lkml.org 
[lkml]   [2020]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/2]usb : phy: Add USB PHY support on Intel LGM SoC
Date
The USB PHY provides the optimized for low power dissipation while active, idle, or on standby.
Requires minimal external components, a single resistor, for best operation.
Supports 10/5-Gbps high-speed data transmission rates through 3-m USB 3.x cable
---
v4:
- Andy's review comments addressed
- drop the excess error debug prints
- error check optimized
- merge the split line to one line
v3:
- Andy's review comments update
- hardcode return value changed to actual return value from the callee
- add error check is fixed according to the above
- correct the assignment in redundant
- combine the split line into one line
v2:
- Address Phillip's review comments
- replace devm_reset_control_get() by devm_reset_control_get_exclusive()
- re-design the assert and deassert fucntion calls as per review comments
- address kbuild bot warnings
- add the comments
v1:
- initial version

---
dt-bindings: usb: Add USB PHY support for Intel LGM SoC
v4:
- No Change
v3:
- No Change
v2:
- No Change
v1:
- initial version



Ramuthevar Vadivel Murugan (2):
dt-bindings: usb: Add USB PHY support for Intel LGM SoC
usb: phy: Add USB3 PHY support for Intel LGM SoC

.../devicetree/bindings/usb/intel,lgm-usb-phy.yaml | 53 ++++
drivers/usb/phy/Kconfig | 11 +
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/phy-lgm-usb.c | 275 +++++++++++++++++++++
4 files changed, 340 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/intel,lgm-usb-phy.yaml
create mode 100644 drivers/usb/phy/phy-lgm-usb.c

--
2.11.0

\
 
 \ /
  Last update: 2020-06-17 06:01    [W:0.352 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site