lkml.org 
[lkml]   [2020]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v4 05/27] clk: bcm: rpi: Statically init clk_init_data
    Date
    Instead of declaring the clk_init_data and then calling memset on it, just
    initialise properly.

    Cc: Michael Turquette <mturquette@baylibre.com>
    Cc: Stephen Boyd <sboyd@kernel.org>
    Cc: linux-clk@vger.kernel.org
    Reviewed-by: Stephen Boyd <sboyd@kernel.org>
    Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
    Signed-off-by: Maxime Ripard <maxime@cerno.tech>
    ---
    drivers/clk/bcm/clk-raspberrypi.c | 3 +--
    1 file changed, 1 insertion(+), 2 deletions(-)

    diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
    index 8610355bda47..ddc72207212e 100644
    --- a/drivers/clk/bcm/clk-raspberrypi.c
    +++ b/drivers/clk/bcm/clk-raspberrypi.c
    @@ -175,11 +175,10 @@ static const struct clk_ops raspberrypi_firmware_pll_clk_ops = {

    static int raspberrypi_register_pllb(struct raspberrypi_clk *rpi)
    {
    + struct clk_init_data init = {};
    u32 min_rate = 0, max_rate = 0;
    - struct clk_init_data init;
    int ret;

    - memset(&init, 0, sizeof(init));

    /* All of the PLLs derive from the external oscillator. */
    init.parent_names = (const char *[]){ "osc" };
    --
    git-series 0.9.1
    \
     
     \ /
      Last update: 2020-06-11 09:34    [W:2.818 / U:0.052 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site