lkml.org 
[lkml]   [2020]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] Add SW_MACHINE_COVER key
Date
this series adds the sw_machine_cover key, and changes the nokia n900 dts to
expose the key via gpio-keys.

before, this gpio was used as card detect gpio, causing the card not to show up
if the phone was booted without cover, see this thread on linux-omap:

n900: remove mmc1 "safety feature"? (was: re: mmc0 on nokia n900 on linux 5.4.18)

since there is no realistic use for using this gpio as card detect, instead
expose it to userspace via gpio-keys. there are no event type for machine covers
yet, so add that first.

the key should be 1 when the cover is closed, and 0 when the cover is open.

starting the nokia n900 with the cover removed, putting the cover in place:

event: time 1581684523.415296, type 5 (ev_sw), code 16 (?), value 1

removing the cover again, exposing mmc1 and the battery:

event: time 1581684529.413706, type 5 (ev_sw), code 16 (?), value 0

Merlijn Wajer (2):
Input: add `SW_MACHINE_COVER`
ARM: dts: n900: remove mmc1 card detect gpio

arch/arm/boot/dts/omap3-n900.dts | 12 ++++++++----
include/linux/mod_devicetable.h | 2 +-
include/uapi/linux/input-event-codes.h | 3 ++-
3 files changed, 11 insertions(+), 6 deletions(-)

--
2.24.1

\
 
 \ /
  Last update: 2020-06-12 14:53    [W:0.080 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site