lkml.org 
[lkml]   [2020]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] dt-bindings: mmc: pwrseq: Fix syntax errors in device tree examples
On Thu, 18 Jun 2020 at 10:52, Jisheng Zhang <Jisheng.Zhang@synaptics.com> wrote:
>
> A ";" is missing in the pwrseq dt examples, fix them.

Rather than fixing old docs, how about converting them to the yaml format?

Kind regards
Uffe

>
> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
> ---
> Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt | 2 +-
> Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt | 2 +-
> Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt | 2 +-
> 3 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt
> index 3d965d57e00b..c4fb06bf0bc2 100644
> --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt
> +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt
> @@ -22,4 +22,4 @@ Example:
> sdhci0_pwrseq {
> compatible = "mmc-pwrseq-emmc";
> reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
> - }
> + };
> diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
> index 22e9340e4ba2..8204374546e1 100644
> --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
> +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
> @@ -13,4 +13,4 @@ Example:
> compatible = "mmc-pwrseq-sd8787";
> powerdown-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
> reset-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
> - }
> + };
> diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
> index 9029b45b8a22..bcbe8e947459 100644
> --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
> +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
> @@ -28,4 +28,4 @@ Example:
> reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
> clocks = <&clk_32768_ck>;
> clock-names = "ext_clock";
> - }
> + };
> --
> 2.27.0
>

\
 
 \ /
  Last update: 2020-06-18 13:35    [W:0.042 / U:0.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site