lkml.org 
[lkml]   [2020]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.9 112/128] b43_legacy: Fix connection problem with WPA3
Date
From: Larry Finger <Larry.Finger@lwfinger.net>

commit 6a29d134c04a8acebb7a95251acea7ad7abba106 upstream.

Since the driver was first introduced into the kernel, it has only
handled the ciphers associated with WEP, WPA, and WPA2. It fails with
WPA3 even though mac80211 can handle those additional ciphers in software,
b43legacy did not report that it could handle them. By setting MFP_CAPABLE using
ieee80211_set_hw(), the problem is fixed.

With this change, b43legacy will handle the ciphers it knows in hardware,
and let mac80211 handle the others in software. It is not necessary to
use the module parameter NOHWCRYPT to turn hardware encryption off.
Although this change essentially eliminates that module parameter,
I am choosing to keep it for cases where the hardware is broken,
and software encryption is required for all ciphers.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200526155909.5807-3-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/net/wireless/broadcom/b43legacy/main.c | 1 +
1 file changed, 1 insertion(+)

--- a/drivers/net/wireless/broadcom/b43legacy/main.c
+++ b/drivers/net/wireless/broadcom/b43legacy/main.c
@@ -3835,6 +3835,7 @@ static int b43legacy_wireless_init(struc
/* fill hw info */
ieee80211_hw_set(hw, RX_INCLUDES_FCS);
ieee80211_hw_set(hw, SIGNAL_DBM);
+ ieee80211_hw_set(hw, MFP_CAPABLE); /* Allow WPA3 in software */

hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_AP) |

\
 
 \ /
  Last update: 2020-06-19 16:45    [W:0.383 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site