lkml.org 
[lkml]   [2020]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] ARM: dts: at91: sama5d2_xplained: Remove pdmic node
Date
The PDMIC needs PDM microphones to work. sama5d2 xplained doesn't have
such microphones, so there is no reason to enable PDMIC and take the
pins since there is no-one using them.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---

Changes in v2:
- rebased on top of at91-dt;
- added more details in the commit description;
- changed subject from:
"[PATCH 3/3] Revert "ARM: at91/dt: sama5d2 Xplained: add pdmic node""
to
"[PATCH v2] ARM: dts: at91: sama5d2_xplained: Remove pdmic node"


arch/arm/boot/dts/at91-sama5d2_xplained.dts | 16 ----------------
1 file changed, 16 deletions(-)

diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 0e17df568d0b..058fae1b4a76 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -168,16 +168,6 @@ timer1: timer@1 {
};
};

- pdmic@f8018000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pdmic_default>;
- atmel,model = "PDMIC @ sama5d2_xplained";
- atmel,mic-min-freq = <1000000>;
- atmel,mic-max-freq = <3246000>;
- atmel,mic-offset = <0x0>;
- status = "okay";
- };
-
uart1: serial@f8020000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_default>;
@@ -599,12 +589,6 @@ pinctrl_macb0_phy_irq: macb0_phy_irq {
bias-disable;
};

- pinctrl_pdmic_default: pdmic_default {
- pinmux = <PIN_PB26__PDMIC_DAT>,
- <PIN_PB27__PDMIC_CLK>;
- bias-disable;
- };
-
pinctrl_qspi0_default: qspi0_default {
sck_cs {
pinmux = <PIN_PA22__QSPI0_SCK>,
--
2.25.1
\
 
 \ /
  Last update: 2020-06-18 17:29    [W:0.039 / U:1.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site