lkml.org 
[lkml]   [2020]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] tty: serial: cpm_uart: Fix behaviour for non existing GPIOs
Date
devm_gpiod_get_index() doesn't return NULL but -ENOENT when the
requested GPIO doesn't exist, leading to the following messages:

[ 2.742468] gpiod_direction_input: invalid GPIO (errorpointer)
[ 2.748147] can't set direction for gpio #2: -2
[ 2.753081] gpiod_direction_input: invalid GPIO (errorpointer)
[ 2.758724] can't set direction for gpio #3: -2
[ 2.763666] gpiod_direction_output: invalid GPIO (errorpointer)
[ 2.769394] can't set direction for gpio #4: -2
[ 2.774341] gpiod_direction_input: invalid GPIO (errorpointer)
[ 2.779981] can't set direction for gpio #5: -2
[ 2.784545] ff000a20.serial: ttyCPM1 at MMIO 0xfff00a20 (irq = 39, base_baud = 8250000) is a CPM UART

Use devm_gpiod_get_index_optional() instead.

At the same time, handle the error case and properly exit
with an error.

Fixes: 97cbaf2c829b ("tty: serial: cpm_uart: Convert to use GPIO descriptors")
Cc: stable@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
v2: Using devm_gpiod_get_index_optional() and exiting if error
---
drivers/tty/serial/cpm_uart/cpm_uart_core.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index a04f74d2e854..4df47d02b34b 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -1215,7 +1215,12 @@ static int cpm_uart_init_port(struct device_node *np,

pinfo->gpios[i] = NULL;

- gpiod = devm_gpiod_get_index(dev, NULL, i, GPIOD_ASIS);
+ gpiod = devm_gpiod_get_index_optional(dev, NULL, i, GPIOD_ASIS);
+
+ if (IS_ERR(gpiod)) {
+ ret = PTR_ERR(gpiod);
+ goto out_irq;
+ }

if (gpiod) {
if (i == GPIO_RTS || i == GPIO_DTR)
@@ -1237,6 +1242,8 @@ static int cpm_uart_init_port(struct device_node *np,

return cpm_uart_request_port(&pinfo->port);

+out_irq:
+ irq_dispose_mapping(pinfo->port.irq);
out_pram:
cpm_uart_unmap_pram(pinfo, pram);
out_mem:
--
2.25.0
\
 
 \ /
  Last update: 2020-06-12 20:27    [W:0.056 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site