lkml.org 
[lkml]   [2020]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/6] arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865 dts
From
Date
On 6/11/20 2:05 PM, Manivannan Sadhasivam wrote:
> On Thu, Jun 04, 2020 at 07:22:21PM +0530, Manivannan Sadhasivam wrote:
>> Hi,
>>
>> On Sat, May 23, 2020 at 10:38:06PM -0400, Jonathan Marek wrote:
>>> Add dts nodes for apps_smmu and USB for both sm8150 and sm8250.
>>>
>>
>> I've tested this series on an SM8250 based board and able to get Type C (USB0)
>> working. There are also couple of Type A ports (USB1) on that board behind a
>> USB hub. It is probing fine but I don't see any activity while connecting a
>> USB device. Will continue to debug and once I get them working, I'll add my
>> Tested-by tag.
>>
>
> So it turned out that I forgot to enable one regulator which kept the USB hub
> powered down. After enabling that, both Type A ports are working. Hence,
>
> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
>
> Thanks,
> Mani
>

Thanks for testing it. Your Tested-by only applies to the relevant
patches (patches 2 and 4 in this version) right? And can I also add your
Tested-by tag to my other series
(https://patchwork.kernel.org/cover/11567095/) which this depends on?

>> Thanks,
>> Mani
>>
>>> Also add initial dts files for HDK855 and HDK865, based on mtp dts, with a
>>> few changes. Notably, the HDK865 dts has regulator config changed a bit based
>>> on downstream (I think sm8250-mtp.dts is wrong and copied too much from sm8150).
>>>
>>> Jonathan Marek (6):
>>> arm64: dts: qcom: sm8150: add apps_smmu node
>>> arm64: dts: qcom: sm8250: add apps_smmu node
>>> arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes
>>> arm64: dts: qcom: sm8250: Add USB and PHY device nodes
>>> arm64: dts: qcom: add sm8150 hdk dts
>>> arm64: dts: qcom: add sm8250 hdk dts
>>>
>>> arch/arm64/boot/dts/qcom/Makefile | 2 +
>>> arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 461 ++++++++++++++++++++++++
>>> arch/arm64/boot/dts/qcom/sm8150.dtsi | 180 +++++++++
>>> arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 454 +++++++++++++++++++++++
>>> arch/arm64/boot/dts/qcom/sm8250.dtsi | 287 +++++++++++++++
>>> 5 files changed, 1384 insertions(+)
>>> create mode 100644 arch/arm64/boot/dts/qcom/sm8150-hdk.dts
>>> create mode 100644 arch/arm64/boot/dts/qcom/sm8250-hdk.dts
>>>
>>> --
>>> 2.26.1
>>>

\
 
 \ /
  Last update: 2020-06-11 20:15    [W:0.169 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site