
> dev_err(&pdev->dev, "Problem registering DSPI ctlr\n");
> - goto out_clk_put;
> + goto out_free_irq;
> }
>
> return ret;
>
> +out_free_irq:
> + if (dspi->irq)
> + free_irq(dspi->irq, dspi);
> out_clk_put:
> clk_disable_unprepare(dspi->clk);
> out_ctlr_put:
> @@ -1445,6 +1452,8 @@ static int dspi_remove(struct platform_device *pdev)
> regmap_update_bits(dspi->regmap, SPI_MCR, SPI_MCR_HALT, SPI_MCR_HALT);
>
> dspi_release_dma(dspi);
> + if (dspi->irq)
> + free_irq(dspi->irq, dspi);
> clk_disable_unprepare(dspi->clk);
>
> return 0;
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2020-06-22 13:17    [W:0.146 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site