lkml.org 
[lkml]   [2020]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] driver core: platform: expose numa_node to users in sysfs
Date
> >
> > On Tue, Jun 02, 2020 at 05:09:57AM +0000, Song Bao Hua (Barry Song)
> wrote:
> > > > >
> > > > > Platform devices are NUMA? That's crazy, and feels like a total
> > > > > abuse of platform devices and drivers that really should belong
> > > > > on a
> > "real"
> > > > > bus.
> > > >
> > > > I am not sure if it is an abuse of platform device. But smmu is a
> > > > platform device, drivers/iommu/arm-smmu-v3.c is a platform driver.
> > > > In a typical ARM server, there are maybe multiple SMMU devices
> > > > which can support IO virtual address and page tables for other
> > > > devices on PCI-like busses.
> > > > Each different SMMU device might be close to different NUMA node.
> > > > There is really a hardware topology.
> > > >
> > > > If you have multiple CPU packages in a NUMA server, some platform
> > > > devices might Belong to CPU0, some other might belong to CPU1.
> > >
> > > Those devices are populated by acpi_iort for an ARM server:
> > >
> > > drivers/acpi/arm64/iort.c:
> > >
> > > static const struct iort_dev_config iort_arm_smmu_v3_cfg __initconst = {
> > > .name = "arm-smmu-v3",
> > > .dev_dma_configure = arm_smmu_v3_dma_configure,
> > > .dev_count_resources = arm_smmu_v3_count_resources,
> > > .dev_init_resources = arm_smmu_v3_init_resources,
> > > .dev_set_proximity = arm_smmu_v3_set_proximity, };
> > >
> > > void __init acpi_iort_init(void)
> > > {
> > > acpi_status status;
> > >
> > > status = acpi_get_table(ACPI_SIG_IORT, 0, &iort_table);
> > > ...
> > > iort_check_id_count_workaround(iort_table);
> > > iort_init_platform_devices(); }
> > >
> > > static void __init iort_init_platform_devices(void) {
> > > ...
> > >
> > > for (i = 0; i < iort->node_count; i++) {
> > > if (iort_node >= iort_end) {
> > > pr_err("iort node pointer overflows, bad
> > table\n");
> > > return;
> > > }
> > >
> > > iort_enable_acs(iort_node);
> > >
> > > ops = iort_get_dev_cfg(iort_node);
> > > if (ops) {
> > > fwnode = acpi_alloc_fwnode_static();
> > > if (!fwnode)
> > > return;
> > >
> > > iort_set_fwnode(iort_node, fwnode);
> > >
> > > ret = iort_add_platform_device(iort_node,
> ops);
> > > if (ret) {
> > > iort_delete_fwnode(iort_node);
> > > acpi_free_fwnode_static(fwnode);
> > > return;
> > > }
> > > }
> > >
> > > ...
> > > }
> > > ...
> > > }
> > >
> > > NUMA node is got from ACPI:
> > >
> > > static int __init arm_smmu_v3_set_proximity(struct device *dev,
> > > struct
> acpi_iort_node
> > > *node) {
> > > struct acpi_iort_smmu_v3 *smmu;
> > >
> > > smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
> > > if (smmu->flags & ACPI_IORT_SMMU_V3_PXM_VALID) {
> > > int dev_node = acpi_map_pxm_to_node(smmu->pxm);
> > >
> > > ...
> > >
> > > set_dev_node(dev, dev_node);
> > > ...
> > > }
> > > return 0;
> > > }
> > >
> > > Barry
> >
> > That's fine, but those are "real" devices, not platform devices, right?
> >
>
> Most platform devices are "real" memory-mapped hardware devices. For an
> embedded system, almost all "simple-bus"
> devices are populated from device trees as platform devices. Only a part of
> platform devices are not "real" hardware.
>
> Smmu is a memory-mapped device. It is totally like most other platform
> devices populated in a memory space mapped in cpu's local space. It uses
> ioremap to map registers, use readl/writel to read/write its space.
>
> > What platform device has this issue? What one will show up this way
> > with the new patch?

Meanwhile, this patch also only shows numa_node for those platform devices with "real"
hardware and acpi support. For those platform devices which are not "real", numa_node
sys entry will not be created as dev_to_node(dev) == NUMA_NO_NODE.

For instances,
smmu is a platform device with "real" hardware backend, it gets a numa_node like:

root@ubuntu:/sys/bus/platform/devices/arm-smmu-v3.0.auto# cat numa_node
0

root@ubuntu:/sys/bus/platform/devices/arm-smmu-v3.7.auto# cat numa_node
2

snd-soc-dummy is a platform device without "real" hardware, then it gets no numa_node:

root@ubuntu:/sys/bus/platform/devices/snd-soc-dummy# ls
driver driver_override modalias power subsystem uevent

-barry

>
> if platform device shouldn't be a real hardware, there is no platform device
> with a hardware topology.
> But platform devices are "real" hardware at most time. Smmu is a "real" device,
> but it is a platform device in Linux.
>
> >
> > thanks,
> >
> > greg k-h
>
> -barry

\
 
 \ /
  Last update: 2020-06-02 09:03    [W:0.035 / U:1.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site