lkml.org 
[lkml]   [2020]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5] hwmon:(adm1275) Enable adm1278 ADM1278_TEMP1_EN
From
Date
On 6/19/20 9:35 PM, Manikandan Elumalai wrote:
> The adm1278 temp attribute need it for openbmc platform .
> This feature not enabled by default, so PMON_CONFIG needs to enable it.
>
> Signed-off-by: Manikandan Elumalai <manikandan.hcl.ers.epl@gmail.com>
> ---
> --- v5 -align commit and change log.
> --- v4 -Reported-by: kernel test robot <lkp@intel.com>
> --- v3 -fix invalid signed-off.
> --- -removed checkpath warnings.
> --- -write ADM1278_TEMP1_EN and ADM1278_VOUT_EN conf in single line operation.
> --- v2 -add Signed-off-by.
> --- -removed ADM1278_TEMP1_EN check.
> ---
> ---

Not that it matters much here, but why all the "---" instead of just one,
especially after you were advised that this is not the expected format ?

Guenter

> drivers/hwmon/pmbus/adm1275.c | 12 +++++-------
> 1 file changed, 5 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
> index 5caa37fb..d4e1925 100644
> --- a/drivers/hwmon/pmbus/adm1275.c
> +++ b/drivers/hwmon/pmbus/adm1275.c
> @@ -666,11 +666,12 @@ static int adm1275_probe(struct i2c_client *client,
> tindex = 3;
>
> info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
> - PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
> + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
> + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
>
> - /* Enable VOUT if not enabled (it is disabled by default) */
> - if (!(config & ADM1278_VOUT_EN)) {
> - config |= ADM1278_VOUT_EN;
> + /* Enable VOUT & TEMP1 if not enabled (disabled by default) */
> + if ((config & (ADM1278_VOUT_EN | ADM1278_TEMP1_EN)) != (ADM1278_VOUT_EN | ADM1278_TEMP1_EN)) {
> + config |= ADM1278_VOUT_EN | ADM1278_TEMP1_EN;
> ret = i2c_smbus_write_byte_data(client,
> ADM1275_PMON_CONFIG,
> config);
> @@ -681,9 +682,6 @@ static int adm1275_probe(struct i2c_client *client,
> }
> }
>
> - if (config & ADM1278_TEMP1_EN)
> - info->func[0] |=
> - PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
> if (config & ADM1278_VIN_EN)
> info->func[0] |= PMBUS_HAVE_VIN;
> break;
>

\
 
 \ /
  Last update: 2020-06-20 07:21    [W:0.601 / U:0.592 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site