lkml.org 
[lkml]   [2020]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2 2/3] dt-bindings: spi: Convert imx cspi to json-schema
On Thu, Jun 04, 2020 at 09:55:30AM +0800, Anson Huang wrote:
> Convert the i.MX CSPI binding to DT schema format using json-schema,
> update compatible, remove obsolete properties "fsl,spi-num-chipselects"
> and update the example based on latest DT file.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> Changes since V1:
> - add "unevaluatedProperties: false".
> ---
> .../devicetree/bindings/spi/fsl-imx-cspi.txt | 56 ------------
> .../devicetree/bindings/spi/fsl-imx-cspi.yaml | 99 ++++++++++++++++++++++
> 2 files changed, 99 insertions(+), 56 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> create mode 100644 Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
>
> diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> deleted file mode 100644
> index 33bc58f..0000000
> --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> +++ /dev/null
> @@ -1,56 +0,0 @@
> -* Freescale (Enhanced) Configurable Serial Peripheral Interface
> - (CSPI/eCSPI) for i.MX
> -
> -Required properties:
> -- compatible :
> - - "fsl,imx1-cspi" for SPI compatible with the one integrated on i.MX1
> - - "fsl,imx21-cspi" for SPI compatible with the one integrated on i.MX21
> - - "fsl,imx27-cspi" for SPI compatible with the one integrated on i.MX27
> - - "fsl,imx31-cspi" for SPI compatible with the one integrated on i.MX31
> - - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
> - - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
> - - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
> - - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8MQ
> - - "fsl,imx8mm-ecspi" for SPI compatible with the one integrated on i.MX8MM
> - - "fsl,imx8mn-ecspi" for SPI compatible with the one integrated on i.MX8MN
> - - "fsl,imx8mp-ecspi" for SPI compatible with the one integrated on i.MX8MP
> -- reg : Offset and length of the register set for the device
> -- interrupts : Should contain CSPI/eCSPI interrupt
> -- clocks : Clock specifiers for both ipg and per clocks.
> -- clock-names : Clock names should include both "ipg" and "per"
> -See the clock consumer binding,
> - Documentation/devicetree/bindings/clock/clock-bindings.txt
> -
> -Recommended properties:
> -- cs-gpios : GPIOs to use as chip selects, see spi-bus.txt. While the native chip
> -select lines can be used, they appear to always generate a pulse between each
> -word of a transfer. Most use cases will require GPIO based chip selects to
> -generate a valid transaction.
> -
> -Optional properties:
> -- num-cs : Number of total chip selects, see spi-bus.txt.
> -- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
> -Documentation/devicetree/bindings/dma/dma.txt.
> -- dma-names: DMA request names, if present, should include "tx" and "rx".
> -- fsl,spi-rdy-drctl: Integer, representing the value of DRCTL, the register
> -controlling the SPI_READY handling. Note that to enable the DRCTL consideration,
> -the SPI_READY mode-flag needs to be set too.
> -Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst).
> -
> -Obsolete properties:
> -- fsl,spi-num-chipselects : Contains the number of the chipselect
> -
> -Example:
> -
> -ecspi@70010000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,imx51-ecspi";
> - reg = <0x70010000 0x4000>;
> - interrupts = <36>;
> - cs-gpios = <&gpio3 24 0>, /* GPIO3_24 */
> - <&gpio3 25 0>; /* GPIO3_25 */
> - dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
> - dma-names = "rx", "tx";
> - fsl,spi-rdy-drctl = <1>;
> -};
> diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
> new file mode 100644
> index 0000000..606af7d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
> @@ -0,0 +1,99 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spi/fsl-imx-cspi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale (Enhanced) Configurable Serial Peripheral Interface (CSPI/eCSPI) for i.MX
> +
> +maintainers:
> + - Shawn Guo <shawn.guo@linaro.org>
> +
> +allOf:
> + - $ref: "/schemas/spi/spi-controller.yaml#"
> +
> +properties:
> + compatible:
> + oneOf:
> + - const: fsl,imx1-cspi
> + - const: fsl,imx21-cspi
> + - const: fsl,imx27-cspi
> + - const: fsl,imx31-cspi
> + - const: fsl,imx35-cspi
> + - const: fsl,imx51-ecspi
> + - const: fsl,imx53-ecspi
> + - items:
> + - enum:
> + - fsl,imx50-ecspi
> + - fsl,imx6q-ecspi
> + - fsl,imx6sx-ecspi
> + - fsl,imx6sl-ecspi
> + - fsl,imx6sll-ecspi
> + - fsl,imx6ul-ecspi
> + - fsl,imx7d-ecspi
> + - fsl,imx8mq-ecspi
> + - fsl,imx8mm-ecspi
> + - fsl,imx8mn-ecspi
> + - fsl,imx8mp-ecspi
> + - const: fsl,imx51-ecspi
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: SoC SPI ipg clock
> + - description: SoC SPI per clock
> + maxItems: 2

Can drop 'maxItems', it is redundant here.

> +
> + clock-names:
> + items:
> + - const: ipg
> + - const: per
> + maxItems: 2

And here.

> +
> + dmas:
> + items:
> + - description: DMA controller phandle and request line for RX
> + - description: DMA controller phandle and request line for TX
> +
> + dma-names:
> + items:
> + - const: rx
> + - const: tx
> +
> + fsl,spi-rdy-drctl:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + Integer, representing the value of DRCTL, the register controlling
> + the SPI_READY handling. Note that to enable the DRCTL consideration,
> + the SPI_READY mode-flag needs to be set too.
> + Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst).
> + enum: [0, 1, 2]
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/imx5-clock.h>
> +
> + spi@70010000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx51-ecspi";
> + reg = <0x70010000 0x4000>;
> + interrupts = <36>;
> + clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
> + <&clks IMX5_CLK_ECSPI1_PER_GATE>;
> + clock-names = "ipg", "per";
> + };
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2020-06-15 19:15    [W:0.048 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site