lkml.org 
[lkml]   [2020]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [PATCH 0/6] Add Microchip MCP25XXFD CAN driver
    From
    Date
    On 6/11/20 6:26 PM, Marc Kleine-Budde wrote:
    > I initially started looking at Martin's driver and it was not using several
    > modern CAN driver infrastructures. I then posted some cleanup patches but Martin
    > was not working on the driver any more. Then I decided to rewrite the driver,
    > that is the one I'm hoping to mainline soon.

    Seems the driver still suffers from the same problems the last time I looked at it:

    I'm on a raspi4 with a mcp2518fd connected to spi0 cs0 and cs1.

    Running a canfdtest -vg can0; canfdtest -v can1. It runs into this problem on a
    unloaded system and scaling_governor=performance within minutes:

    > Jun 11 21:27:08 rpi4 kernel: mcp25xxfd spi0.0 can1: Something is wrong - we got a TEF interrupt but we were not able to detect a finished fifo
    > Jun 11 21:27:08 rpi4 kernel: mcp25xxfd spi0.0 can1: Something is wrong - we got a TEF interrupt but we were not able to detect a finished fifo
    > Jun 11 21:27:08 rpi4 kernel: mcp25xxfd spi0.0 can1: tefif: fifo 6 not pending - tef data: id: 00000078 flags: 00000c08, ts: 0addbed3 - this may be a problem with spi signal quality- try reducing spi-clock speed if this can get reproduced
    > Jun 11 21:27:08 rpi4 kernel: mcp25xxfd spi0.0 can1: tefif: fifo 7 not pending - tef data: id: 00000078 flags: 00000e08, ts: 0addc2e5 - this may be a problem with spi signal quality- try reducing spi-clock speed if this can get reproduced
    > Jun 11 21:27:08 rpi4 kernel: mcp25xxfd spi0.0 can1: tefif: fifo 1 not pending - tef data: id: 00000078 flags: 00000208, ts: 0addc701 - this may be a problem with spi signal quality- try reducing spi-clock speed if this can get reproduced
    > Jun 11 21:27:08 rpi4 kernel: mcp25xxfd spi0.0 can1: tefif: fifo 2 not pending - tef data: id: 00000078 flags: 00000408, ts: 0addcb1b - this may be a problem with spi signal quality- try reducing spi-clock speed if this can get reproduced

    Marc

    --
    Pengutronix e.K. | Marc Kleine-Budde |
    Embedded Linux | https://www.pengutronix.de |
    Vertretung West/Dortmund | Phone: +49-231-2826-924 |
    Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

    \
     
     \ /
      Last update: 2020-06-11 22:31    [W:3.060 / U:0.272 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site