lkml.org 
[lkml]   [2020]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [RFC PATCH v2 2/5] scsi: ufs: Add UFS-feature layer
Date

>
> This patch is adding UFS feature layer to UFS core driver.
>
> UFS Driver data structure (struct ufs_hba)
> │
> ┌--------------┐
> │ UFS feature │ <-- HPB module
> │ layer │ <-- other extended feature module
> └--------------┘
> Each extended UFS-Feature module has a bus of ufs-ext feature type.
> The UFS feature layer manages common APIs used by each extended feature
> module. The APIs are set of UFS Query requests and UFS Vendor commands
> related to each extended feature module.
>
> Other extended features can also be implemented using the proposed APIs.
> For example, in Write Booster, "prep_fn" can be used to guarantee the
> lifetime of UFS by updating the amount of write IO.
> And reset/reset_host/suspend/resume can be used to manage the kernel task
> for checking lifetime of UFS.
>
> The following 6 callback functions have been added to "ufshcd.c".
> prep_fn: called after construct upiu structure
> reset: called after proving hba
> reset_host: called before ufshcd_host_reset_and_restore
> suspend: called before ufshcd_suspend
> resume: called after ufshcd_resume
> rsp_upiu: called in ufshcd_transfer_rsp_status with SAM_STAT_GOOD state
>
> Signed-off-by: Daejun Park <daejun7.park@samsung.com>
> ---
> drivers/scsi/ufs/Makefile | 2 +-
> drivers/scsi/ufs/ufsfeature.c | 148 ++++++++++++++++++++++++++++++++++
> drivers/scsi/ufs/ufsfeature.h | 69 ++++++++++++++++
> drivers/scsi/ufs/ufshcd.c | 17 ++++
> drivers/scsi/ufs/ufshcd.h | 3 +
> 5 files changed, 238 insertions(+), 1 deletion(-)
> create mode 100644 drivers/scsi/ufs/ufsfeature.c
> create mode 100644 drivers/scsi/ufs/ufsfeature.h
>
> diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
> index 94c6c5d7334b..fe3a92b06c87 100644
> --- a/drivers/scsi/ufs/Makefile
> +++ b/drivers/scsi/ufs/Makefile
> @@ -5,7 +5,7 @@ obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-
> g210-pltfrm.o ufshcd-dwc.o tc-d
> obj-$(CONFIG_SCSI_UFS_CDNS_PLATFORM) += cdns-pltfrm.o
> obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
> obj-$(CONFIG_SCSI_UFSHCD) += ufshcd-core.o
> -ufshcd-core-y += ufshcd.o ufs-sysfs.o
> +ufshcd-core-y += ufshcd.o ufs-sysfs.o ufsfeature.o
How about making it
> ufshcd-core-$(CONFIG_UFS_FEATURES) += ufsfeature.o
So that you won't check none-hpb driver on every response etc.

\
 
 \ /
  Last update: 2020-06-17 09:08    [W:1.092 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site