lkml.org 
[lkml]   [2020]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectAW: [PATCH] coresight: cti: Fix error handling in probe
Date
Hi Dan,

nit picking in cti_pm_release()

IMHO this should be done in 2 steps:
if (--nr_cti_cpu == 0)
->
--nr_cti_cpu ;
if ( nr_cti_cpu == 0)

the decrement is easy to miss (what i did first).

yes, i noticed that it is also in the original code and
it is not that important but while you are here ...

jm2c,
re,
wh
________________________________________
Von: kernel-janitors-owner@vger.kernel.org <kernel-janitors-owner@vger.kernel.org> im Auftrag von Dan Carpenter <dan.carpenter@oracle.com>
Gesendet: Freitag, 12. Juni 2020 14:11:33
An: Mike Leach
Cc: Mathieu Poirier; Suzuki K Poulose; Alexander Shishkin; Greg Kroah-Hartman; linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org; kernel-janitors@vger.kernel.org
Betreff: [PATCH] coresight: cti: Fix error handling in probe

There were a couple problems with error handling in the probe function:
1) If the "drvdata" allocation failed then it lead to a NULL
dereference.
2) On several error paths we decremented "nr_cti_cpu" before it was
incremented which lead to a reference counting bug.

There were also some parts of the error handling which were not bugs but
were messy. The error handling was confusing to read. It printed some
unnecessary error messages.

The simplest way to fix these problems was to create a cti_pm_setup()
function that did all the power management setup in one go. That way
when we call cti_pm_release() we don't have to deal with the
complications of a partially configured power management config.

I reversed the "if (drvdata->ctidev.cpu >= 0)" condition in cti_pm_release()
so that it mirros the new cti_pm_setup() function.

Fixes: 6a0953ce7de9 ("coresight: cti: Add CPU idle pm notifer to CTI devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
---
Please note!!! I cannot compile this patch. Mike can you review it?

drivers/hwtracing/coresight/coresight-cti.c | 96 ++++++++++++---------
1 file changed, 54 insertions(+), 42 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-cti.c b/drivers/hwtracing/coresight/coresight-cti.c
index 40387d58c8e7..d2da5bf9f552 100644
--- a/drivers/hwtracing/coresight/coresight-cti.c
+++ b/drivers/hwtracing/coresight/coresight-cti.c
@@ -747,17 +747,50 @@ static int cti_dying_cpu(unsigned int cpu)
return 0;
}

+static int cti_pm_setup(struct cti_drvdata *drvdata)
+{
+ int ret;
+
+ if (drvdata->ctidev.cpu == -1)
+ return 0;
+
+ if (nr_cti_cpu)
+ goto done;
+
+ cpus_read_lock();
+ ret = cpuhp_setup_state_nocalls_cpuslocked(
+ CPUHP_AP_ARM_CORESIGHT_CTI_STARTING,
+ "arm/coresight_cti:starting",
+ cti_starting_cpu, cti_dying_cpu);
+ if (ret) {
+ cpus_read_unlock();
+ return ret;
+ }
+
+ ret = cpu_pm_register_notifier(&cti_cpu_pm_nb);
+ cpus_read_unlock();
+ if (ret) {
+ cpuhp_remove_state_nocalls(CPUHP_AP_ARM_CORESIGHT_CTI_STARTING);
+ return ret;
+ }
+
+done:
+ nr_cti_cpu++;
+ cti_cpu_drvdata[drvdata->ctidev.cpu] = drvdata;
+
+ return 0;
+}
+
/* release PM registrations */
static void cti_pm_release(struct cti_drvdata *drvdata)
{
- if (drvdata->ctidev.cpu >= 0) {
- if (--nr_cti_cpu == 0) {
- cpu_pm_unregister_notifier(&cti_cpu_pm_nb);
+ if (drvdata->ctidev.cpu == -1)
+ return;

- cpuhp_remove_state_nocalls(
- CPUHP_AP_ARM_CORESIGHT_CTI_STARTING);
- }
- cti_cpu_drvdata[drvdata->ctidev.cpu] = NULL;
+ cti_cpu_drvdata[drvdata->ctidev.cpu] = drvdata;
+ if (--nr_cti_cpu == 0) {
+ cpu_pm_unregister_notifier(&cti_cpu_pm_nb);
+ cpuhp_remove_state_nocalls(CPUHP_AP_ARM_CORESIGHT_CTI_STARTING);
}
}

@@ -823,19 +856,14 @@ static int cti_probe(struct amba_device *adev, const struct amba_id *id)

/* driver data*/
drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
- if (!drvdata) {
- ret = -ENOMEM;
- dev_info(dev, "%s, mem err\n", __func__);
- goto err_out;
- }
+ if (!drvdata)
+ return -ENOMEM;

/* Validity for the resource is already checked by the AMBA core */
base = devm_ioremap_resource(dev, res);
- if (IS_ERR(base)) {
- ret = PTR_ERR(base);
- dev_err(dev, "%s, remap err\n", __func__);
- goto err_out;
- }
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
drvdata->base = base;

dev_set_drvdata(dev, drvdata);
@@ -854,8 +882,7 @@ static int cti_probe(struct amba_device *adev, const struct amba_id *id)
pdata = coresight_cti_get_platform_data(dev);
if (IS_ERR(pdata)) {
dev_err(dev, "coresight_cti_get_platform_data err\n");
- ret = PTR_ERR(pdata);
- goto err_out;
+ return PTR_ERR(pdata);
}

/* default to powered - could change on PM notifications */
@@ -867,35 +894,20 @@ static int cti_probe(struct amba_device *adev, const struct amba_id *id)
drvdata->ctidev.cpu);
else
cti_desc.name = coresight_alloc_device_name(&cti_sys_devs, dev);
- if (!cti_desc.name) {
- ret = -ENOMEM;
- goto err_out;
- }
+ if (!cti_desc.name)
+ return -ENOMEM;

/* setup CPU power management handling for CPU bound CTI devices. */
- if (drvdata->ctidev.cpu >= 0) {
- cti_cpu_drvdata[drvdata->ctidev.cpu] = drvdata;
- if (!nr_cti_cpu++) {
- cpus_read_lock();
- ret = cpuhp_setup_state_nocalls_cpuslocked(
- CPUHP_AP_ARM_CORESIGHT_CTI_STARTING,
- "arm/coresight_cti:starting",
- cti_starting_cpu, cti_dying_cpu);
-
- if (!ret)
- ret = cpu_pm_register_notifier(&cti_cpu_pm_nb);
- cpus_read_unlock();
- if (ret)
- goto err_out;
- }
- }
+ ret = cti_pm_setup(drvdata);
+ if (ret)
+ return ret;

/* create dynamic attributes for connections */
ret = cti_create_cons_sysfs(dev, drvdata);
if (ret) {
dev_err(dev, "%s: create dynamic sysfs entries failed\n",
cti_desc.name);
- goto err_out;
+ goto pm_release;
}

/* set up coresight component description */
@@ -908,7 +920,7 @@ static int cti_probe(struct amba_device *adev, const struct amba_id *id)
drvdata->csdev = coresight_register(&cti_desc);
if (IS_ERR(drvdata->csdev)) {
ret = PTR_ERR(drvdata->csdev);
- goto err_out;
+ goto pm_release;
}

/* add to list of CTI devices */
@@ -927,7 +939,7 @@ static int cti_probe(struct amba_device *adev, const struct amba_id *id)
dev_info(&drvdata->csdev->dev, "CTI initialized\n");
return 0;

-err_out:
+pm_release:
cti_pm_release(drvdata);
return ret;
}
--
2.27.0
\
 
 \ /
  Last update: 2020-06-12 16:11    [W:0.303 / U:1.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site