lkml.org 
[lkml]   [2020]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] HID: intel-ish-hid: Replace PCI_DEV_FLAGS_NO_D3 with pci_save_state
From
Date


> On May 21, 2020, at 12:43, Kai-Heng Feng <kai.heng.feng@canonical.com> wrote:
>
> Hi Srinivas,
>
>> On May 9, 2020, at 01:45, Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> wrote:
>>
>> On Tue, 2020-05-05 at 21:17 +0800, Kai-Heng Feng wrote:
>>> PCI_DEV_FLAGS_NO_D3 should not be used outside of PCI core.
>>>
>>> Instead, we can use pci_save_state() to hint PCI core that the device
>>> should stay at D0 during suspend.
>>
>> Your changes are doing more than just changing the flag. Can you
>> explain more about the other changes?
>
> By using pci_save_state(), in addition to keep itself stay at D0, the parent bridge will also stay at D0.
> So it's a better approach to achieve the same thing.
>
>> Also make sure that you test on both platforms which has regular S3 and
>> S0ix (modern standby system).
>
> Actually I don't have any physical hardware to test the patch, I found the issue when I search for D3 quirks through the source code.
>
> Can you guys do a quick smoketest for this patch?

Tested this patch on an S2idle system with intel-ish (Latitude 9510) and it works fine.
Please consider merging this patch, thanks!

Kai-Heng

>
> Kai-Heng
>
>>
>> Thanks,
>> Srinivas
>>
>>
>>>
>>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
>>> ---
>>> drivers/hid/intel-ish-hid/ipc/pci-ish.c | 15 ++++++++++-----
>>> 1 file changed, 10 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c
>>> b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
>>> index f491d8b4e24c..ab588b9c8d09 100644
>>> --- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c
>>> +++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
>>> @@ -106,6 +106,11 @@ static inline bool ish_should_enter_d0i3(struct
>>> pci_dev *pdev)
>>> return !pm_suspend_via_firmware() || pdev->device ==
>>> CHV_DEVICE_ID;
>>> }
>>>
>>> +static inline bool ish_should_leave_d0i3(struct pci_dev *pdev)
>>> +{
>>> + return !pm_resume_via_firmware() || pdev->device ==
>>> CHV_DEVICE_ID;
>>> +}
>>> +
>>> /**
>>> * ish_probe() - PCI driver probe callback
>>> * @pdev: pci device
>>> @@ -215,9 +220,7 @@ static void __maybe_unused
>>> ish_resume_handler(struct work_struct *work)
>>> struct ishtp_device *dev = pci_get_drvdata(pdev);
>>> int ret;
>>>
>>> - /* Check the NO_D3 flag to distinguish the resume paths */
>>> - if (pdev->dev_flags & PCI_DEV_FLAGS_NO_D3) {
>>> - pdev->dev_flags &= ~PCI_DEV_FLAGS_NO_D3;
>>> + if (ish_should_leave_d0i3(pdev) && !dev->suspend_flag) {
>>> disable_irq_wake(pdev->irq);
>>>
>>> ishtp_send_resume(dev);
>>> @@ -281,8 +284,10 @@ static int __maybe_unused ish_suspend(struct
>>> device *device)
>>> */
>>> ish_disable_dma(dev);
>>> } else {
>>> - /* Set the NO_D3 flag, the ISH would enter D0i3
>>> */
>>> - pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
>>> + /* Save state so PCI core will keep the device
>>> at D0,
>>> + * the ISH would enter D0i3
>>> + */
>>> + pci_save_state(pdev);
>>>
>> Did you test on some C
>>
>>
>>> enable_irq_wake(pdev->irq);
>>> }
>

\
 
 \ /
  Last update: 2020-06-12 13:44    [W:1.680 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site