Messages in this thread | | | Subject | Re: [PATCH v4 0/4] Enable stmpe811 touch screen on stm32f429-disco board | From | Alexandre Torgue <> | Date | Mon, 15 Jun 2020 11:08:47 +0200 |
| |
Hi Dillon
On 6/9/20 3:26 PM, dillon.minfei@gmail.com wrote: > From: dillon min <dillon.minfei@gmail.com> > > This patchset is intend to enable stmpe811 touch screen on stm32f429-disco > board with three dts and one i2c driver changes. > > has been validated by ts_print tool > > Changes log: > V4: indroduce 'IIC_LAST_BYTE_POS' to compatible with xipkernel boot > > V3: just add change log in [PATCH V3 3/4] below --- > > V2: remove id, blocks, irq-trigger from stmpe811 dts > > V1: > ARM: dts: stm32: add I2C3 support on STM32F429 SoC > ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4 > ARM: dts: stm32: enable stmpe811 on stm32429-disco board > i2c: stm32f4: Fix stmpe811 get xyz data timeout issue > > dillon min (4): > ARM: dts: stm32: add I2C3 support on STM32F429 SoC > ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4 > ARM: dts: stm32: enable stmpe811 on stm32429-disco board > i2c: stm32f4: Fix stmpe811 get xyz data timeout issue > > arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 12 +++++++++ > arch/arm/boot/dts/stm32f429-disco.dts | 47 ++++++++++++++++++++++++++++++++++ > arch/arm/boot/dts/stm32f429.dtsi | 12 +++++++++ > drivers/i2c/busses/i2c-stm32f4.c | 12 ++++++--- > 4 files changed, 80 insertions(+), 3 deletions(-) >
DT patches applied on stm32-next. I changed node ordering in patch 3.
Thanks Alex
| |