lkml.org 
[lkml]   [2020]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 14/15] vfio: Document dual stage control
On Thu, Jun 11, 2020 at 05:15:33AM -0700, Liu Yi L wrote:
> From: Eric Auger <eric.auger@redhat.com>
>
> The VFIO API was enhanced to support nested stage control: a bunch of
> new iotcls and usage guideline.
>
> Let's document the process to follow to set up nested mode.
>
> Cc: Kevin Tian <kevin.tian@intel.com>
> CC: Jacob Pan <jacob.jun.pan@linux.intel.com>
> Cc: Alex Williamson <alex.williamson@redhat.com>
> Cc: Eric Auger <eric.auger@redhat.com>
> Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
> Cc: Joerg Roedel <joro@8bytes.org>
> Cc: Lu Baolu <baolu.lu@linux.intel.com>
> Signed-off-by: Eric Auger <eric.auger@redhat.com>
> Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
> ---
> v1 -> v2:
> *) new in v2, compared with Eric's original version, pasid table bind
> and fault reporting is removed as this series doesn't cover them.
> Original version from Eric.
> https://lkml.org/lkml/2020/3/20/700
>
> Documentation/driver-api/vfio.rst | 64 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 64 insertions(+)
>
> diff --git a/Documentation/driver-api/vfio.rst b/Documentation/driver-api/vfio.rst
> index f1a4d3c..06224bd 100644
> --- a/Documentation/driver-api/vfio.rst
> +++ b/Documentation/driver-api/vfio.rst
> @@ -239,6 +239,70 @@ group and can access them as follows::
> /* Gratuitous device reset and go... */
> ioctl(device, VFIO_DEVICE_RESET);
>
> +IOMMU Dual Stage Control
> +------------------------
> +
> +Some IOMMUs support 2 stages/levels of translation. Stage corresponds to
> +the ARM terminology while level corresponds to Intel's VTD terminology.
> +In the following text we use either without distinction.
> +
> +This is useful when the guest is exposed with a virtual IOMMU and some
> +devices are assigned to the guest through VFIO. Then the guest OS can use
> +stage 1 (GIOVA -> GPA or GVA->GPA), while the hypervisor uses stage 2 for
> +VM isolation (GPA -> HPA).
> +
> +Under dual stage translation, the guest gets ownership of the stage 1 page
> +tables and also owns stage 1 configuration structures. The hypervisor owns
> +the root configuration structure (for security reason), including stage 2
> +configuration. This works as long configuration structures and page table

s/as long configuration/as long as configuration/

> +format are compatible between the virtual IOMMU and the physical IOMMU.

s/format/formats/

> +
> +Assuming the HW supports it, this nested mode is selected by choosing the
> +VFIO_TYPE1_NESTING_IOMMU type through:
> +
> + ioctl(container, VFIO_SET_IOMMU, VFIO_TYPE1_NESTING_IOMMU);
> +
> +This forces the hypervisor to use the stage 2, leaving stage 1 available
> +for guest usage. The guest stage 1 format depends on IOMMU vendor, and
> +it is the same with the nesting configuration method. User space should
> +check the format and configuration method after setting nesting type by
> +using:
> +
> + ioctl(container->fd, VFIO_IOMMU_GET_INFO, &nesting_info);
> +
> +Details can be found in Documentation/userspace-api/iommu.rst. For Intel
> +VT-d, each stage 1 page table is bound to host by:
> +
> + nesting_op->flags = VFIO_IOMMU_NESTING_OP_BIND_PGTBL;
> + memcpy(&nesting_op->data, &bind_data, sizeof(bind_data));
> + ioctl(container->fd, VFIO_IOMMU_NESTING_OP, nesting_op);
> +
> +As mentioned above, guest OS may use stage 1 for GIOVA->GPA or GVA->GPA.
> +GVA->GPA page tables are available when PASID (Process Address Space ID)
> +is exposed to guest. e.g. guest with PASID-capable devices assigned. For
> +such page table binding, the bind_data should include PASID info, which
> +is allocated by guest itself or by host. This depends on hardware vendor
> +e.g. Intel VT-d requires to allocate PASID from host. This requirement is
> +available by VFIO_IOMMU_GET_INFO. User space could allocate PASID from
> +host by:
> +
> + req.flags = VFIO_IOMMU_ALLOC_PASID;
> + ioctl(container, VFIO_IOMMU_PASID_REQUEST, &req);

It is not clear how the userspace application determines whether PASIDs
must be allocated from the host via VFIO_IOMMU_PASID_REQUEST or if the
guest itself can allocate PASIDs. The text mentions VFIO_IOMMU_GET_INFO
but what exactly should the userspace application check?
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-06-15 11:43    [W:0.448 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site