lkml.org 
[lkml]   [2020]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] arm64: tegra: Xavier SDMMC changes
Date
Hi All,

I've encountered some issues with the Xavier while integrating some of our SDIO
modules. It turns out card detection was not working for the uSD socket and
I/Os were limited to 3.3 V. Also, the on-board eMMC module was using HS200 only.
I think it would make sense for the changes to go upstream. Please have a look.

Kind regards,
Tamas

Tamás Szűcs (4):
arm64: tegra: Enable signal voltage switching on Tegra194 SDMMC1 and
SDMMC3
arm64: tegra: Fix CD on Jetson Xavier SDMMC1
arm64: tegra: Configure SDIO cards on Jetson Xavier SDMMC1
arm64: tegra: Enable HS400 on Tegra194 SDMMC4

.../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 4 +-
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 46 +++++++++++++++++++
2 files changed, 49 insertions(+), 1 deletion(-)

--
2.20.1

\
 
 \ /
  Last update: 2020-06-13 15:33    [W:0.033 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site