lkml.org 
[lkml]   [2020]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] PCI: qcom: Disable power management for uPD720201 USB3 controller
On Tue, Jun 16, 2020 at 04:17:11PM -0500, Bjorn Helgaas wrote:
> On Mon, Jun 15, 2020 at 09:24:13PM +0300, Georgi Djakov wrote:
> > The uPD720201 USB3 host controller (connected to PCIe) on the Dragonboard
> > 845c is often failing during suspend and resume. The following messages
> > are seen over the console:
> >
> > PM: suspend entry (s2idle)
> > Filesystems sync: 0.000 seconds
> > Freezing user space processes ... (elapsed 0.001 seconds) done.
> > OOM killer disabled.
> > Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
> > printk: Suspending console(s) (use no_console_suspend to debug)
> > dwc3-qcom a8f8800.usb: HS-PHY not in L2
> > dwc3-qcom a6f8800.usb: HS-PHY not in L2
> > xhci_hcd 0000:01:00.0: can't change power state from D3hot to D0 (config
> > space inaccessible)
> > xhci_hcd 0000:01:00.0: can't change power state from D3hot to D0 (config
> > space inaccessible)
> > xhci_hcd 0000:01:00.0: Controller not ready at resume -19
> > xhci_hcd 0000:01:00.0: PCI post-resume error -19!
> > xhci_hcd 0000:01:00.0: HC died; cleaning up
> >
> > Then the USB devices are not functional anymore. Let's disable the PM of
> > the controller for now, as this will at least keep USB devices working
> > even after suspend and resume.

Georgi, can you collect the complete dmesg log and "sudo lspci
-vvxxxx" output somewhere? A new report at bugzilla.kernel.org would
be a good spot.

Maybe we're missing a delay here. The "config space inaccessible"
message means we read 0xffff from PCI_PM_CTRL, which probably means
the device is still in D3cold. If it were in any other power state,
PCI_PM_CTRL should be readable, and 0xffff is not a valid value.

Could you also insert a dump_stack() right after we print that "config
space inaccessible" message? I don't know enough about power
management to understand why we see that message twice.

> This seems like we're just covering up a deeper problem here. I think
> it would be better to fix the underlying problem.
>
> The quirk you're adding is specific to the Renesas 0x0014 device. Is
> there some reason to think the problem is specific to that device, or
> might other devices have the same problem?
>
> Maybe we're missing something in pcie-qcom.c? Is there any
> suspend/resume support required in that driver? It doesn't look like
> it has anything except that it calls pm_runtime_enable().
>
> > Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
> > ---
> > drivers/pci/controller/dwc/pcie-qcom.c | 8 ++++++++
> > 1 file changed, 8 insertions(+)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> > index 138e1a2d21cc..c1f502682a19 100644
> > --- a/drivers/pci/controller/dwc/pcie-qcom.c
> > +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> > @@ -1439,6 +1439,13 @@ static void qcom_fixup_class(struct pci_dev *dev)
> > {
> > dev->class = PCI_CLASS_BRIDGE_PCI << 8;
> > }
> > +
> > +static void qcom_fixup_nopm(struct pci_dev *dev)
> > +{
> > + dev->pm_cap = 0;
> > + dev_info(&dev->dev, "Disabling PCI power management\n");
> > +}
> > +
> > DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0101, qcom_fixup_class);
> > DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0104, qcom_fixup_class);
> > DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0106, qcom_fixup_class);
> > @@ -1446,6 +1453,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0107, qcom_fixup_class);
> > DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0302, qcom_fixup_class);
> > DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1000, qcom_fixup_class);
> > DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1001, qcom_fixup_class);
> > +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_RENESAS, 0x0014, qcom_fixup_nopm);
>
> The convention is that DECLARE_PCI_FIXUP_*() comes immediately after
> the quirk function itself, so the whole patch would be a single diff
> hunk. See drivers/pci/quirks.c for many examples.
>
> > static struct platform_driver qcom_pcie_driver = {
> > .probe = qcom_pcie_probe,

\
 
 \ /
  Last update: 2020-06-19 01:20    [W:0.159 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site