lkml.org 
[lkml]   [2020]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] soc: samsung: Add simple voltage coupler for Exynos5800
Date
Add a simple custom voltage regulator coupler for Exynos5800 SoCs, which
require coupling between "vdd_arm" and "vdd_int" regulators. This coupler
ensures that the voltage balancing for the coupled regulators is done
only when clients for the each regulator apply their constraints, so the
voltage values don't go beyond the bootloader-selected operation point
during the boot process. This also ensures proper voltage balancing if
any of the client driver is missing.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
v2:
- removed dependency on the regulator names as pointed by krzk, now it
works with all coupled regulators. So far the coupling between the
regulators on Exynos5800 based boards is defined only between
"vdd_arm" and "vdd_int" supplies.
---
arch/arm/mach-exynos/Kconfig | 1 +
drivers/soc/samsung/Kconfig | 3 +
drivers/soc/samsung/Makefile | 1 +
.../soc/samsung/exynos-regulator-coupler.c | 56 +++++++++++++++++++
4 files changed, 61 insertions(+)
create mode 100644 drivers/soc/samsung/exynos-regulator-coupler.c

diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 76838255b5fa..f185cd3d4c62 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -118,6 +118,7 @@ config SOC_EXYNOS5800
bool "Samsung EXYNOS5800"
default y
depends on SOC_EXYNOS5420
+ select EXYNOS_REGULATOR_COUPLER

config EXYNOS_MCPM
bool
diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
index c7a2003687c7..264185664594 100644
--- a/drivers/soc/samsung/Kconfig
+++ b/drivers/soc/samsung/Kconfig
@@ -37,4 +37,7 @@ config EXYNOS_PM_DOMAINS
bool "Exynos PM domains" if COMPILE_TEST
depends on PM_GENERIC_DOMAINS || COMPILE_TEST

+config EXYNOS_REGULATOR_COUPLER
+ bool "Exynos SoC Regulator Coupler" if COMPILE_TEST
+ depends on ARCH_EXYNOS || COMPILE_TEST
endif
diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile
index edd1d6ea064d..ecc3a32f6406 100644
--- a/drivers/soc/samsung/Makefile
+++ b/drivers/soc/samsung/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o
obj-$(CONFIG_EXYNOS_PMU_ARM_DRIVERS) += exynos3250-pmu.o exynos4-pmu.o \
exynos5250-pmu.o exynos5420-pmu.o
obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o
+obj-$(CONFIG_EXYNOS_REGULATOR_COUPLER) += exynos-regulator-coupler.o
diff --git a/drivers/soc/samsung/exynos-regulator-coupler.c b/drivers/soc/samsung/exynos-regulator-coupler.c
new file mode 100644
index 000000000000..370a0ce4de3a
--- /dev/null
+++ b/drivers/soc/samsung/exynos-regulator-coupler.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ * Author: Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Simple Samsung Exynos SoC voltage coupler. Ensures that all
+ * clients set their constraints before balancing the voltages.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/regulator/coupler.h>
+#include <linux/regulator/driver.h>
+
+static int exynos_coupler_balance_voltage(struct regulator_coupler *coupler,
+ struct regulator_dev *rdev,
+ suspend_state_t state)
+{
+ struct coupling_desc *c_desc = &rdev->coupling_desc;
+ int ret, cons_uV = 0, cons_max_uV = INT_MAX;
+ bool skip_coupled = false;
+
+ /* get coupled regulator constraints */
+ ret = regulator_check_consumers(c_desc->coupled_rdevs[1], &cons_uV,
+ &cons_max_uV, state);
+ if (ret < 0)
+ return ret;
+
+ /* skip adjusting coupled regulator if it has no constraints set yet */
+ if (cons_uV == 0)
+ skip_coupled = true;
+
+ return regulator_do_balance_voltage(rdev, state, skip_coupled);
+}
+
+static int exynos_coupler_attach(struct regulator_coupler *coupler,
+ struct regulator_dev *rdev)
+{
+ return 0;
+}
+
+static struct regulator_coupler exynos_coupler = {
+ .attach_regulator = exynos_coupler_attach,
+ .balance_voltage = exynos_coupler_balance_voltage,
+};
+
+static int __init exynos_coupler_init(void)
+{
+ if (!of_machine_is_compatible("samsung,exynos5800"))
+ return 0;
+
+ return regulator_coupler_register(&exynos_coupler);
+}
+arch_initcall(exynos_coupler_init);
--
2.17.1
\
 
 \ /
  Last update: 2020-06-02 15:11    [W:0.075 / U:3.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site