lkml.org 
[lkml]   [2020]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH net-next v3 7/8] dt-bindings: net: phy: vsc8531: document the load/save GPIO
    Date
    A new optional property can be used to reference the load/save GPIO,
    used for PTP hardware clock (PHC) operations. This patch documents it in
    the binding documentation.

    Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
    ---
    Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt | 3 +++
    1 file changed, 3 insertions(+)

    diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
    index 5ff37c68c941..87a27d775d48 100644
    --- a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
    +++ b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
    @@ -31,6 +31,8 @@ Optional properties:
    VSC8531_LINK_100_ACTIVITY (2),
    VSC8531_LINK_ACTIVITY (0) and
    VSC8531_DUPLEX_COLLISION (8).
    +- load-save-gpios : GPIO used for the load/save operation of the PTP
    + hardware clock (PHC).


    Table: 1 - Edge rate change
    @@ -67,4 +69,5 @@ Example:
    vsc8531,edge-slowdown = <7>;
    vsc8531,led-0-mode = <LINK_1000_ACTIVITY>;
    vsc8531,led-1-mode = <LINK_100_ACTIVITY>;
    + load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
    };
    --
    2.26.2
    \
     
     \ /
      Last update: 2020-06-19 14:29    [W:2.165 / U:0.608 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site