lkml.org 
[lkml]   [2020]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] spi: spi-fsl-dspi: Initialize completion before possible interrupt
On Sun, Jun 14, 2020 at 06:34:33PM +0300, Vladimir Oltean wrote:
> On Sun, 14 Jun 2020 at 18:12, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> >
> > On Sun, Jun 14, 2020 at 04:43:28PM +0300, Vladimir Oltean wrote:
> > > On Sun, 14 Jun 2020 at 16:39, Vladimir Oltean <olteanv@gmail.com> wrote:
> > > >
> > > > On Sun, 14 Jun 2020 at 14:18, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > > > >
> > > > > On Sun, Jun 14, 2020 at 02:14:15PM +0300, Vladimir Oltean wrote:
> > > > > > On Sun, 14 Jun 2020 at 13:56, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > > > > > >
> > > > > > > If interrupt fires early, the dspi_interrupt() could complete
> > > > > > > (dspi->xfer_done) before its initialization happens.
> > > > > > >
> > > > > > > Fixes: 4f5ee75ea171 ("spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion")
> > >
> > > Also please note that this patch merely replaced an
> > > init_waitqueue_head with init_completion. But the "bug" (if we can
> > > call it that) originates from even before.
> >
> > Yeah, I know, the Fixes is not accurate. Backport to earlier kernels
> > would be manual so I am not sure if accurate Fixes matter.
> >
> > >
> > > > > > > Cc: <stable@vger.kernel.org>
> > > > > > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > > > > > > ---
> > > > > >
> > > > > > Why would an interrupt fire before spi_register_controller, therefore
> > > > > > before dspi_transfer_one_message could get called?
> > > > > > Is this master or slave mode?
> > > > >
> > > > > I guess practically it won't fire. It's more of a matter of logical
> > > > > order and:
> > > > > 1. Someone might fix the CONFIG_DEBUG_SHIRQ_FIXME one day,
> > > >
> > > > And what if CONFIG_DEBUG_SHIRQ_FIXME gets fixed? I uncommented it, and
> > > > still no issues. dspi_interrupt checks the status bit of the hw, sees
> > > > there's nothing to do, and returns IRQ_NONE.
> >
> > Indeed, still the logical way of initializing is to do it before any
> > possible use.
> >
> > > >
> > > > > 2. The hardware is actually initialized before and someone could attach
> > > > > to SPI bus some weird device.
> > > > >
> > > >
> > > > Some weird device that does what?
> >
> > You never know what people will connect to a SoM :).
> >
> > Wolfram made actually much better point - bootloaders are known to
> > initialize some things and leaving them in whatever state, assuming that
> > Linux kernel will redo any initialization properly.
> >
> > Best regards,
> > Krzysztof
> >
>
> I don't buy the argument.
> So ok, maybe some broken bootloader leaves a SPI_SR interrupt pending
> (do you have any example of that?). But the driver clears interrupts
> by writing SPI_SR_CLEAR in dspi_init (called _before_ requesting the
> IRQ). It clears 10 bits from the status register. There are 2 points
> to be made here:
> - The dspi_interrupt only handles data availability interrupt
> (SPI_SR_EOQF | SPI_SR_CMDTCF). Only then does it matter whether the
> completion was already initialized or not. But these interrupts _are_
> cleared. But assume they weren't. What would Linux even do with a SPI
> transfer initiated by the previously running software environment? Why
> would it be a smart thing to handle that data in the first place?
> - The 10 bits from the status register are all the bits that can be
> cleared. The rest of the register, if you look at it, contains the TX
> FIFO Counter, the Transmit Next Pointer, the RX FIFO Counter, and the
> Pop Next Pointer.
> So, unless there's something I'm missing, I don't actually see how
> this broken bootloader can do any harm to us.

Let's rephrase it: you think therefore that completion should be
initialzed *after* requesting shared interrupts? You think that exactly
that order shall be used in the source code?

Best regards,
Krzysztof


\
 
 \ /
  Last update: 2020-06-15 09:10    [W:0.061 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site