Messages in this thread | | | From | <> | Subject | R: [PATCH v4 08/10] PCI: qcom: Add ipq8064 rev2 variant and set tx term offset | Date | Tue, 2 Jun 2020 11:34:17 +0200 |
| |
> -----Messaggio originale----- > Da: Rob Herring <robh@kernel.org> > Inviato: lunedì 1 giugno 2020 23:09 > A: Ansuel Smith <ansuelsmth@gmail.com> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org>; Sham Muthayyan > <smuthayy@codeaurora.org>; Andy Gross <agross@kernel.org>; Bjorn > Helgaas <bhelgaas@google.com>; Mark Rutland > <mark.rutland@arm.com>; Stanimir Varbanov <svarbanov@mm-sol.com>; > Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>; Andrew Murray > <amurray@thegoodpenguin.co.uk>; Philipp Zabel > <p.zabel@pengutronix.de>; linux-arm-msm@vger.kernel.org; linux- > pci@vger.kernel.org; devicetree@vger.kernel.org; linux- > kernel@vger.kernel.org > Oggetto: Re: [PATCH v4 08/10] PCI: qcom: Add ipq8064 rev2 variant and > set tx term offset > > On Thu, May 14, 2020 at 10:07:09PM +0200, Ansuel Smith wrote: > > Add tx term offset support to pcie qcom driver need in some revision of > > the ipq806x SoC. Ipq8064 have tx term offset set to 7. Ipq8064-v2 > revision > > and ipq8065 have the tx term offset set to 0. > > Seems like this should be 2 patches or why isn't 'Ipq8064 have tx term > offset set to 7' done in the prior patch? One tweak is needed for > stable, but this isn't? >
Ok i will split this in 2 patch and set for stable the tx term patch.
> > > > Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> > > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> > > --- > > drivers/pci/controller/dwc/pcie-qcom.c | 18 ++++++++++++++++-- > > 1 file changed, 16 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c > b/drivers/pci/controller/dwc/pcie-qcom.c > > index f5398b0d270c..ab6f1bdd24c3 100644 > > --- a/drivers/pci/controller/dwc/pcie-qcom.c > > +++ b/drivers/pci/controller/dwc/pcie-qcom.c > > @@ -45,6 +45,9 @@ > > #define PCIE_CAP_CPL_TIMEOUT_DISABLE 0x10 > > > > #define PCIE20_PARF_PHY_CTRL 0x40 > > +#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK GENMASK(20, > 16) > > +#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) ((x) << 16) > > + > > #define PCIE20_PARF_PHY_REFCLK 0x4C > > #define PHY_REFCLK_SSP_EN BIT(16) > > #define PHY_REFCLK_USE_PAD BIT(12) > > @@ -363,7 +366,8 @@ static int qcom_pcie_init_2_1_0(struct > qcom_pcie *pcie) > > val &= ~BIT(0); > > writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); > > > > - if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) { > > + if (of_device_is_compatible(node, "qcom,pcie-ipq8064") | > > + of_device_is_compatible(node, "qcom,pcie-ipq8064-v2")) { > > writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) | > > PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(24) | > > PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(34), > > @@ -374,9 +378,18 @@ static int qcom_pcie_init_2_1_0(struct > qcom_pcie *pcie) > > writel(PHY_RX0_EQ(4), pcie->parf + > PCIE20_PARF_CONFIG_BITS); > > } > > > > + if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) { > > + /* set TX termination offset */ > > + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); > > + val &= ~PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK; > > + val |= PHY_CTRL_PHY_TX0_TERM_OFFSET(7); > > + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); > > + } > > + > > /* enable external reference clock */ > > val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK); > > - val |= BIT(16); > > + val &= ~PHY_REFCLK_USE_PAD; > > + val |= PHY_REFCLK_SSP_EN; > > writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK); > > > > /* wait for clock acquisition */ > > @@ -1452,6 +1465,7 @@ static int qcom_pcie_probe(struct > platform_device *pdev) > > static const struct of_device_id qcom_pcie_match[] = { > > { .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 }, > > { .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 }, > > + { .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 }, > > { .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 }, > > { .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 }, > > { .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 }, > > -- > > 2.25.1 > >
| |