lkml.org 
[lkml]   [2020]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 11/12] PCI: qcom: Add Force GEN1 support
From
Date
Hi Ansuel,

Sorry that I didn't make this comment earlier.

The subject and description are misleading. The patch itself is not
forcing anything (the DT is filling the gen to 1), so please fix that.

On 6/10/20 7:06 PM, Ansuel Smith wrote:
> From: Sham Muthayyan <smuthayy@codeaurora.org>
>
> Add Force GEN1 support needed in some ipq8064 board that needs to limit
> some PCIe line to gen1 for some hardware limitation. This is set by the
> max-link-speed binding and needed by some soc based on ipq8064. (for
> example Netgear R7800 router)
>
> Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> drivers/pci/controller/dwc/pcie-qcom.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 259b627bf890..c40921589122 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -27,6 +27,7 @@
> #include <linux/slab.h>
> #include <linux/types.h>
>
> +#include "../../pci.h"
> #include "pcie-designware.h"
>
> #define PCIE20_PARF_SYS_CTRL 0x00
> @@ -99,6 +100,8 @@
> #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358
> #define SLV_ADDR_SPACE_SZ 0x10000000
>
> +#define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xa0
> +
> #define DEVICE_TYPE_RC 0x4
>
> #define QCOM_PCIE_2_1_0_MAX_SUPPLY 3
> @@ -195,6 +198,7 @@ struct qcom_pcie {
> struct phy *phy;
> struct gpio_desc *reset;
> const struct qcom_pcie_ops *ops;
> + int gen;
> };
>
> #define to_qcom_pcie(x) dev_get_drvdata((x)->dev)
> @@ -395,6 +399,11 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
> /* wait for clock acquisition */
> usleep_range(1000, 1500);
>
> + if (pcie->gen == 1) {
> + val = readl(pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2);
> + val |= PCI_EXP_LNKSTA_CLS_2_5GB;
> + writel(val, pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2);
> + }
>
> /* Set the Max TLP size to 2K, instead of using default of 4K */
> writel(CFG_REMOTE_RD_REQ_BRIDGE_SIZE_2K,
> @@ -1397,6 +1406,10 @@ static int qcom_pcie_probe(struct platform_device *pdev)
> goto err_pm_runtime_put;
> }
>
> + pcie->gen = of_pci_get_max_link_speed(pdev->dev.of_node);
> + if (pcie->gen < 0)
> + pcie->gen = 2;
> +
> res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
> pcie->parf = devm_ioremap_resource(dev, res);
> if (IS_ERR(pcie->parf)) {
>

--
regards,
Stan

\
 
 \ /
  Last update: 2020-06-11 09:36    [W:0.249 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site