lkml.org 
[lkml]   [2020]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] hwmon:(adm1275) Enable adm1278 ADM1278_TEMP1_EN
On Fri, Jun 19, 2020 at 08:18:53PM +0530, Manikandan Elumalai wrote:
> The adm1278 temp attribute need it for openbmc platform .
> This feature not enabled by default, so PMON_CONFIG needs to enable it.
>
> v4:
> ---
> Reported-by: kernel test robot <lkp@intel.com>
> v3:
> ----
> fix invalid signed-off.
> removed checkpath warnings.
> write ADM1278_TEMP1_EN and ADM1278_VOUT_EN conf in single line operation.
> v2:
> ----
> add Signed-off-by.
> removed ADM1278_TEMP1_EN check.
>
> Signed-off-by: Manikandan Elumalai <manikandan.hcl.ers.epl@gmail.com>

The problem is that this is after '---', meaning it is considered a comment.
The Signed-off-by: tag needs to be located before the first '---'.
The change log should not be part of the commit log and follow '---'.

Guenter

> ---
> drivers/hwmon/pmbus/adm1275.c | 12 +++++-------
> 1 file changed, 5 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
> index 5caa37fb..d4e1925 100644
> --- a/drivers/hwmon/pmbus/adm1275.c
> +++ b/drivers/hwmon/pmbus/adm1275.c
> @@ -666,11 +666,12 @@ static int adm1275_probe(struct i2c_client *client,
> tindex = 3;
>
> info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
> - PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
> + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
> + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
>
> - /* Enable VOUT if not enabled (it is disabled by default) */
> - if (!(config & ADM1278_VOUT_EN)) {
> - config |= ADM1278_VOUT_EN;
> + /* Enable VOUT & TEMP1 if not enabled (disabled by default) */
> + if ((config & (ADM1278_VOUT_EN | ADM1278_TEMP1_EN)) != (ADM1278_VOUT_EN | ADM1278_TEMP1_EN)) {
> + config |= ADM1278_VOUT_EN | ADM1278_TEMP1_EN;
> ret = i2c_smbus_write_byte_data(client,
> ADM1275_PMON_CONFIG,
> config);
> @@ -681,9 +682,6 @@ static int adm1275_probe(struct i2c_client *client,
> }
> }
>
> - if (config & ADM1278_TEMP1_EN)
> - info->func[0] |=
> - PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
> if (config & ADM1278_VIN_EN)
> info->func[0] |= PMBUS_HAVE_VIN;
> break;
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2020-06-19 17:39    [W:0.039 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site