lkml.org 
[lkml]   [2020]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] i2c: imx: Fix external abort on early interrupt
On Fri, Jun 12, 2020 at 12:34:47PM +0200, Marc Kleine-Budde wrote:
> On 6/12/20 12:31 PM, Oleksij Rempel wrote:
> > On Fri, Jun 12, 2020 at 12:21:13PM +0200, Krzysztof Kozlowski wrote:
> >> On Fri, Jun 12, 2020 at 11:56:04AM +0200, Wolfram Sang wrote:
> >>> On Fri, Jun 12, 2020 at 11:29:41AM +0200, Krzysztof Kozlowski wrote:
> >>>> On Fri, Jun 12, 2020 at 11:05:17AM +0200, Wolfram Sang wrote:
> >>>>> On Wed, Jun 10, 2020 at 03:46:42PM +0200, Krzysztof Kozlowski wrote:
> >>>>>> If interrupt comes early (could be triggered with CONFIG_DEBUG_SHIRQ),
> >>>>>
> >>>>> That code is disabled since 2011 (6d83f94db95c ("genirq: Disable the
> >>>>> SHIRQ_DEBUG call in request_threaded_irq for now"))? So, you had this
> >>>>> without fake injection, I assume?
> >>>>
> >>>> No, I observed it only after enabling DEBUG_SHIRQ (to a kernel with
> >>>> some debugging options already).
> >>>
> >>> Interesting. Maybe probe was deferred and you got the extra irq when
> >>> deregistering?
> >>
> >> Yes, good catch. The abort happens right after deferred probe exit. It
> >> could be then different reason than I thought - the interrupt is freed
> >> through devm infrastructure quite late. At this time, the clock might
> >> be indeed disabled (error path of probe()).
>
> From my point of view, the clocks are disabled as Oleksij pointed out, due to
> RUNTIME_PM at the end of probe():
>
> > pm_runtime_mark_last_busy(&pdev->dev);
> > pm_runtime_put_autosuspend(&pdev->dev);

These lines come from regular successful probe path, not deferred error path.

The clock is indeed disabled but not because of runtime PM, but:
clk_disable:
clk_disable_unprepare(i2c_imx->clk);


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2020-06-12 12:44    [W:0.280 / U:0.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site