lkml.org 
[lkml]   [2020]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 9/9] arm64: dts: renesas: salvator: add a connection from adv748x codec (HDMI input) to the R-Car SoC
Kieran Bingham, Thu, Jun 18, 2020 18:32:55 +0200:
> On 02/04/2020 19:35, Alex Riesen wrote:
> > --- a/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts
> > +++ b/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts
> > @@ -146,7 +146,8 @@ &sata {
> > &sound_card {
> > dais = <&rsnd_port0 /* ak4613 */
> > &rsnd_port1 /* HDMI0 */
> > - &rsnd_port2>; /* HDMI1 */
> > + &rsnd_port2 /* HDMI1 */
> > + &rsnd_port3>; /* adv7482 hdmi-in */
>
> Ah - that was confusing at first... but HDMI0 and HDMI1 are *outputs*,
> where of course the adv7482 is an input ;-)

And ak4613 is both... Why? Are the "dais" of a sound_card more commonly
outputs than inputs?

> Otherwise, I can't spot anything else yet so:
>
> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
>
> But I fear there may have been some churn around here, so it would be
> good to see a rebase too.

Just rebased the series on top of linux-media/master and the only conflict was
in adding ssi4 node to rcar_sound,ssi in r8a77961.dtsi, as there was an
addition of ssi2 in the same line.

Thanks,
Alex

\
 
 \ /
  Last update: 2020-06-19 11:35    [W:0.071 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site