lkml.org 
[lkml]   [2020]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 02/15] iommu: Report domain nesting info
[+ Will and Robin]

Hi Yi,

On Thu, Jun 11, 2020 at 05:15:21AM -0700, Liu Yi L wrote:
> IOMMUs that support nesting translation needs report the capability info
> to userspace, e.g. the format of first level/stage paging structures.
>
> Cc: Kevin Tian <kevin.tian@intel.com>
> CC: Jacob Pan <jacob.jun.pan@linux.intel.com>
> Cc: Alex Williamson <alex.williamson@redhat.com>
> Cc: Eric Auger <eric.auger@redhat.com>
> Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
> Cc: Joerg Roedel <joro@8bytes.org>
> Cc: Lu Baolu <baolu.lu@linux.intel.com>
> Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> ---
> @Jean, Eric: as nesting was introduced for ARM, but looks like no actual
> user of it. right? So I'm wondering if we can reuse DOMAIN_ATTR_NESTING
> to retrieve nesting info? how about your opinions?

Sure, I think we could rework the getters for DOMAIN_ATTR_NESTING since
they aren't used, but we do need to keep the setters as is.

Before attaching a domain, VFIO sets DOMAIN_ATTR_NESTING if userspace
requested a VFIO_TYPE1_NESTING_IOMMU container. This is necessary for the
SMMU driver to know how to attach later, but at that point we don't know
whether the SMMU does support nesting (since the domain isn't attached to
any endpoint). During attach, the SMMU driver adapts to the SMMU's
capabilities, and may well fallback to one stage if the SMMU doesn't
support nesting.

VFIO should check after attaching that the nesting attribute held, by
calling iommu_domain_get_attr(NESTING). At the moment it does not, and
since your 03/15 patch does that with additional info, I agree with
reusing DOMAIN_ATTR_NESTING instead of adding DOMAIN_ATTR_NESTING_INFO.

However it requires changing the get_attr(NESTING) implementations in both
SMMU drivers as a precursor of this series, to avoid breaking
VFIO_TYPE1_NESTING_IOMMU on Arm. Since we haven't yet defined the
nesting_info structs for SMMUv2 and v3, I suppose we could return an empty
struct iommu_nesting_info for now?

>
> include/linux/iommu.h | 1 +
> include/uapi/linux/iommu.h | 34 ++++++++++++++++++++++++++++++++++
> 2 files changed, 35 insertions(+)
>
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index 78a26ae..f6e4b49 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -126,6 +126,7 @@ enum iommu_attr {
> DOMAIN_ATTR_FSL_PAMUV1,
> DOMAIN_ATTR_NESTING, /* two stages of translation */
> DOMAIN_ATTR_DMA_USE_FLUSH_QUEUE,
> + DOMAIN_ATTR_NESTING_INFO,
> DOMAIN_ATTR_MAX,
> };
>
> diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h
> index 303f148..02eac73 100644
> --- a/include/uapi/linux/iommu.h
> +++ b/include/uapi/linux/iommu.h
> @@ -332,4 +332,38 @@ struct iommu_gpasid_bind_data {
> };
> };
>
> +struct iommu_nesting_info {
> + __u32 size;
> + __u32 format;

What goes into format? And flags? This structure needs some documentation.

Thanks,
Jean

> + __u32 features;
> +#define IOMMU_NESTING_FEAT_SYSWIDE_PASID (1 << 0)
> +#define IOMMU_NESTING_FEAT_BIND_PGTBL (1 << 1)
> +#define IOMMU_NESTING_FEAT_CACHE_INVLD (1 << 2)
> + __u32 flags;
> + __u8 data[];
> +};
> +
> +/*
> + * @flags: VT-d specific flags. Currently reserved for future
> + * extension.
> + * @addr_width: The output addr width of first level/stage translation
> + * @pasid_bits: Maximum supported PASID bits, 0 represents no PASID
> + * support.
> + * @cap_reg: Describe basic capabilities as defined in VT-d capability
> + * register.
> + * @cap_mask: Mark valid capability bits in @cap_reg.
> + * @ecap_reg: Describe the extended capabilities as defined in VT-d
> + * extended capability register.
> + * @ecap_mask: Mark the valid capability bits in @ecap_reg.
> + */
> +struct iommu_nesting_info_vtd {
> + __u32 flags;
> + __u16 addr_width;
> + __u16 pasid_bits;
> + __u64 cap_reg;
> + __u64 cap_mask;
> + __u64 ecap_reg;
> + __u64 ecap_mask;
> +};
> +
> #endif /* _UAPI_IOMMU_H */
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2020-06-17 16:40    [W:0.397 / U:0.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site