lkml.org 
[lkml]   [2020]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: tegra124-jetson-tk1: sata doesnt work since 5.2
On Mon, Jun 01, 2020 at 05:30:37PM +0300, Dmitry Osipenko wrote:
> 31.05.2020 22:31, LABBE Corentin пишет:
> > On Thu, Mar 19, 2020 at 08:44:01AM +0100, LABBE Corentin wrote:
> >> Hello
> >>
> >> sata doesnt work on tegra124-jetson-tk1 on next and master and at least since 5.2 (but 5.1 works).
> >> [ 0.492810] +5V_SATA: supplied by +5V_SYS
> >> [ 0.493230] +12V_SATA: supplied by +VDD_MUX
> >> [ 2.088675] tegra-ahci 70027000.sata: 70027000.sata supply ahci not found, using dummy regulator
> >> [ 2.097643] tegra-ahci 70027000.sata: 70027000.sata supply phy not found, using dummy regulator
> >> [ 3.314776] tegra-ahci 70027000.sata: 70027000.sata supply ahci not found, using dummy regulator
> >> [ 3.323658] tegra-ahci 70027000.sata: 70027000.sata supply phy not found, using dummy regulator
> >> [ 5.236964] tegra-ahci 70027000.sata: 70027000.sata supply ahci not found, using dummy regulator
> >> [ 5.245867] tegra-ahci 70027000.sata: 70027000.sata supply phy not found, using dummy regulator
> >> [ 5.254706] tegra-ahci 70027000.sata: 70027000.sata supply target not found, using dummy regulator
> >> [ 5.310270] phy phy-sata.6: phy poweron failed --> -110
> >> [ 5.315604] tegra-ahci 70027000.sata: failed to power on AHCI controller: -110
> >> [ 5.323022] tegra-ahci: probe of 70027000.sata failed with error -110
> >> [ 35.694269] +5V_SATA: disabling
> >> [ 35.697438] +12V_SATA: disabling
> >>
> >> I have bisected this problem:
> >> git bisect start
> >> # bad: [22c58fd70ca48a29505922b1563826593b08cc00] Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
> >> git bisect bad 22c58fd70ca48a29505922b1563826593b08cc00
> >> # good: [67e38f578aaebf34fc1278bbe45a78ee8c73dd33] ARM: ep93xx: move pinctrl interfaces into include/linux/soc
> >> git bisect good 67e38f578aaebf34fc1278bbe45a78ee8c73dd33
> >> # good: [80f232121b69cc69a31ccb2b38c1665d770b0710] Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
> >> git bisect good 80f232121b69cc69a31ccb2b38c1665d770b0710
> >> # good: [e57ccca1ba33e1d92cc3bbf8b6304a46948844b0] Merge tag 'sound-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
> >> git bisect good e57ccca1ba33e1d92cc3bbf8b6304a46948844b0
> >> # bad: [983dfa4b6ee556563f7963348e4e2f97fc8a15b8] Merge tag 'for-linus-5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/rw/uml
> >> git bisect bad 983dfa4b6ee556563f7963348e4e2f97fc8a15b8
> >> # good: [8e4ff713ce313dcabbb60e6ede1ffc193e67631f] Merge tag 'rtc-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
> >> git bisect good 8e4ff713ce313dcabbb60e6ede1ffc193e67631f
> >> # bad: [b970afcfcabd63cd3832e95db096439c177c3592] Merge tag 'powerpc-5.2-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
> >> git bisect bad b970afcfcabd63cd3832e95db096439c177c3592
> >> # bad: [601e6bcc4ef02bda2831d5ac8133947b5edf597b] Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
> >> git bisect bad 601e6bcc4ef02bda2831d5ac8133947b5edf597b
> >> # good: [7e9c62bdb41af76974d594da89854a6aba645e58] Merge branches 'clk-sa', 'clk-aspeed', 'clk-samsung', 'clk-ingenic' and 'clk-zynq' into clk-next
> >> git bisect good 7e9c62bdb41af76974d594da89854a6aba645e58
> >> # bad: [0caf000817353cfc5db22363ecdac63b83d3a3f9] Merge branch 'clk-ti' into clk-next
> >> git bisect bad 0caf000817353cfc5db22363ecdac63b83d3a3f9
> >> # good: [5816b74581b45cf086a84ab14e13354a65e8e22c] Merge branches 'clk-hisi', 'clk-lochnagar', 'clk-allwinner', 'clk-rockchip' and 'clk-qoriq' into clk-next
> >> git bisect good 5816b74581b45cf086a84ab14e13354a65e8e22c
> >> # good: [7b4c162e03d47e037f8ee773c3e300eefb599a83] clk: at91: Mark struct clk_range as const
> >> git bisect good 7b4c162e03d47e037f8ee773c3e300eefb599a83
> >> # bad: [e71f4d385878671991e200083c7d30eb4ca8e99a] clk: tegra: divider: Mark Memory Controller clock as read-only
> >> git bisect bad e71f4d385878671991e200083c7d30eb4ca8e99a
> >> # bad: [924ee3d551c9deb16090230b824988bd37e72aa8] clk: tegra: emc: Don't enable EMC clock manually
> >> git bisect bad 924ee3d551c9deb16090230b824988bd37e72aa8
> >> # bad: [40db569d6769ffa3864fd1b89616b1a7323568a8] clk: tegra: Fix PLLM programming on Tegra124+ when PMC overrides divider
> >> git bisect bad 40db569d6769ffa3864fd1b89616b1a7323568a8
> >> # bad: [bff1cef5f23afbe49f5ebd766980dc612f5e9d0a] clk: tegra: Don't enable already enabled PLLs
> >> git bisect bad bff1cef5f23afbe49f5ebd766980dc612f5e9d0a
> >> # first bad commit: [bff1cef5f23afbe49f5ebd766980dc612f5e9d0a] clk: tegra: Don't enable already enabled PLLs
> >>
> >
> > Hello
> >
> > I have digged a bit more and with the following "patch" I have now access to sata again
> > diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
> > index 0b212cf2e794..b4e2020051d5 100644
> > --- a/drivers/clk/tegra/clk-pll.c
> > +++ b/drivers/clk/tegra/clk-pll.c
> > @@ -1602,7 +1603,7 @@ static int clk_plle_tegra114_enable(struct clk_hw *hw)
> > unsigned long input_rate;
> >
> > if (clk_pll_is_enabled(hw))
> > - return 0;
> > + pr_info("%s %s\n", __func__, clk_hw_get_name(&pll->hw));
> >
> > input_rate = clk_hw_get_rate(clk_hw_get_parent(hw));
> >
> > This patch lead to a probed ahci, and I can see "clk_plle_tegra114_enable pll_e" in messages.
> >
> > So the bad part of bff1cef5f23afbe49f5ebd766980dc612f5e9d0a is found.
>
> Hello Labbe,
>
> Looks like indeed this PLLE change should be reverted. I see that the
> code disables PLLE before changing its configuration, so apparently the
> enable-check shouldn't be needed.
>
> > As additional information, my previous kernel has CONFIG_PHY_TEGRA_XUSB=m (since firmware is on rootfs which is on sata)
> > but with this sata fail the same, having CONFIG_PHY_TEGRA_XUSB=y (and so xusb firmware in kernel) seems "necessary" for having SATA working.
>
> Sounds like PLLE needs to be enabled for SATA, but ahci-tegra driver
> doesn't do that.
>
> Could you please try this change:
>
> --- >8 ---
> diff --git a/drivers/clk/tegra/clk-tegra124.c
> b/drivers/clk/tegra/clk-tegra124.c
> index e931319dcc9d..7dbc14652830 100644
> --- a/drivers/clk/tegra/clk-tegra124.c
> +++ b/drivers/clk/tegra/clk-tegra124.c
> @@ -1330,6 +1330,7 @@ static struct tegra_clk_init_table
> common_init_table[] __initdata = {
> { TEGRA124_CLK_I2S3_SYNC, TEGRA124_CLK_CLK_MAX, 24576000, 0 },
> { TEGRA124_CLK_I2S4_SYNC, TEGRA124_CLK_CLK_MAX, 24576000, 0 },
> { TEGRA124_CLK_VIMCLK_SYNC, TEGRA124_CLK_CLK_MAX, 24576000, 0 },
> + { TEGRA124_CLK_PLL_E, TEGRA124_CLK_CLK_MAX, 0, 1 },
> /* must be the last entry */
> { TEGRA124_CLK_CLK_MAX, TEGRA124_CLK_CLK_MAX, 0, 0 },
> };
> --- >8 ---

This patch alone does not fix the issue.

\
 
 \ /
  Last update: 2020-06-02 10:20    [W:0.110 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site