lkml.org 
[lkml]   [2020]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH tip/core/rcu 07/10] docs: RCU: Convert stallwarn.txt to ReST
Date
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

- Add a SPDX header;
- Adjust document and section titles;
- Fix list markups;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to RCU/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
---
Documentation/RCU/index.rst | 1 +
Documentation/RCU/{stallwarn.txt => stallwarn.rst} | 55 +++++++++++++---------
kernel/rcu/tree_stall.h | 4 +-
3 files changed, 37 insertions(+), 23 deletions(-)
rename Documentation/RCU/{stallwarn.txt => stallwarn.rst} (90%)

diff --git a/Documentation/RCU/index.rst b/Documentation/RCU/index.rst
index 9a1d51f..e703d3d 100644
--- a/Documentation/RCU/index.rst
+++ b/Documentation/RCU/index.rst
@@ -20,6 +20,7 @@ RCU concepts
rculist_nulls
rcuref
torture
+ stallwarn
listRCU
NMI-RCU
UP
diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.rst
similarity index 90%
rename from Documentation/RCU/stallwarn.txt
rename to Documentation/RCU/stallwarn.rst
index a360a87..08bc9ae 100644
--- a/Documentation/RCU/stallwarn.txt
+++ b/Documentation/RCU/stallwarn.rst
@@ -1,4 +1,8 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==============================
Using RCU's CPU Stall Detector
+==============================

This document first discusses what sorts of issues RCU's CPU stall
detector can locate, and then discusses kernel parameters and Kconfig
@@ -7,39 +11,40 @@ this document explains the stall detector's "splat" format.


What Causes RCU CPU Stall Warnings?
+===================================

So your kernel printed an RCU CPU stall warning. The next question is
"What caused it?" The following problems can result in RCU CPU stall
warnings:

-o A CPU looping in an RCU read-side critical section.
+- A CPU looping in an RCU read-side critical section.

-o A CPU looping with interrupts disabled.
+- A CPU looping with interrupts disabled.

-o A CPU looping with preemption disabled.
+- A CPU looping with preemption disabled.

-o A CPU looping with bottom halves disabled.
+- A CPU looping with bottom halves disabled.

-o For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the kernel
+- For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the kernel
without invoking schedule(). If the looping in the kernel is
really expected and desirable behavior, you might need to add
some calls to cond_resched().

-o Booting Linux using a console connection that is too slow to
+- Booting Linux using a console connection that is too slow to
keep up with the boot-time console-message rate. For example,
a 115Kbaud serial console can be -way- too slow to keep up
with boot-time message rates, and will frequently result in
RCU CPU stall warning messages. Especially if you have added
debug printk()s.

-o Anything that prevents RCU's grace-period kthreads from running.
+- Anything that prevents RCU's grace-period kthreads from running.
This can result in the "All QSes seen" console-log message.
This message will include information on when the kthread last
ran and how often it should be expected to run. It can also
- result in the "rcu_.*kthread starved for" console-log message,
+ result in the ``rcu_.*kthread starved for`` console-log message,
which will include additional debugging information.

-o A CPU-bound real-time task in a CONFIG_PREEMPT kernel, which might
+- A CPU-bound real-time task in a CONFIG_PREEMPT kernel, which might
happen to preempt a low-priority task in the middle of an RCU
read-side critical section. This is especially damaging if
that low-priority task is not permitted to run on any other CPU,
@@ -48,7 +53,7 @@ o A CPU-bound real-time task in a CONFIG_PREEMPT kernel, which might
While the system is in the process of running itself out of
memory, you might see stall-warning messages.

-o A CPU-bound real-time task in a CONFIG_PREEMPT_RT kernel that
+- A CPU-bound real-time task in a CONFIG_PREEMPT_RT kernel that
is running at a higher priority than the RCU softirq threads.
This will prevent RCU callbacks from ever being invoked,
and in a CONFIG_PREEMPT_RCU kernel will further prevent
@@ -63,7 +68,7 @@ o A CPU-bound real-time task in a CONFIG_PREEMPT_RT kernel that
can increase your system's context-switch rate and thus degrade
performance.

-o A periodic interrupt whose handler takes longer than the time
+- A periodic interrupt whose handler takes longer than the time
interval between successive pairs of interrupts. This can
prevent RCU's kthreads and softirq handlers from running.
Note that certain high-overhead debugging options, for example
@@ -71,20 +76,20 @@ o A periodic interrupt whose handler takes longer than the time
considerably longer than normal, which can in turn result in
RCU CPU stall warnings.

-o Testing a workload on a fast system, tuning the stall-warning
+- Testing a workload on a fast system, tuning the stall-warning
timeout down to just barely avoid RCU CPU stall warnings, and then
running the same workload with the same stall-warning timeout on a
slow system. Note that thermal throttling and on-demand governors
can cause a single system to be sometimes fast and sometimes slow!

-o A hardware or software issue shuts off the scheduler-clock
+- A hardware or software issue shuts off the scheduler-clock
interrupt on a CPU that is not in dyntick-idle mode. This
problem really has happened, and seems to be most likely to
result in RCU CPU stall warnings for CONFIG_NO_HZ_COMMON=n kernels.

-o A bug in the RCU implementation.
+- A bug in the RCU implementation.

-o A hardware failure. This is quite unlikely, but has occurred
+- A hardware failure. This is quite unlikely, but has occurred
at least once in real life. A CPU failed in a running system,
becoming unresponsive, but not causing an immediate crash.
This resulted in a series of RCU CPU stall warnings, eventually
@@ -109,6 +114,7 @@ see include/trace/events/rcu.h.


Fine-Tuning the RCU CPU Stall Detector
+======================================

The rcuupdate.rcu_cpu_stall_suppress module parameter disables RCU's
CPU stall detector, which detects conditions that unduly delay RCU grace
@@ -118,6 +124,7 @@ The stall detector's idea of what constitutes "unduly delayed" is
controlled by a set of kernel configuration variables and cpp macros:

CONFIG_RCU_CPU_STALL_TIMEOUT
+----------------------------

This kernel configuration parameter defines the period of time
that RCU will wait from the beginning of a grace period until it
@@ -137,6 +144,7 @@ CONFIG_RCU_CPU_STALL_TIMEOUT
/sys/module/rcupdate/parameters/rcu_cpu_stall_suppress.

RCU_STALL_DELAY_DELTA
+---------------------

Although the lockdep facility is extremely useful, it does add
some overhead. Therefore, under CONFIG_PROVE_RCU, the
@@ -145,6 +153,7 @@ RCU_STALL_DELAY_DELTA
macro, not a kernel configuration parameter.)

RCU_STALL_RAT_DELAY
+-------------------

The CPU stall detector tries to make the offending CPU print its
own warnings, as this often gives better-quality stack traces.
@@ -155,6 +164,7 @@ RCU_STALL_RAT_DELAY
parameter.)

rcupdate.rcu_task_stall_timeout
+-------------------------------

This boot/sysfs parameter controls the RCU-tasks stall warning
interval. A value of zero or less suppresses RCU-tasks stall
@@ -168,9 +178,10 @@ rcupdate.rcu_task_stall_timeout


Interpreting RCU's CPU Stall-Detector "Splats"
+==============================================

For non-RCU-tasks flavors of RCU, when a CPU detects that it is stalling,
-it will print a message similar to the following:
+it will print a message similar to the following::

INFO: rcu_sched detected stalls on CPUs/tasks:
2-...: (3 GPs behind) idle=06c/0/0 softirq=1453/1455 fqs=0
@@ -223,7 +234,7 @@ an estimate of the total number of RCU callbacks queued across all CPUs
(625 in this case).

In kernels with CONFIG_RCU_FAST_NO_HZ, more information is printed
-for each CPU:
+for each CPU::

0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 softirq=82/543 last_accelerate: a345/d342 dyntick_enabled: 1

@@ -235,7 +246,7 @@ processing is enabled.

If the grace period ends just as the stall warning starts printing,
there will be a spurious stall-warning message, which will include
-the following:
+the following::

INFO: Stall ended before state dump start

@@ -248,7 +259,7 @@ which is overkill for this sort of problem.

If all CPUs and tasks have passed through quiescent states, but the
grace period has nevertheless failed to end, the stall-warning splat
-will include something like the following:
+will include something like the following::

All QSes seen, last rcu_preempt kthread activity 23807 (4297905177-4297881370), jiffies_till_next_fqs=3, root ->qsmask 0x0

@@ -261,7 +272,7 @@ which is way less than 23807. Finally, the root rcu_node structure's

If the relevant grace-period kthread has been unable to run prior to
the stall warning, as was the case in the "All QSes seen" line above,
-the following additional line is printed:
+the following additional line is printed::

kthread starved for 23807 jiffies! g7075 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x1 ->cpu=5

@@ -276,6 +287,7 @@ kthread last ran on CPU 5.


Multiple Warnings From One Stall
+================================

If a stall lasts long enough, multiple stall-warning messages will be
printed for it. The second and subsequent messages are printed at
@@ -285,9 +297,10 @@ of the stall and the first message.


Stall Warnings for Expedited Grace Periods
+==========================================

If an expedited grace period detects a stall, it will place a message
-like the following in dmesg:
+like the following in dmesg::

INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 7-... } 21119 jiffies s: 73 root: 0x2/.

diff --git a/kernel/rcu/tree_stall.h b/kernel/rcu/tree_stall.h
index 54a6dba..b04256c 100644
--- a/kernel/rcu/tree_stall.h
+++ b/kernel/rcu/tree_stall.h
@@ -468,7 +468,7 @@ static void print_other_cpu_stall(unsigned long gp_seq, unsigned long gps)

/*
* OK, time to rat on our buddy...
- * See Documentation/RCU/stallwarn.txt for info on how to debug
+ * See Documentation/RCU/stallwarn.rst for info on how to debug
* RCU CPU stall warnings.
*/
pr_err("INFO: %s detected stalls on CPUs/tasks:\n", rcu_state.name);
@@ -535,7 +535,7 @@ static void print_cpu_stall(unsigned long gps)

/*
* OK, time to rat on ourselves...
- * See Documentation/RCU/stallwarn.txt for info on how to debug
+ * See Documentation/RCU/stallwarn.rst for info on how to debug
* RCU CPU stall warnings.
*/
pr_err("INFO: %s self-detected stall on CPU\n", rcu_state.name);
--
2.9.5
\
 
 \ /
  Last update: 2020-06-23 02:10    [W:0.070 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site