lkml.org 
[lkml]   [2020]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] doc: devicetree: bindings: fix spelling mistake
Acked-by: Guo Ren <guoren@kernel.org>

On Thu, Jun 11, 2020 at 5:58 PM Flavio Suligoi <f.suligoi@asem.it> wrote:
>
> Fix typo: "triger" --> "trigger"
>
> Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
> ---
> Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt | 2 +-
> .../devicetree/bindings/interrupt-controller/csky,mpintc.txt | 2 +-
> Documentation/devicetree/bindings/timer/csky,mptimer.txt | 2 +-
> 3 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt
> index ba455589f869..e1c49b660d3a 100644
> --- a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt
> +++ b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt
> @@ -12,7 +12,7 @@ Required properties for the top level node:
> Only the GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
> - #interrupt-cells : Specifies the number of cells needed to encode an
> interrupt. Should be 2. The first cell defines the interrupt number,
> - the second encodes the triger flags encoded as described in
> + the second encodes the trigger flags encoded as described in
> Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> - compatible:
> - "mediatek,mt7621-gpio" for Mediatek controllers
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
> index e13405355166..e6bbcae4d07f 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
> +++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
> @@ -10,7 +10,7 @@ Interrupt number definition:
> 16-31 : private irq, and we use 16 as the co-processor timer.
> 31-1024: common irq for soc ip.
>
> -Interrupt triger mode: (Defined in dt-bindings/interrupt-controller/irq.h)
> +Interrupt trigger mode: (Defined in dt-bindings/interrupt-controller/irq.h)
> IRQ_TYPE_LEVEL_HIGH (default)
> IRQ_TYPE_LEVEL_LOW
> IRQ_TYPE_EDGE_RISING
> diff --git a/Documentation/devicetree/bindings/timer/csky,mptimer.txt b/Documentation/devicetree/bindings/timer/csky,mptimer.txt
> index 15cfec08fbb8..f5c7e99cf52b 100644
> --- a/Documentation/devicetree/bindings/timer/csky,mptimer.txt
> +++ b/Documentation/devicetree/bindings/timer/csky,mptimer.txt
> @@ -8,7 +8,7 @@ regs is accessed by cpu co-processor 4 registers with mtcr/mfcr.
> - PTIM_CTLR "cr<0, 14>" Control reg to start reset timer.
> - PTIM_TSR "cr<1, 14>" Interrupt cleanup status reg.
> - PTIM_CCVR "cr<3, 14>" Current counter value reg.
> - - PTIM_LVR "cr<6, 14>" Window value reg to triger next event.
> + - PTIM_LVR "cr<6, 14>" Window value reg to trigger next event.
>
> ==============================
> timer node bindings definition
> --
> 2.17.1
>


--
Best Regards
Guo Ren

ML: https://lore.kernel.org/linux-csky/

\
 
 \ /
  Last update: 2020-06-13 10:44    [W:0.883 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site