lkml.org 
[lkml]   [2020]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dt-bindings: chrome: Add cros-ec-typec mux props
Hi Heikki and Rob,

(trimming text):
On Mon, Jun 15, 2020 at 04:22:07PM +0300, Heikki Krogerus wrote:
> On Fri, Jun 12, 2020 at 10:34:06AM -0700, Prashant Malani wrote:
> > Hi Rob,
> > > Yes, but let's stop calling it a mux. It's a "USB Type C signal routing blob".
> >
> > Ack.
> >
> > Let's go with "-switch" ? That's what the connector class uses and it
> > conveys the meaning (unless that is a reserved keyword in DT).
>
> Just as a clarification here, we should not be even talking about
> signal routing here. We are talking about functions that an external
> components perform from the connector's perspective. It depends on the
> platform does that function require changing the routing of the lines
> from the connector. For example, data role swapping does not require
> muxing on platforms that have single dual-role USB controller, but
> platforms that have separate IPs for the USB host and USB device
> controllers will need a mux.
>
> Note, that it is even possible that switching from USB to DisplayPort
> mode does not require any pin reconfiguration from the mux, even if
> the platform has one, because the PHY can be shared between USB3 and
> DP. Then the PHY just needs to be told that it is now in DP mode when
> DP alt mode is entered instead of the mux.
>
> > > > Would this block the addition of the "*-switch" properties? IIUC the
> > > > two are related but not dependent on each other.
> > > >
> > > > The *-switch properties are phandles which the Type C connector class
> > > > framework expects (and uses to get handles to those switches).
> > > > These would point to the "mux" or "group of mux" abstractions as noted earlier.
> > >
> > > You don't need them though. Walk the graph. You get the connector
> > > port@1 remote endpoint and then get its parent.
> > >
> >
> > I see; would it be something along the lines of this? (DT example
> > follows; search for "example_end" to jump to bottom):
>
> I just realized that you have in practice placed the mux-agent into
> the graph below, right? That we can not do, because it is not
> physically connected to the connector.

Is this a requirement? I read through the graph.txt file [1] and I couldn't
find anything stating that a physical connection between two devices was
required (but I may be misinterpreting that document)

[1]:
https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bindings/graph.txt

>
> > <example_start>
> >
> > <example_end>
> >
> > Would this be conformant to OF graph and usb-connector bindings
> > requirements? We'll certainly send out a format PATCH/RFC series for
> > this, but I was hoping to gauge whether we're thinking along the right lines.
> >
> > So, in effect this would mean:
> > - New bindings(and compatible strings) to be added for:
> > typec-{orientation,data-role,mode}-switch.
> > - Handling in Type C connector class to parse switches from OF graph.
> > - Handling in Type C connector class for distinct switches for port@1
> > (SS lines) and port@2 (SBU lines).
> >
> > The only thing I'm confused about is how we can define these switch
> > remote-endpoint bindings in usb-connector.yaml; the port can have an
> > remote-endpoint, but can we specify what the parent of the remote-endpoint
> > should have as a compatible string? Or do we not need to?
>
> thanks,
>
> --
> heikki

Best regards,

-Prashant

\
 
 \ /
  Last update: 2020-06-18 21:00    [W:1.373 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site