lkml.org 
[lkml]   [2020]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/4] v4l2-ctrl: Add control for intra only decode
From
Date
Le mardi 16 juin 2020 à 15:30 +0300, Stanimir Varbanov a écrit :
> This adds a new decoder control to instruct the decoders to
> produce on its output intra frames only. Usually in this mode
> decoders might lower the count of output decoder buffers and
> hence reduce memory usage.

Perhaps I missed some discussion, would be nice if you could remind the
rationale from going away from a SKIP_MODE menu to adding dedicated boolean
control for each mode.

>
> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
> ---
> .../userspace-api/media/v4l/ext-ctrls-codec.rst | 9 +++++++++
> drivers/media/v4l2-core/v4l2-ctrls.c | 2 ++
> include/uapi/linux/v4l2-controls.h | 1 +
> 3 files changed, 12 insertions(+)
>
> diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> index b9d3f7ae6486..d7f34596f95b 100644
> --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> @@ -652,6 +652,15 @@ enum v4l2_mpeg_video_bitrate_mode -
> otherwise the decoder expects a single frame in per buffer.
> Applicable to the decoder, all codecs.
>
> +``V4L2_CID_MPEG_VIDEO_DECODE_INTRA_FRAMES_ONLY (boolean)``
> + If enabled the decoder should start decoding only intra frames. The
> + decoder consume first input buffer for progressive stream (or first
> + two buffers for interlace). Decoder might not allocate more output
> + buffers than it is required to consume one input frame. Usually the
> + decoder input buffers will contain only intra frames but it is not
> + mandatory. This control could be used for thumbnails generation.
> + Applicable to the decoder, all codecs.

This imply that number of allocated buffers might be smaller (no references
buffer are needed), but I think it should actually be more explicit that this
must be set prior to reading MIN_BUFFER* and/or allocating buffers (since it's
userspace that allocates buffers).

What if a HW support live switching of this mode on key frames ? And if so, how
do we configure and control that ?

> +
> ``V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE (boolean)``
> Enable writing sample aspect ratio in the Video Usability
> Information. Applicable to the H264 encoder.
> diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-
> core/v4l2-ctrls.c
> index bc00d02e411f..2b1fb8dcd360 100644
> --- a/drivers/media/v4l2-core/v4l2-ctrls.c
> +++ b/drivers/media/v4l2-core/v4l2-ctrls.c
> @@ -846,6 +846,7 @@ const char *v4l2_ctrl_get_name(u32 id)
> case V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE: return "H264
> MB Level Rate Control";
> case V4L2_CID_MPEG_VIDEO_HEADER_MODE: return
> "Sequence Header Mode";
> case V4L2_CID_MPEG_VIDEO_MAX_REF_PIC: return "Max
> Number of Reference Pics";
> + case V4L2_CID_MPEG_VIDEO_DECODE_INTRA_FRAMES_ONLY: return "Decode
> intra frames only";
> case V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP: return "H263 I-Frame
> QP Value";
> case V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP: return "H263 P-Frame
> QP Value";
> case V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP: return "H263 B-Frame
> QP Value";
> @@ -1197,6 +1198,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum
> v4l2_ctrl_type *type,
> case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE:
> case V4L2_CID_MPEG_VIDEO_MPEG4_QPEL:
> case V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER:
> + case V4L2_CID_MPEG_VIDEO_DECODE_INTRA_FRAMES_ONLY:
> case V4L2_CID_WIDE_DYNAMIC_RANGE:
> case V4L2_CID_IMAGE_STABILIZATION:
> case V4L2_CID_RDS_RECEPTION:
> diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-
> controls.h
> index 0f7e4388dcce..c64471e64aa7 100644
> --- a/include/uapi/linux/v4l2-controls.h
> +++ b/include/uapi/linux/v4l2-controls.h
> @@ -744,6 +744,7 @@ enum v4l2_cid_mpeg_video_hevc_size_of_length_field {
> #define V4L2_CID_MPEG_VIDEO_REF_NUMBER_FOR_PFRAMES (V4L2_CID_MPEG_BASE +
> 643)
> #define V4L2_CID_MPEG_VIDEO_PREPEND_SPSPPS_TO_IDR (V4L2_CID_MPEG_BASE +
> 644)
> #define V4L2_CID_MPEG_VIDEO_CONSTANT_QUALITY (V4L2_CID_MPEG_BASE +
> 645)
> +#define V4L2_CID_MPEG_VIDEO_DECODE_INTRA_FRAMES_ONLY (V4L2_CID_MPEG_BASE +
> 646)
>
> /* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2
> */
> #define V4L2_CID_MPEG_CX2341X_BASE (V4L2_CTRL_CLASS
> _MPEG | 0x1000)

\
 
 \ /
  Last update: 2020-06-19 14:39    [W:0.058 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site