lkml.org 
[lkml]   [2020]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v1 1/3] scsi: ufs: add write booster feature support
On Wed, Apr 8, 2020 at 3:00 PM Asutosh Das <asutoshd@codeaurora.org> wrote:
>
> The write performance of TLC NAND is considerably
> lower than SLC NAND. Using SLC NAND as a WriteBooster
> Buffer enables the write request to be processed with
> lower latency and improves the overall write performance.
>
> Adds support for shared-buffer mode WriteBooster.
>
> WriteBooster enable: SW enables it when clocks are
> scaled up, thus it's enabled only in high load conditions.
>
> WriteBooster disable: SW will disable the feature,
> when clocks are scaled down. Thus writes would go as normal
> writes.

btw, in v5.8-rc1 (plus handful of remaining patches for lenovo c630
laptop (sdm850)), I'm seeing a lot of:

ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag: Sending flag query for
idn 14 failed, err = 253
ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag: Sending flag query for
idn 14 failed, err = 253
ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag_retry: query attribute,
opcode 6, idn 14, failed with error 253 after 3 retires
ufshcd-qcom 1d84000.ufshc: ufshcd_wb_ctrl write booster enable failed 253

and at least subjectively, compiling mesa seems slower, which seems
like it might be related?

not sure if that is a known issue?

BR,
-R

>
> To keep the endurance of the WriteBooster Buffer at a
> maximum, this load based toggling is adopted.
>
> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
> ---
> drivers/scsi/ufs/ufs.h | 31 +++++-
> drivers/scsi/ufs/ufshcd.c | 240 +++++++++++++++++++++++++++++++++++++++++++++-
> drivers/scsi/ufs/ufshcd.h | 21 ++++
> 3 files changed, 288 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
> index 990cb48..2c77b3e 100644
> --- a/drivers/scsi/ufs/ufs.h
> +++ b/drivers/scsi/ufs/ufs.h
> @@ -140,6 +140,9 @@ enum flag_idn {
> QUERY_FLAG_IDN_BUSY_RTC = 0x09,
> QUERY_FLAG_IDN_RESERVED3 = 0x0A,
> QUERY_FLAG_IDN_PERMANENTLY_DISABLE_FW_UPDATE = 0x0B,
> + QUERY_FLAG_IDN_WB_EN = 0x0E,
> + QUERY_FLAG_IDN_WB_BUFF_FLUSH_EN = 0x0F,
> + QUERY_FLAG_IDN_WB_BUFF_FLUSH_DURING_HIBERN8 = 0x10,
> };
>
> /* Attribute idn for Query requests */
> @@ -168,6 +171,10 @@ enum attr_idn {
> QUERY_ATTR_IDN_PSA_STATE = 0x15,
> QUERY_ATTR_IDN_PSA_DATA_SIZE = 0x16,
> QUERY_ATTR_IDN_REF_CLK_GATING_WAIT_TIME = 0x17,
> + QUERY_ATTR_IDN_WB_FLUSH_STATUS = 0x1C,
> + QUERY_ATTR_IDN_AVAIL_WB_BUFF_SIZE = 0x1D,
> + QUERY_ATTR_IDN_WB_BUFF_LIFE_TIME_EST = 0x1E,
> + QUERY_ATTR_IDN_CURR_WB_BUFF_SIZE = 0x1F,
> };
>
> /* Descriptor idn for Query requests */
> @@ -191,7 +198,7 @@ enum desc_header_offset {
> };
>
> enum ufs_desc_def_size {
> - QUERY_DESC_DEVICE_DEF_SIZE = 0x40,
> + QUERY_DESC_DEVICE_DEF_SIZE = 0x59,
> QUERY_DESC_CONFIGURATION_DEF_SIZE = 0x90,
> QUERY_DESC_UNIT_DEF_SIZE = 0x23,
> QUERY_DESC_INTERCONNECT_DEF_SIZE = 0x06,
> @@ -219,6 +226,7 @@ enum unit_desc_param {
> UNIT_DESC_PARAM_PHY_MEM_RSRC_CNT = 0x18,
> UNIT_DESC_PARAM_CTX_CAPABILITIES = 0x20,
> UNIT_DESC_PARAM_LARGE_UNIT_SIZE_M1 = 0x22,
> + UNIT_DESC_PARAM_WB_BUF_ALLOC_UNITS = 0x29,
> };
>
> /* Device descriptor parameters offsets in bytes*/
> @@ -258,6 +266,9 @@ enum device_desc_param {
> DEVICE_DESC_PARAM_PSA_MAX_DATA = 0x25,
> DEVICE_DESC_PARAM_PSA_TMT = 0x29,
> DEVICE_DESC_PARAM_PRDCT_REV = 0x2A,
> + DEVICE_DESC_PARAM_EXT_UFS_FEATURE_SUP = 0x4F,
> + DEVICE_DESC_PARAM_WB_TYPE = 0x54,
> + DEVICE_DESC_PARAM_WB_SHARED_ALLOC_UNITS = 0x55,
> };
>
> /* Interconnect descriptor parameters offsets in bytes*/
> @@ -333,6 +344,11 @@ enum {
> UFSHCD_AMP = 3,
> };
>
> +/* Possible values for dExtendedUFSFeaturesSupport */
> +enum {
> + UFS_DEV_WRITE_BOOSTER_SUP = BIT(8),
> +};
> +
> #define POWER_DESC_MAX_SIZE 0x62
> #define POWER_DESC_MAX_ACTV_ICC_LVLS 16
>
> @@ -447,6 +463,15 @@ enum ufs_dev_pwr_mode {
> UFS_POWERDOWN_PWR_MODE = 3,
> };
>
> +enum ufs_dev_wb_buf_avail_size {
> + UFS_WB_10_PERCENT_BUF_REMAIN = 0x1,
> + UFS_WB_40_PERCENT_BUF_REMAIN = 0x4,
> +};
> +
> +enum ufs_dev_wb_buf_user_cap_config {
> + UFS_WB_BUFF_PRESERVE_USER_SPACE = 1,
> + UFS_WB_BUFF_USER_SPACE_RED_EN = 2,
> +};
> /**
> * struct utp_cmd_rsp - Response UPIU structure
> * @residual_transfer_count: Residual transfer count DW-3
> @@ -537,6 +562,10 @@ struct ufs_dev_info {
> u8 *model;
> u16 wspecversion;
> u32 clk_gating_wait_us;
> + u32 d_ext_ufs_feature_sup;
> + u8 b_wb_buffer_type;
> + u32 d_wb_alloc_units;
> + bool keep_vcc_on;
> };
>
> /**
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 64e42ef..5b3a92e 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -48,6 +48,8 @@
> #include "unipro.h"
> #include "ufs-sysfs.h"
> #include "ufs_bsg.h"
> +#include <linux/blkdev.h>
> +#include <asm/unaligned.h>
>
> #define CREATE_TRACE_POINTS
> #include <trace/events/ufs.h>
> @@ -251,6 +253,13 @@ static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up);
> static irqreturn_t ufshcd_intr(int irq, void *__hba);
> static int ufshcd_change_power_mode(struct ufs_hba *hba,
> struct ufs_pa_layer_attr *pwr_mode);
> +static bool ufshcd_wb_sup(struct ufs_hba *hba);
> +static int ufshcd_wb_buf_flush_enable(struct ufs_hba *hba);
> +static int ufshcd_wb_buf_flush_disable(struct ufs_hba *hba);
> +static int ufshcd_wb_ctrl(struct ufs_hba *hba, bool enable);
> +static int ufshcd_wb_toggle_flush_during_h8(struct ufs_hba *hba, bool set);
> +static inline void ufshcd_wb_toggle_flush(struct ufs_hba *hba, bool enable);
> +
> static inline bool ufshcd_valid_tag(struct ufs_hba *hba, int tag)
> {
> return tag >= 0 && tag < hba->nutrs;
> @@ -272,6 +281,25 @@ static inline void ufshcd_disable_irq(struct ufs_hba *hba)
> }
> }
>
> +static inline void ufshcd_wb_config(struct ufs_hba *hba)
> +{
> + int ret;
> +
> + if (!ufshcd_wb_sup(hba))
> + return;
> +
> + ret = ufshcd_wb_ctrl(hba, true);
> + if (ret)
> + dev_err(hba->dev, "%s: Enable WB failed: %d\n", __func__, ret);
> + else
> + dev_info(hba->dev, "%s: Write Booster Configured\n", __func__);
> + ret = ufshcd_wb_toggle_flush_during_h8(hba, true);
> + if (ret)
> + dev_err(hba->dev, "%s: En WB flush during H8: failed: %d\n",
> + __func__, ret);
> + ufshcd_wb_toggle_flush(hba, true);
> +}
> +
> static void ufshcd_scsi_unblock_requests(struct ufs_hba *hba)
> {
> if (atomic_dec_and_test(&hba->scsi_block_reqs_cnt))
> @@ -1154,6 +1182,13 @@ static int ufshcd_devfreq_scale(struct ufs_hba *hba, bool scale_up)
> ufshcd_scale_clks(hba, false);
> }
>
> + /* Enable Write Booster if we have scaled up else disable it */
> + if (!ret) {
> + up_write(&hba->clk_scaling_lock);
> + ufshcd_wb_ctrl(hba, scale_up);
> + down_write(&hba->clk_scaling_lock);
> + }
> +
> out_unprepare:
> ufshcd_clock_scaling_unprepare(hba);
> out:
> @@ -5154,6 +5189,168 @@ static void ufshcd_bkops_exception_event_handler(struct ufs_hba *hba)
> __func__, err);
> }
>
> +static bool ufshcd_wb_sup(struct ufs_hba *hba)
> +{
> + return (ufshcd_is_wb_allowed(hba) &&
> + (hba->dev_info.d_ext_ufs_feature_sup &
> + UFS_DEV_WRITE_BOOSTER_SUP) &&
> + hba->dev_info.b_wb_buffer_type &&
> + hba->dev_info.d_wb_alloc_units);
> +}
> +
> +static int ufshcd_wb_ctrl(struct ufs_hba *hba, bool enable)
> +{
> + int ret;
> + enum query_opcode opcode;
> +
> + if (!ufshcd_wb_sup(hba))
> + return 0;
> +
> + if (!(enable ^ hba->wb_enabled))
> + return 0;
> + if (enable)
> + opcode = UPIU_QUERY_OPCODE_SET_FLAG;
> + else
> + opcode = UPIU_QUERY_OPCODE_CLEAR_FLAG;
> +
> + ret = ufshcd_query_flag_retry(hba, opcode,
> + QUERY_FLAG_IDN_WB_EN, NULL);
> + if (ret) {
> + dev_err(hba->dev, "%s write booster %s failed %d\n",
> + __func__, enable ? "enable" : "disable", ret);
> + return ret;
> + }
> +
> + hba->wb_enabled = enable;
> + dev_dbg(hba->dev, "%s write booster %s %d\n",
> + __func__, enable ? "enable" : "disable", ret);
> +
> + return ret;
> +}
> +
> +static int ufshcd_wb_toggle_flush_during_h8(struct ufs_hba *hba, bool set)
> +{
> + int val;
> +
> + if (set)
> + val = UPIU_QUERY_OPCODE_SET_FLAG;
> + else
> + val = UPIU_QUERY_OPCODE_CLEAR_FLAG;
> +
> + return ufshcd_query_flag_retry(hba, val,
> + QUERY_FLAG_IDN_WB_BUFF_FLUSH_DURING_HIBERN8,
> + NULL);
> +}
> +
> +static inline void ufshcd_wb_toggle_flush(struct ufs_hba *hba, bool enable)
> +{
> + if (enable)
> + ufshcd_wb_buf_flush_enable(hba);
> + else
> + ufshcd_wb_buf_flush_disable(hba);
> +
> +}
> +
> +static int ufshcd_wb_buf_flush_enable(struct ufs_hba *hba)
> +{
> + int ret;
> +
> + if (!ufshcd_wb_sup(hba) || hba->wb_buf_flush_enabled)
> + return 0;
> +
> + ret = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_SET_FLAG,
> + QUERY_FLAG_IDN_WB_BUFF_FLUSH_EN, NULL);
> + if (ret)
> + dev_err(hba->dev, "%s WB - buf flush enable failed %d\n",
> + __func__, ret);
> + else
> + hba->wb_buf_flush_enabled = true;
> +
> + dev_dbg(hba->dev, "WB - Flush enabled: %d\n", ret);
> + return ret;
> +}
> +
> +static int ufshcd_wb_buf_flush_disable(struct ufs_hba *hba)
> +{
> + int ret;
> +
> + if (!ufshcd_wb_sup(hba) || !hba->wb_buf_flush_enabled)
> + return 0;
> +
> + ret = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_CLEAR_FLAG,
> + QUERY_FLAG_IDN_WB_BUFF_FLUSH_EN, NULL);
> + if (ret) {
> + dev_warn(hba->dev, "%s: WB - buf flush disable failed %d\n",
> + __func__, ret);
> + } else {
> + hba->wb_buf_flush_enabled = false;
> + dev_dbg(hba->dev, "WB - Flush disabled: %d\n", ret);
> + }
> +
> + return ret;
> +}
> +
> +static bool ufshcd_wb_keep_vcc_on(struct ufs_hba *hba)
> +{
> + int ret;
> + u32 cur_buf, avail_buf;
> +
> + if (!ufshcd_wb_sup(hba))
> + return false;
> + /*
> + * The ufs device needs the vcc to be ON to flush.
> + * With user-space reduction enabled, it's enough to enable flush
> + * by checking only the available buffer. The threshold
> + * defined here is > 90% full.
> + * With user-space preserved enabled, the current-buffer
> + * should be checked too because the wb buffer size can reduce
> + * when disk tends to be full. This info is provided by current
> + * buffer (dCurrentWriteBoosterBufferSize). There's no point in
> + * keeping vcc on when current buffer is empty.
> + */
> + ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR,
> + QUERY_ATTR_IDN_AVAIL_WB_BUFF_SIZE,
> + 0, 0, &avail_buf);
> + if (ret) {
> + dev_warn(hba->dev, "%s dAvailableWriteBoosterBufferSize read failed %d\n",
> + __func__, ret);
> + return false;
> + }
> +
> + ret = ufshcd_vops_get_user_cap_mode(hba);
> + if (ret <= 0) {
> + dev_dbg(hba->dev, "Get user-cap reduction mode: failed: %d\n",
> + ret);
> + /* Most commonly used */
> + ret = UFS_WB_BUFF_PRESERVE_USER_SPACE;
> + }
> +
> + if (ret == UFS_WB_BUFF_USER_SPACE_RED_EN) {
> + if (avail_buf <= UFS_WB_10_PERCENT_BUF_REMAIN)
> + return true;
> + return false;
> + } else if (ret == UFS_WB_BUFF_PRESERVE_USER_SPACE) {
> + ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR,
> + QUERY_ATTR_IDN_CURR_WB_BUFF_SIZE,
> + 0, 0, &cur_buf);
> + if (ret) {
> + dev_err(hba->dev, "%s dCurWriteBoosterBufferSize read failed %d\n",
> + __func__, ret);
> + return false;
> + }
> +
> + if (!cur_buf) {
> + dev_info(hba->dev, "dCurWBBuf: %d WB disabled until free-space is available\n",
> + cur_buf);
> + return false;
> + }
> + /* Let it continue to flush when >60% full */
> + if (avail_buf < UFS_WB_40_PERCENT_BUF_REMAIN)
> + return true;
> + }
> + return false;
> +}
> +
> /**
> * ufshcd_exception_event_handler - handle exceptions raised by device
> * @work: pointer to work data
> @@ -6632,6 +6829,28 @@ static int ufs_get_device_desc(struct ufs_hba *hba)
> desc_buf[DEVICE_DESC_PARAM_SPEC_VER + 1];
>
> model_index = desc_buf[DEVICE_DESC_PARAM_PRDCT_NAME];
> + /* Enable WB only for UFS-3.1 */
> + if (dev_info->wspecversion >= 0x310) {
> + hba->dev_info.d_ext_ufs_feature_sup =
> + get_unaligned_be32(desc_buf +
> + DEVICE_DESC_PARAM_EXT_UFS_FEATURE_SUP);
> + /*
> + * WB may be supported but not configured while provisioning.
> + * The spec says, in dedicated wb buffer mode,
> + * a max of 1 lun would have wb buffer configured.
> + * Now only shared buffer mode is supported.
> + */
> + hba->dev_info.b_wb_buffer_type =
> + desc_buf[DEVICE_DESC_PARAM_WB_TYPE];
> +
> + if (!hba->dev_info.b_wb_buffer_type)
> + goto skip_alloc_unit;
> + hba->dev_info.d_wb_alloc_units =
> + get_unaligned_be32(desc_buf +
> + DEVICE_DESC_PARAM_WB_SHARED_ALLOC_UNITS);
> + }
> +
> +skip_alloc_unit:
> err = ufshcd_read_string_desc(hba, model_index,
> &dev_info->model, SD_ASCII_STD);
> if (err < 0) {
> @@ -7142,6 +7361,7 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool async)
> /* set the state as operational after switching to desired gear */
> hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
>
> + ufshcd_wb_config(hba);
> /* Enable Auto-Hibernate if configured */
> ufshcd_auto_hibern8_enable(hba);
>
> @@ -7802,12 +8022,16 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
> *
> * Ignore the error returned by ufshcd_toggle_vreg() as device is anyway
> * in low power state which would save some power.
> + *
> + * If Write Booster is enabled and the device needs to flush the WB
> + * buffer OR if bkops status is urgent for WB, keep Vcc on.
> */
> if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba) &&
> !hba->dev_info.is_lu_power_on_wp) {
> ufshcd_setup_vreg(hba, false);
> } else if (!ufshcd_is_ufs_dev_active(hba)) {
> - ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
> + if (!hba->dev_info.keep_vcc_on)
> + ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
> if (!ufshcd_is_link_active(hba)) {
> ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq);
> ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq2);
> @@ -7931,11 +8155,21 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> /* make sure that auto bkops is disabled */
> ufshcd_disable_auto_bkops(hba);
> }
> + /*
> + * With wb enabled, if the bkops is enabled or if the
> + * configured WB type is 70% full, keep vcc ON
> + * for the device to flush the wb buffer
> + */
> + if ((hba->auto_bkops_enabled && ufshcd_wb_sup(hba)) ||
> + ufshcd_wb_keep_vcc_on(hba))
> + hba->dev_info.keep_vcc_on = true;
> + } else if (!ufshcd_is_runtime_pm(pm_op)) {
> + hba->dev_info.keep_vcc_on = false;
> }
>
> if ((req_dev_pwr_mode != hba->curr_dev_pwr_mode) &&
> - ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
> - !ufshcd_is_runtime_pm(pm_op))) {
> + ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
> + !ufshcd_is_runtime_pm(pm_op))) {
> /* ensure that bkops is disabled */
> ufshcd_disable_auto_bkops(hba);
> ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index 6ffc08a..59d6eb6 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -344,6 +344,7 @@ struct ufs_hba_variant_ops {
> void (*config_scaling_param)(struct ufs_hba *hba,
> struct devfreq_dev_profile *profile,
> void *data);
> + u32 (*wb_get_user_cap_mode)(struct ufs_hba *hba);
> };
>
> /* clock gating state */
> @@ -555,6 +556,13 @@ enum ufshcd_caps {
> * for userspace to control the power management.
> */
> UFSHCD_CAP_RPM_AUTOSUSPEND = 1 << 6,
> +
> + /*
> + * This capability allows the host controller driver to turn-on
> + * WriteBooster, if the underlying device supports it and is
> + * provisioned to be used. This would increase the write performance.
> + */
> + UFSHCD_CAP_WB_EN = (1 << 7),
> };
>
> /**
> @@ -727,6 +735,8 @@ struct ufs_hba {
>
> struct device bsg_dev;
> struct request_queue *bsg_queue;
> + bool wb_buf_flush_enabled;
> + bool wb_enabled;
> };
>
> /* Returns true if clocks can be gated. Otherwise false */
> @@ -775,6 +785,11 @@ static inline bool ufshcd_is_auto_hibern8_enabled(struct ufs_hba *hba)
> return FIELD_GET(UFSHCI_AHIBERN8_TIMER_MASK, hba->ahit) ? true : false;
> }
>
> +static inline bool ufshcd_is_wb_allowed(struct ufs_hba *hba)
> +{
> + return hba->caps & UFSHCD_CAP_WB_EN;
> +}
> +
> #define ufshcd_writel(hba, val, reg) \
> writel((val), (hba)->mmio_base + (reg))
> #define ufshcd_readl(hba, reg) \
> @@ -1130,4 +1145,10 @@ static inline u8 ufshcd_scsi_to_upiu_lun(unsigned int scsi_lun)
> int ufshcd_dump_regs(struct ufs_hba *hba, size_t offset, size_t len,
> const char *prefix);
>
> +static inline unsigned int ufshcd_vops_get_user_cap_mode(struct ufs_hba *hba)
> +{
> + if (hba->vops && hba->vops->wb_get_user_cap_mode)
> + return hba->vops->wb_get_user_cap_mode(hba);
> + return 0;
> +}
> #endif /* End of Header */
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
>

\
 
 \ /
  Last update: 2020-06-20 23:15    [W:0.139 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site