lkml.org 
[lkml]   [2020]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 1/4] iio: chemical: scd30: add core driver
On Sat, Jun 20, 2020 at 05:25:02PM +0100, Jonathan Cameron wrote:
> On Sun, 7 Jun 2020 19:58:09 +0200
> Tomasz Duszynski <tomasz.duszynski@octakon.com> wrote:
>
> > Add Sensirion SCD30 carbon dioxide core driver.
> >
> > Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
>
> A few things I'd missed showed up in warnings when I applied this and
> ran a sparse check. Please fix up and send a v6.
> Also sanity check the rest with sparse. Note if I'd missed this 0-day
> would have sent use these warnings.
>

Ah, forgot to add C=2 to prior building. Thanks for catching this.

> Thanks,
>
> Jonathan
>
> > +
> > +static int scd30_read_meas(struct scd30_state *state)
> > +{
> > + int i, ret;
> > +
> > + ret = state->command(state, CMD_READ_MEAS, 0, state->meas, sizeof(state->meas));
> > + if (ret)
> > + return ret;
> > +
> > + be32_to_cpu_array(state->meas, state->meas, ARRAY_SIZE(state->meas));
>
> The type of the input to the above has the wrong endian markings.
>
> CHECK drivers/iio/chemical/scd30_core.c
> drivers/iio/chemical/scd30_core.c:123:40: warning: incorrect type in argument 2 (different base types)
> drivers/iio/chemical/scd30_core.c:123:40: expected restricted __be32 const [usertype] *src
> drivers/iio/chemical/scd30_core.c:123:40: got int *
>
> Whilst you could use a cast, it would be tidier to use an array of __be32.
>

Here's the only place where it's a __be32. All other places assume
cpu endianess which means changing array type generates a few other warnings
here and there. So I'd prefer to be lazy here and use a cast :).

> > +
> > + for (i = 0; i < ARRAY_SIZE(state->meas); i++)
> > + state->meas[i] = scd30_float_to_fp(state->meas[i]);
> > +
> > + /*
> > + * co2 is left unprocessed while temperature and humidity are scaled
> > + * to milli deg C and milli percent respectively.
> > + */
> > + state->meas[SCD30_TEMP] *= 10;
> > + state->meas[SCD30_HR] *= 10;
> > +
> > + return 0;
> > +}
> > +
>
> ...
>
> > +
> > +static irqreturn_t scd30_trigger_handler(int irq, void *p)
> > +{
> > + struct iio_poll_func *pf = p;
> > + struct iio_dev *indio_dev = pf->indio_dev;
> > + struct scd30_state *state = iio_priv(indio_dev);
> > + struct {
> > + int data[SCD30_MEAS_COUNT];
> > + s64 ts __aligned(8);
> > + } scan = { 0, };
> should be scan = { {0, }, }; or something like that
> as first element happens to be an array.
>
> Actually there is padding in here you need to zero I think.
> So memset is a better bet.
>

Sure.

> > + int ret;
> > +
> > + mutex_lock(&state->lock);
> > + if (!iio_trigger_using_own(indio_dev))
> > + ret = scd30_read_poll(state);
> > + else
> > + ret = scd30_read_meas(state);
> > + memcpy(scan.data, state->meas, sizeof(state->meas));
> > + mutex_unlock(&state->lock);
> > + if (ret)
> > + goto out;
> > +
> > + iio_push_to_buffers_with_timestamp(indio_dev, &scan, iio_get_time_ns(indio_dev));
> > +out:
> > + iio_trigger_notify_done(indio_dev->trig);
> > + return IRQ_HANDLED;
> > +}
> > +
> ...

\
 
 \ /
  Last update: 2020-06-21 17:43    [W:0.077 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site