lkml.org 
[lkml]   [2020]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
On 14-06-20, 13:04, Robin Gong wrote:
> On 2020/06/12 22:16 Mark Brown <broonie@kernel.org> wrote:
> > On Fri, Jun 12, 2020 at 01:48:41PM +0000, Robin Gong wrote:
> > > On 2020/06/12 18:14 Mark Brown <broonie@kernel.org> wrote:
> >
> > > > Please look at the formatting of your e-mails - they're really hard
> > > > to read. The line length is over 80 columns and there's no breaks between
> > paragraphs.
> >
> > > Sorry for that, seems my outlook format issue, hope it's ok now this
> > > time :)
> >
> > Yes, looks good thanks!
> >
> > > > Client could enable this feature by choosing SPI_MASTER_FALLBACK
> > > > freely without any impact on others.
> >
> > > > SPI_MASTER_FALLBACK. If this works why would any driver not enable
> > > > the flag?
> >
> > > Just make sure little impact if it's not good enough and potential
> > > issue may come out after it's merged into mainline. TBH, I'm not sure
> > > if it has taken care all in spi core. Besides, I don't know if other spi client need
> > this feature.
> >
> > It's not something that's going to come up a lot for most devices, it'd be a
> > mapping failure due to running out of memory or something, but your point
> > about that being possible is valid.
> >
> > > > > Any error happen in DMA could fallback to PIO , seems a nice to
> > > > > have,
> > > > because it could
> > > > > give chance to run in PIO which is more reliable. But if there is
> > > > > also error in
> >
> > > > PIO, thus may loop here, it's better adding limit try times here?
> >
> > > > An error doesn't mean nothing happened on the bus, an error could
> > > > for example also be something like a FIFO overrun which corrupts data.
> >
> > > Do you mean fallback to PIO may cause FIFO overrun since some latency
> > > involved so that this patch seems not useful as expected?
> >
> > No, I mean that the reason the DMA transfer fails may be something that
> > happens after we've started putting things on the bus - the bit about FIFOs is
> > just a random example of an error that could happen.
> >
> Sorry Mark for that I can't get your point... The bus error such as data corrupt
> seems not the spi core's business since it can only be caught in spi controller
> driver or upper level such as mtd driver (spi-nor) which know what's the failure
> happen at spi bus HW level or what's the correct data/message. In other words,
> spi core can't detect such error by transfer_one().
>
> > > > It *could* but only in extreme situations, and again this isn't just
> > > > handling errors from failure to prepare the hardware but also
> > > > anything that happens after it.
> >
> > > Okay, understood your point. You prefer to some interface provided by
> > > dma engine before dmaengine_prep_slave_sg so that can_dma() can know
> > > if this dma channel is ready indeed. But unfortunately, seems there is no
> > one....
> >
> > Well, this is free software and everything can be modified! The other option
> > would be framework changes in SPI that allowed us to indicate from the driver
> > that an error occured before we started doing anything to the hardware (like
> > happens here) through something like a special error code or splitting up the
> > API.
> Yes, but both assume spi controller driver could detect such dma failure before
> dmaengine_prep_*(). Let's wait Vinod's comment for that if dmaengine_slave_config
> could keep direction.

The direction is already in the prep_ call, so sending in
dmaengine_slave_config is not required, pls pass it in the prep_ call

> But despite of that case, do you think this patch is valid for transfer_one() failue
> in dma and fallback to pio?

--
~Vinod

\
 
 \ /
  Last update: 2020-06-15 09:20    [W:0.265 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site