lkml.org 
[lkml]   [2020]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [Tee-dev] [PATCHv8 1/3] optee: use uuid for sysfs driver entry
Hi Jerome,

On Wed, 17 Jun 2020 at 20:46, Jerome Forissier <jerome@forissier.org> wrote:
>
>
>
> On 6/17/20 3:58 PM, Sumit Garg wrote:
> > Hi Maxim,
> >
> > On Thu, 4 Jun 2020 at 23:28, Maxim Uvarov <maxim.uvarov@linaro.org> wrote:
> >>
> >> With the evolving use-cases for TEE bus, now it's required to support
> >> multi-stage enumeration process. But using a simple index doesn't
> >> suffice this requirement and instead leads to duplicate sysfs entries.
> >> So instead switch to use more informative device UUID for sysfs entry
> >> like:
> >> /sys/bus/tee/devices/optee-ta-<uuid>
> >>
> >> Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
> >> Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
> >> ---
> >> Documentation/ABI/testing/sysfs-bus-optee-devices | 8 ++++++++
> >> MAINTAINERS | 1 +
> >> drivers/tee/optee/device.c | 9 ++++++---
> >> 3 files changed, 15 insertions(+), 3 deletions(-)
> >> create mode 100644 Documentation/ABI/testing/sysfs-bus-optee-devices
> >>
> >> diff --git a/Documentation/ABI/testing/sysfs-bus-optee-devices b/Documentation/ABI/testing/sysfs-bus-optee-devices
> >> new file mode 100644
> >> index 000000000000..0ae04ae5374a
> >> --- /dev/null
> >> +++ b/Documentation/ABI/testing/sysfs-bus-optee-devices
> >> @@ -0,0 +1,8 @@
> >> +What: /sys/bus/tee/devices/optee-ta-<uuid>/
> >> +Date: May 2020
> >> +KernelVersion 5.7
> >> +Contact: tee-dev@lists.linaro.org
> >> +Description:
> >> + OP-TEE bus provides reference to registered drivers under this directory. The <uuid>
> >> + matches Trusted Application (TA) driver and corresponding TA in secure OS. Drivers
> >> + are free to create needed API under optee-ta-<uuid> directory.
> >> diff --git a/MAINTAINERS b/MAINTAINERS
> >> index ecc0749810b0..6717afef2de3 100644
> >> --- a/MAINTAINERS
> >> +++ b/MAINTAINERS
> >> @@ -12516,6 +12516,7 @@ OP-TEE DRIVER
> >> M: Jens Wiklander <jens.wiklander@linaro.org>
> >> L: tee-dev@lists.linaro.org
> >> S: Maintained
> >> +F: Documentation/ABI/testing/sysfs-bus-optee-devices
> >> F: drivers/tee/optee/
> >>
> >> OP-TEE RANDOM NUMBER GENERATOR (RNG) DRIVER
> >> diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c
> >> index e3a148521ec1..23d264c8146e 100644
> >> --- a/drivers/tee/optee/device.c
> >> +++ b/drivers/tee/optee/device.c
> >> @@ -65,7 +65,7 @@ static int get_devices(struct tee_context *ctx, u32 session,
> >> return 0;
> >> }
> >>
> >> -static int optee_register_device(const uuid_t *device_uuid, u32 device_id)
> >> +static int optee_register_device(const uuid_t *device_uuid)
> >> {
> >> struct tee_client_device *optee_device = NULL;
> >> int rc;
> >> @@ -75,7 +75,10 @@ static int optee_register_device(const uuid_t *device_uuid, u32 device_id)
> >> return -ENOMEM;
> >>
> >> optee_device->dev.bus = &tee_bus_type;
> >> - dev_set_name(&optee_device->dev, "optee-clnt%u", device_id);
> >> + if (dev_set_name(&optee_device->dev, "optee-ta-%pUl", device_uuid)) {
> >
> > You should be using format specifier as: "%pUb" instead of "%pUl" as
> > UUID representation for TAs is in big endian format. See below:
>
> Where does device_uuid come from? If it comes directly from OP-TEE, then
> it should be a pointer to the following struct:
>
> typedef struct
> {
> uint32_t timeLow;
> uint16_t timeMid;
> uint16_t timeHiAndVersion;
> uint8_t clockSeqAndNode[8];
> } TEE_UUID;
>
> (GlobalPlatform TEE Internal Core API spec v1.2.1 section 3.2.4)
>
> - The spec does not mandate any particular endianness and simply warns
> about possible issues if secure and non-secure worlds differ in endianness.
> - OP-TEE uses %pUl assuming that host order is little endian (that is
> true for the Arm platforms that run OP-TEE currently). By the same logic
> %pUl should be fine in the kernel.
> - On the other hand, the UUID in a Trusted App header is always encoded
> big endian by the Python script that signs and optionally encrypts the
> TA. This should not have any visible impact on UUIDs exchanged between
> the secure and non-secure world though.
>
> So I am wondering why you had to use %pUb. There must be some
> inconsistency somewhere :-/

Yes there is. Linux stores UUID in big endian format (16 byte octets)
and OP-TEE stores UUID in little endian format (in form of struct you
referenced above).

And format conversion APIs [1] in OP-TEE OS are used while passing
UUID among Linux and OP-TEE.

So we need to use %pUb in case of Linux and %pUl in case of OP-TEE.

[1] https://github.com/OP-TEE/optee_os/blob/master/core/tee/uuid.c

-Sumit

>
> --
> Jerome
>
> >
> > # ls /sys/bus/tee/devices/
> > optee-ta-405b6ad9-e5c3-e321-8794-1002a5d5c61b
> > optee-ta-71d950bc-c9d4-c442-82cb-343fb7f37896
> > optee-ta-e70f4af0-5d1f-9b4b-abf7-619b85b4ce8c
> >
> > While UUID for fTPM TA is in big endian format:
> > bc50d971-d4c9-42c4-82cb-343fb7f37896
> >
> > Sorry that I missed it during review and noticed this while testing.
> >
> > With the above fix included, I tested this series using fTPM early TA
> > on Qemu for aarch64 and used basic random number generation test using
> > tpm2-tools. So feel free to add:
> >
> > Tested-by: Sumit Garg <sumit.garg@linaro.org>
> >
> > -Sumit
> >
> >> + kfree(optee_device);
> >> + return -ENOMEM;
> >> + }
> >> uuid_copy(&optee_device->id.uuid, device_uuid);
> >>
> >> rc = device_register(&optee_device->dev);
> >> @@ -144,7 +147,7 @@ int optee_enumerate_devices(void)
> >> num_devices = shm_size / sizeof(uuid_t);
> >>
> >> for (idx = 0; idx < num_devices; idx++) {
> >> - rc = optee_register_device(&device_uuid[idx], idx);
> >> + rc = optee_register_device(&device_uuid[idx]);
> >> if (rc)
> >> goto out_shm;
> >> }
> >> --
> >> 2.17.1
> >>
> > _______________________________________________
> > Tee-dev mailing list
> > Tee-dev@lists.linaro.org
> > https://lists.linaro.org/mailman/listinfo/tee-dev
> >

\
 
 \ /
  Last update: 2020-06-18 07:01    [W:0.111 / U:1.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site