lkml.org 
[lkml]   [2020]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 2/3] clk: bcm: Add BCM2711 DVP driver
From
Date
Am 11.06.20 um 19:06 schrieb Florian Fainelli:
>
> On 6/11/2020 9:52 AM, Maxime Ripard wrote:
>> Hi Stefan,
>>
>> On Thu, Jun 11, 2020 at 05:50:30PM +0200, Stefan Wahren wrote:
>>>> diff --git a/drivers/clk/bcm/clk-bcm2711-dvp.c b/drivers/clk/bcm/clk-bcm2711-dvp.c
>>>> new file mode 100644
>>>> index 000000000000..84dbc886e303
>>>> --- /dev/null
>>>> +++ b/drivers/clk/bcm/clk-bcm2711-dvp.c
>>>> @@ -0,0 +1,120 @@
>>>> +// SPDX-License-Identifier: GPL-2.0-or-later
>>>> +// Copyright 2020 Cerno
>>>> +
>>>> +#include <linux/clk-provider.h>
>>>> +#include <linux/module.h>
>>>> +#include <linux/platform_device.h>
>>>> +#include <linux/reset-controller.h>
>>>> +#include <linux/reset/reset-simple.h>
>>>> +
>>>> +#define DVP_HT_RPI_SW_INIT 0x04
>>>> +#define DVP_HT_RPI_MISC_CONFIG 0x08
>>> sorry for not noticing this before. Are these defines specific to the
>>> Raspberry Pi, because of RPI?
>> I'm not entirely sure to be honest. It's the names that the register
>> have, but it's not clear to me if it's something specific to the RPi
>> itself, or it just means something else entirely.
> My understanding is that this is a wrapper that was done specifically
> for the Raspberry Pi usage of that IP block, which is why it has PI in
> the name, so this looks good correct, and this does match the internal
> register database name.

Okay, i'm fine with that and the whole series.

Acked-by: Stefan Wahren <stefan.wahren@i2se.com>

\
 
 \ /
  Last update: 2020-06-11 21:03    [W:0.680 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site