lkml.org 
[lkml]   [2020]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] net: dsa: qca8k: Switch to PHYLINK instead of PHYLIB
Hi Russell,

On Thu, 11 Jun 2020 at 11:57, Russell King - ARM Linux admin
<linux@armlinux.org.uk> wrote:
>

>
> Alternatively, phylink supports polling mode, but due to the layered
> way DSA is written, DSA drivers don't have access to that as that is
> in the DSA upper levels in net/dsa/slave.c (dsa_slave_phy_setup(),
> it would be dp->pl_config.pcs_poll).
>

They do, see https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/tree/drivers/net/dsa/ocelot/felix.c#n606

>
> --
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTC for 0.8m (est. 1762m) line in suburbia: sync at 13.1Mbps down 503kbps up

Thanks,
-Vladimir

\
 
 \ /
  Last update: 2020-06-11 11:02    [W:0.090 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site