lkml.org 
[lkml]   [2020]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 3/3] hwmon: sparx5: Add Sparx5 SoC temperature driver
Date
This patch adds a temperature sensor driver to the Sparx5 SoC.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
---
Documentation/hwmon/sparx5-temp.rst | 33 ++++++
drivers/hwmon/Kconfig | 10 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/sparx5-temp.c | 168 ++++++++++++++++++++++++++++
4 files changed, 212 insertions(+)
create mode 100644 Documentation/hwmon/sparx5-temp.rst
create mode 100644 drivers/hwmon/sparx5-temp.c

diff --git a/Documentation/hwmon/sparx5-temp.rst b/Documentation/hwmon/sparx5-temp.rst
new file mode 100644
index 0000000000000..0140809089542
--- /dev/null
+++ b/Documentation/hwmon/sparx5-temp.rst
@@ -0,0 +1,33 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Microchip SparX-5 SoC
+=====================
+
+Supported chips:
+
+ * VSC7546, VSC7549, VSC755, VSC7556, and VSC7558 (Sparx5 series)
+
+ Prefix: 'sparx5-temp'
+
+ Addresses scanned: -
+
+ Datasheet: Provided by Microchip upon request and under NDA
+
+Author: Lars Povlsen <lars.povlsen@microchip.com>
+
+Description
+-----------
+
+The Sparx5 SoC contains a temperature sensor based on the MR74060
+Moortec IP.
+
+The sensor has a range of -40°C to +125°C and an accuracy of +/-5°C.
+
+Sysfs entries
+-------------
+
+The following attributes are supported.
+
+======================= ========================================================
+temp1_input Die temperature (in millidegree Celsius.)
+======================= ========================================================
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 288ae9f63588c..7fb5e0c6c6306 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -515,6 +515,16 @@ config SENSORS_I5K_AMB
This driver can also be built as a module. If so, the module
will be called i5k_amb.

+config SENSORS_SPARX5
+ tristate "Sparx5 SoC temperature sensor"
+ depends on ARCH_SPARX5 || COMPILE_TEST
+ help
+ If you say yes here you get support for temperature monitoring
+ with the Microchip Sparx5 SoC.
+
+ This driver can also be built as a module. If so, the module
+ will be called sparx5-temp.
+
config SENSORS_F71805F
tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
depends on !PPC
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 3e32c21f5efe3..857293f650412 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -167,6 +167,7 @@ obj-$(CONFIG_SENSORS_SMM665) += smm665.o
obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
+obj-$(CONFIG_SENSORS_SPARX5) += sparx5-temp.o
obj-$(CONFIG_SENSORS_STTS751) += stts751.o
obj-$(CONFIG_SENSORS_AMC6821) += amc6821.o
obj-$(CONFIG_SENSORS_TC74) += tc74.o
diff --git a/drivers/hwmon/sparx5-temp.c b/drivers/hwmon/sparx5-temp.c
new file mode 100644
index 0000000000000..7d7a060259a80
--- /dev/null
+++ b/drivers/hwmon/sparx5-temp.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* Sparx5 SoC temperature sensor driver
+ *
+ * Copyright (C) 2020 Lars Povlsen <lars.povlsen@microchip.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/hwmon.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#define TEMP_CTRL 0
+#define TEMP_CFG 4
+#define TEMP_CFG_CYCLES GENMASK(24, 15)
+#define TEMP_CFG_ENA BIT(0)
+#define TEMP_STAT 8
+#define TEMP_STAT_VALID BIT(12)
+#define TEMP_STAT_TEMP GENMASK(11, 0)
+
+struct s5_hwmon {
+ void __iomem *base;
+ struct clk *clk;
+};
+
+static void s5_temp_clk_disable(void *data)
+{
+ struct clk *clk = data;
+
+ clk_disable_unprepare(clk);
+}
+
+static void s5_temp_enable(struct s5_hwmon *hwmon)
+{
+ u32 val = readl(hwmon->base + TEMP_CFG);
+ u32 clk = clk_get_rate(hwmon->clk) / USEC_PER_SEC;
+
+ val &= ~TEMP_CFG_CYCLES;
+ val |= FIELD_PREP(TEMP_CFG_CYCLES, clk);
+ val |= TEMP_CFG_ENA;
+
+ writel(val, hwmon->base + TEMP_CFG);
+}
+
+static int s5_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *temp)
+{
+ struct s5_hwmon *hwmon = dev_get_drvdata(dev);
+ int rc = 0, value;
+ u32 stat;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ stat = readl_relaxed(hwmon->base + TEMP_STAT);
+ if (!(stat & TEMP_STAT_VALID))
+ return -EIO;
+ value = stat & TEMP_STAT_TEMP;
+ /*
+ * From register documentation:
+ * Temp(C) = TEMP_SENSOR_STAT.TEMP / 4096 * 352.2 - 109.4
+ */
+ value = DIV_ROUND_CLOSEST(value * 3522, 4096) - 1094;
+ /*
+ * Scale down by 10 from above and multiply by 1000 to
+ * have millidegrees as specified by the hwmon sysfs
+ * interface.
+ */
+ value *= 100;
+ *temp = value;
+ break;
+ default:
+ rc = -EOPNOTSUPP;
+ break;
+ }
+
+ return rc;
+}
+
+static umode_t s5_is_visible(const void *_data, enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ if (type != hwmon_temp)
+ return 0;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ return 0444;
+ default:
+ return 0;
+ }
+}
+
+static const struct hwmon_channel_info *s5_info[] = {
+ HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
+ HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
+ NULL
+};
+
+static const struct hwmon_ops s5_hwmon_ops = {
+ .is_visible = s5_is_visible,
+ .read = s5_read,
+};
+
+static const struct hwmon_chip_info s5_chip_info = {
+ .ops = &s5_hwmon_ops,
+ .info = s5_info,
+};
+
+static int s5_temp_probe(struct platform_device *pdev)
+{
+ struct device *hwmon_dev;
+ struct s5_hwmon *hwmon;
+ int ret;
+
+ hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL);
+ if (!hwmon)
+ return -ENOMEM;
+
+ hwmon->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(hwmon->base))
+ return PTR_ERR(hwmon->base);
+
+ hwmon->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(hwmon->clk))
+ return PTR_ERR(hwmon->clk);
+
+ ret = clk_prepare_enable(hwmon->clk);
+ if (ret)
+ return ret;
+
+ ret = devm_add_action_or_reset(&pdev->dev, s5_temp_clk_disable,
+ hwmon->clk);
+ if (ret)
+ return ret;
+
+ s5_temp_enable(hwmon);
+
+ hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
+ "s5_temp",
+ hwmon,
+ &s5_chip_info,
+ NULL);
+
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+const struct of_device_id s5_temp_match[] = {
+ { .compatible = "microchip,sparx5-temp" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, s5_temp_match);
+
+static struct platform_driver s5_temp_driver = {
+ .probe = s5_temp_probe,
+ .driver = {
+ .name = "sparx5-temp",
+ .of_match_table = s5_temp_match,
+ },
+};
+
+module_platform_driver(s5_temp_driver);
+
+MODULE_AUTHOR("Lars Povlsen <lars.povlsen@microchip.com>");
+MODULE_DESCRIPTION("Sparx5 SoC temperature sensor driver");
+MODULE_LICENSE("GPL");
--
2.27.0
\
 
 \ /
  Last update: 2020-06-18 16:02    [W:0.083 / U:0.656 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site