lkml.org 
[lkml]   [2020]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V4 2/2] dt-bindings: mmc: sdhci-msm: Add interconnect BW scaling strings
On Tue, 9 Jun 2020 at 10:38, Pradeep P V K <ppvk@codeaurora.org> wrote:
>
> Add interconnect bandwidth scaling supported strings for qcom-sdhci
> controller.
>
> Signed-off-by: Pradeep P V K <ppvk@codeaurora.org>
> Acked-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Applied for next, thanks!

Kind regards
Uffe


> ---
> Documentation/devicetree/bindings/mmc/sdhci-msm.txt | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
> index b8e1d2b..3b602fd 100644
> --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
> +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
> @@ -54,6 +54,21 @@ Required properties:
> - qcom,dll-config: Chipset and Platform specific value. Use this field to
> specify the DLL_CONFIG register value as per Hardware Programming Guide.
>
> +Optional Properties:
> +* Following bus parameters are required for interconnect bandwidth scaling:
> +- interconnects: Pairs of phandles and interconnect provider specifier
> + to denote the edge source and destination ports of
> + the interconnect path.
> +
> +- interconnect-names: For sdhc, we have two main paths.
> + 1. Data path : sdhc to ddr
> + 2. Config path : cpu to sdhc
> + For Data interconnect path the name supposed to be
> + is "sdhc-ddr" and for config interconnect path it is
> + "cpu-sdhc".
> + Please refer to Documentation/devicetree/bindings/
> + interconnect/ for more details.
> +
> Example:
>
> sdhc_1: sdhci@f9824900 {
> @@ -71,6 +86,9 @@ Example:
>
> clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
> clock-names = "core", "iface";
> + interconnects = <&qnoc MASTER_SDCC_ID &qnoc SLAVE_DDR_ID>,
> + <&qnoc MASTER_CPU_ID &qnoc SLAVE_SDCC_ID>;
> + interconnect-names = "sdhc-ddr","cpu-sdhc";
>
> qcom,dll-config = <0x000f642c>;
> qcom,ddr-config = <0x80040868>;
> --
> 1.9.1
>

\
 
 \ /
  Last update: 2020-06-16 13:34    [W:0.068 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site