lkml.org 
[lkml]   [2020]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: redundant check in make_data_reusable(): was [PATCH v2 2/3] printk: add lockless buffer
On Wed 2020-06-10 12:24:01, John Ogness wrote:
> On 2020-06-10, Petr Mladek <pmladek@suse.com> wrote:
> >> >> --- /dev/null
> >> >> +++ b/kernel/printk/printk_ringbuffer.c
> >> >> +/*
> >> >> + * Given a data ring (text or dict), put the associated descriptor of each
> >> >> + * data block from @lpos_begin until @lpos_end into the reusable state.
> >> >> + *
> >>>> + * If there is any problem making the associated descriptor reusable, either
> >>>> + * the descriptor has not yet been committed or another writer task has
> >>>> + * already pushed the tail lpos past the problematic data block. Regardless,
> >>>> + * on error the caller can re-load the tail lpos to determine the situation.
> >>>> + */
> >>>> +static bool data_make_reusable(struct printk_ringbuffer *rb,
> >>>> + struct prb_data_ring *data_ring,
> >>>> + unsigned long lpos_begin,
> >>>> + unsigned long lpos_end,
> >>>> + unsigned long *lpos_out)
> >>>> +{
> >>>> + struct prb_desc_ring *desc_ring = &rb->desc_ring;
> >>>> + struct prb_data_blk_lpos *blk_lpos;
> >>>> + struct prb_data_block *blk;
> >>>> + unsigned long tail_lpos;
> >>>> + enum desc_state d_state;
> >>>> + struct prb_desc desc;
> >>>> + unsigned long id;
> >>>> +
> >>>> + /*
> >>>> + * Using the provided @data_ring, point @blk_lpos to the correct
> >>>> + * blk_lpos within the local copy of the descriptor.
> >>>> + */
> >>>> + if (data_ring == &rb->text_data_ring)
> >>>> + blk_lpos = &desc.text_blk_lpos;
> >>>> + else
> >>>> + blk_lpos = &desc.dict_blk_lpos;
> >>>> +
> >>>> + /* Loop until @lpos_begin has advanced to or beyond @lpos_end. */
> >>>> + while ((lpos_end - lpos_begin) - 1 < DATA_SIZE(data_ring)) {
> >>>> + blk = to_block(data_ring, lpos_begin);
> >>>> + id = READ_ONCE(blk->id); /* LMM(data_make_reusable:A) */
> >>>> +
> >>>> + /*
> >>>> + * Guarantee the block ID is loaded before checking the tail
> >>>> + * lpos. The loaded block ID can only be considered valid if
> >>>> + * the tail lpos has not overtaken @lpos_begin. This pairs
> >>>> + * with data_alloc:A.
> >>>> + *
> >>>> + * Memory barrier involvement:
> >>>> + *
> >>>> + * If data_make_reusable:A reads from data_alloc:B, then
> >>>> + * data_make_reusable:C reads from data_push_tail:D.
> >>>> + *
> >>>> + * Relies on:
> >>>> + *
> >>>> + * MB from data_push_tail:D to data_alloc:B
> >>>> + * matching
> >>>> + * RMB from data_make_reusable:A to data_make_reusable:C
> >>>> + *
> >>>> + * Note: data_push_tail:D and data_alloc:B can be different
> >>>> + * CPUs. However, the data_alloc:B CPU (which performs
> >>>> + * the full memory barrier) must have previously seen
> >>>> + * data_push_tail:D.
> >>>> + */
> >>>> + smp_rmb(); /* LMM(data_make_reusable:B) */
> >>>> +
> >>>> + tail_lpos = atomic_long_read(&data_ring->tail_lpos
> >>>> + ); /* LMM(data_make_reusable:C) */
> >>>> +
> >>>> + /*
> >>>> + * If @lpos_begin has fallen behind the tail lpos, the read
> >>>> + * block ID cannot be trusted. Fast forward @lpos_begin to the
> >>>> + * tail lpos and try again.
> >>>> + */
> >>>> + if (lpos_begin - tail_lpos >= DATA_SIZE(data_ring)) {
> >>>> + lpos_begin = tail_lpos;
> >>>> + continue;
> >>>> + }
> >>>
> >>> I am sorry if we have had this discussion already in past.
> >>
> >> We have [0]. (Search for "Ouch.")
> >
> > I see. Thanks a lot for the pointer.
> >
> >>> Well, it would just prove that it really needs a comment why this
> >>> check is necessary.
> >>
> >> The comment says why it is necessary. The previous read of the block ID
> >> cannot be trusted if the the tail has been pushed beyond it.
> >
> > Not really. The comment describes what the check does. But it does not
> > explain why it is needed. The reason might be described be something like:
> >
> > * Make sure that the id read from tail_lpos is really
> > * pointing to this lpos. The block might have been
> > * reused in the meantime. Make sure to do not make
> > * the new owner reusable.
>
> That is _not_ what this check is doing. I recommend looking closely at
> the example you posted. This is not about whether or not a descriptor is
> pointing to this lpos. In your example you showed that ID, state, and
> lpos values could all look good, but it is for the _new_ record and we
> should _not_ invalidate that one.

OK, let's make sure that we are talking about the same example.
I was talking about this one from
https://lore.kernel.org/lkml/87ftecy343.fsf@linutronix.de/

% [*] Another problem would be when data_make_reusable() see the new
% data already in the committed state. It would make fresh new
% data reusable.
%
% I mean the following:
%
% CPU0 CPU1
%
% data_alloc()
% begin_lpos = dr->head_lpos
% data_push_tail()
% lpos = dr->tail_lpos
% prb_reserve()
% # reserve the location of current
% # dr->tail_lpos
% prb_commit()
%
% id = blk->id
% # read id for the freshly written data on CPU1
% # and happily make them reusable
% data_make_reusable()

Sigh, sigh, sigh, there is a hugely misleading comment in the example:

% # reserve the location of current
% # dr->tail_lpos

It is true that it reserves part of this location. But it will use
data_ring->head_lpos for the related desc->text_blk_lpos.begin !!!

See below:

> We can detect the scenario you pointed out by verifying the tail has not
> moved beyond the data block that the ID was read from. The comment for
> this check says:
>
> If @lpos_begin has fallen behind the tail lpos,
> the read block ID cannot be trusted.
>
> This is exactly the why. It is only about whether we can trust that a
> non-garbage block ID was read. Or do you want me to add:
>
> ... because data read that is behind the tail lpos must be
> considered garbage.
>
> > But wait! This situation should get caught by the two existing descriptor
> > checks:
> >
> >> case desc_committed:
> >> /*
> >> * This data block is invalid if the descriptor
> >> * does not point back to it.
> >> */
> >> if (blk_lpos->begin != lpos_begin)
> >> return false;
> >> desc_make_reusable(desc_ring, id);
> >> break;
> >> case desc_reusable:
> >> /*
> >> * This data block is invalid if the descriptor
> >> * does not point back to it.
> >> */
> >> if (blk_lpos->begin != lpos_begin)
> >> return false;
> >> break;
>
> No. Your example showed that it is not caught here.

I am afraid that my example was wrong:

If blk->id comes from the new descriptor written by CPU1 then
blk_lpos->begin is based on the old data_ring->head_lpos.
Then it is different from lpos_begin.


Let's put it another way. The state of the descriptor defines validity
of the data. Descriptor in committed state _must not_ point to invalid
data block!!!

If a descriptor in committed state point to lpos that was in invalid range
before reading the descriptor then we have a huge hole in the design.

This is why I believe that the check of the descriptor must be enough.


Best Regards,
Petr

PS: I am sorry if I create too much confusion. It is easy to
get lost :-(

\
 
 \ /
  Last update: 2020-06-11 15:55    [W:0.778 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site